Hold these lightweight face shields up to your face for quick inspection of welding activity.

Prevent sunburn and heat stress. These neck gaiters stop 98% of the sun’s rays from hitting your face and neck. Since they prevent bacteria growth from sweat, they won’t smell. To cool yourself off, wet them with cold water and airflow will create a cool, damp feeling.

Weld with the same quality as you would in bright conditions. These helmets have a built-in LED light that brightens your workspace, so you can see your weld and maintain precision even in dark areas. Turn the LED light on with the press of a button, and when it detects an arc or intense light, the light automatically turns off.

As you begin to weld, four arc sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. To switch to grind mode without removing your helmet, use the button above the lens.

Get up close to your welds with these goggles. Their lightