Spring Clamps with Flexible Arm
Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions. Squeeze the handles to open the clamp; release and the spring holds it tightly in place.
Magnetic-mount clamp attaches to steel surfaces.
Opening | Jaw | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity | Wd. | Material | Overall Lg. | Mount Type | Each | |
Steel Body | |||||||||
| 2" | 0" | 2 5/8" | Not Rated | 1" | Rubber | 22" | Magnetic | 00000000 | 000000 |
Easy On/Off Magnetic Clamps
Switch the magnets on these clamps on and off for easy placement and removal of your workpiece.
Clamps with two on/off switches have magnets on opposite sides that can be turned on and off independently, letting you adjust one workpiece while the other remains clamped in place. They’re commonly used to weld two pieces of metal together. These clamps also have two always-on magnets for holding and aligning additional workpieces.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angle | Lg. | Wd. | Ht. | Body Material | Features | Each | ||
| A | 65 | 45°, 60°, 75°, 90°, 105°, 120°, 135° | 3 1/2" | 2 1/16" | 3 1/2" | Steel | __ | 0000000 | 0000000 |
| B | 65 | 45°, 90° | 4 3/8" | 1" | 3 3/4" | Steel | __ | 0000000 | 00000 |
| B | 75 | 45°, 90° | 6" | 1 1/4" | 5 1/8" | Steel | __ | 0000000 | 00000 |
| B | 90 | 45°, 90° | 4 3/8" | 1 1/8" | 3 3/4" | Steel | __ | 0000000 | 00000 |
| B | 160 | 45°, 90° | 6" | 1 3/8" | 5 1/8" | Steel | __ | 0000000 | 00000 |
| C | 150 | 90° | 1 5/8" | 1 9/16" | 2 3/4" | Steel | __ | 0000000 | 00000 |
| C | 450 | 90° | 3" | 2 1/2" | 4 5/8" | Steel | __ | 0000000 | 000000 |
| C | 1,000 | 90° | 4 1/4" | 4" | 4 3/4" | Steel | __ | 0000000 | 000000 |
| D | 265 | 90° | 7 3/4" | 1 15/16" | 7 3/4" | Steel | Two On/Off Switches | 00000000 | 000000 |
Magnetic Clamps
Hold magnetic workpieces in place with these clamps.
100- and 325-lbs. maximum pull clamps have a handle for extra leverage to remove the clamp from a surface.
Copper-plated clamps won’t scratch steel surfaces. The plating prevents weld spatter from sticking to the clamp, so sharp spatter won’t cut the user or their workpiece.
Overall | ||||||
|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angle | Lg. | Wd. | Ht. | Each | |
Steel | ||||||
| 22 | 30°, 45°, 60°, 75°, 90° | 4" | 1/2" | 2 1/2" | 0000000 | 000000 |
| 55 | 30°, 45°, 60°, 75°, 90° | 4 3/8" | 3/4" | 3" | 0000000 | 00000 |
| 100 | 45°, 90°, 135° | 8" | 1 5/8" | 8" | 0000000 | 000000 |
| 110 | 30°, 45°, 60°, 75°, 90° | 4 3/8" | 1 9/16" | 3" | 0000000 | 00000 |
| 112 | 45°, 90°, 135° | 3 3/4" | 3/4" | 4 3/8" | 0000000 | 00000 |
| 325 | 45°, 90° | 8" | 1 1/2" | 8" | 0000000 | 000000 |
Copper-Plated Steel | ||||||
| 60 | 30°, 45°, 60°, 90° | 3 3/4" | 3/4" | 3 3/4" | 00000000 | 00000 |
| 60 | 45°, 90° | 3 3/4" | 3/4" | 3 3/4" | 00000000 | 00000 |
| 75 | 45°, 90° | 3 3/4" | 3/4" | 4 3/8" | 00000000 | 00000 |
Adjustable-Angle Magnetic Clamps
Two clamps connected by a pivoting arm hold workpieces at nearly any angle.
Overall | ||||||
|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angles | Lg. | Wd. | Ht. | Each | |
| 120 | 15°-180° | 7 5/8" | 3/4" | 3 3/4" | 0000000 | 000000 |
Miniature Adjustable-Angle Magnetic Clamps
Sized for small parts and tight spaces, these clamps have a pivoting pad at each end to hold workpieces at any angle up to 180°.
| Holding Angles | Number of Pieces | Includes | Each | |
| 0°-180° | 4 | Two 2 1/4" Lg. × 1" Wd. Clamps with 14 lbs. Max. Magnetic Pull Two 2 1/2" Lg. × 1 1/2" Wd. Clamps with 18 lbs. Max. Magnetic Pull | 0000000 | 000000 |
Easy On/Off Adjustable-Angle Magnetic Clamps
Each arm has a handle for turning the magnets on and off. Adjust these clamps to hold at any angle from 28° to 270° and lock the arms in place at the joint.
Arm | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Holding Angles | Lg. | Wd. | Ht. | Overall Lg. | Features | Each | |
| 200 | 28°-270° | 9 1/4" | 1 11/16" | 1 1/2" | 15 3/4" | Magnet On/Off Knobs | 0000000 | 0000000 |
Outside-Clamping Magnetic Clamps
Clamp workpieces from the outside at a 90° angle, leaving the inside free for welding or fabrication. You can also clamp on the inside at 45° and 90°.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| Max. Magnetic Pull, lbs. | Outside Holding Angle | Inside Holding Angle | Lg. | Wd. | Ht. | Each | |
| 40 | 90° | 45°, 90° | 3 7/8" | 11/16" | 3 7/8" | 0000000 | 000000 |
Quick-Release Magnetic Brackets
An on/off magnet control makes it easy to move and attach these brackets to metal surfaces. Secure items to the bracket plate. Magnets are made of neodymium (neodymium-iron-boron), a rare earth material. They have a case that concentrates and focuses the magnetic field. It also protects the magnetic material.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
Plate | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Pull, lbs. | Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | Handle Lg. | Case Material | Fasteners Included | Hole Thread Size  | Hole Dp. (Number of Holes) | Hole Center-to-Center Lg. | Hole Center-to-Center Wd. | Each | |
| 150 | 2" | 1 3/4" | 5/8" | 1 1/4" | 1 9/16" | 15/16" | 1 5/16" | Steel | No | M6 | 3/8" (2) | 1 3/16" | __ | 0000000 | 0000000 |
| 235 | 2 9/16" | 2 3/8" | 11/16" | 1 5/8" | 2 3/16" | 1 1/16" | 1 1/2" | Steel | No | M6 | 5/16" (2); 1/4" (1) | 9/16" | __ | 0000000 | 000000 |
| 245 | 3 15/16" | 2 1/2" | 7/8" | 2 13/16" | 2" | 7/8" | 2" | Steel | No | M6 | 3/8" (4) | 7/8" | 1 13/16" | 0000000 | 000000 |
| 400 | 2 9/16" | 2 3/8" | 11/16" | 1 5/8" | 2 1/2" | 1 7/8" | 2 3/8" | Steel | No | M6 | 5/16" (3) | 9/16" | __ | 0000000 | 000000 |
| 600 | 3 15/16" | 2 1/2" | 7/8" | 2 15/16" | 2" | 1 15/16" | 2" | Steel | No | M6 | 3/8" (4) | 7/8" | 1 13/16" | 0000000 | 000000 |
Easy On/Off Magnets with Mounting Flange
Turn these magnets on and they won’t budge from metal surfaces; turn them off to reposition or move them out of the way. They have a flange with screw holes on either side, so you can mount them to fixtures, jigs, and other assemblies. When these magnets are on, they apply downward pressure to anything below the flange. They’re made of neodymium, a rare earth material, with a nickel plating or powder coating that protects them from corrosion. A steel case focuses the magnetic field and prevents damage to the magnet surface. Since the magnetic field is turned on or off mechanically, they don’t need a power source. Unlike threaded clamps, these magnets are easy to wipe down, so they won’t get clogged with welding spatter or sawdust.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
Mounting | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg. | Ht. | Overall Ht. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Material | Case Material | Flange Material | Hole Dia. | Flange Lg. | Flange Wd. | Flange Ht. | Each | |
Magnets with Handle | ||||||||||||||||
| 7/8" | 1 1/8" | 1 1/4" | 2 1/4" | 95 | 1 | 180° | N45 | Nickel-Plated Neodymium (Rare Earth) | Nickel-Plated Steel | Aluminum | 3/16" | 2 1/4" | 7/8" | 1/2" | 0000000 | 000000 |
| 1 1/4" | 1 5/8" | 1 1/4" | 2 1/4" | 150 | 1 | 180° | N45 | Nickel-Plated Neodymium (Rare Earth) | Nickel-Plated Steel | Aluminum | 3/16" | 2 5/8" | 1 1/4" | 1/2" | 0000000 | 00000 |
Magnets with Knob | ||||||||||||||||
| 5/8" | 1" | 1 1/8" | 1 7/8" | 55 | 1 | 175° | N35 | Powder-Coated Neodymium (Rare Earth) | Zinc-Plated Steel | Aluminum | 3/16" | 1 9/16" | 1" | 3/8" | 00000000 | 00000 |
| 1 5/8" | 2 1/4" | 1 1/2" | 3 1/8" | 215 | 1 | 175° | N35 | Powder-Coated Neodymium (Rare Earth) | Zinc-Plated Steel | Aluminum | 1/4" | 3 7/16" | 2 3/8" | 3/4" | 00000000 | 000000 |
Easy On/Off Magnets
Turn the handle to switch these magnets on and off. They're made of neodymium, a rare earth material, with a nickel plating for protection in corrosive environments. A steel case concentrates and focuses the magnetic field. It also protects the magnetic material.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
| Wd. | Lg. | Ht. | Overall Ht. | Max. Pull, lbs. | Sets of Poles | Max. Temperature, °F | Magnet Grade | Material | Case Material | Thread Size | Thread Dp. | Number of Mounting Holes | Each | |
Magnet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7/8" | 1 1/8" | 1 1/4" | 2 1/8" | 95 | 1 | 180° | N45 | Nickel-Plated Neodymium (Rare Earth) | Nickel-Plated Steel | __ | __ | __ | 0000000 | 000000 |
| 1 1/4" | 1 5/8" | 1 1/4" | 2 1/8" | 150 | 1 | 180° | N45 | Nickel-Plated Neodymium (Rare Earth) | Nickel-Plated Steel | __ | __ | __ | 0000000 | 00000 |
Magnet with Threaded Hole | ||||||||||||||
| 1 1/2" | 1 3/4" | 1 3/4" | 3 1/8" | 150 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 8-32 | 5/16" | 12 | 0000000 | 000000 |
| 2 1/2" | 3" | 2 3/4" | 4 7/8" | 450 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 1/4"-20 | 1/2" | 14 | 0000000 | 000000 |
| 4" | 4 1/4" | 3" | 5 1/8" | 1,000 | 1 | 175° | N35 | Nickel-Plated Neodymium (Rare Earth) | Steel | 3/8"-16 | 5/8" | 14 | 0000000 | 000000 |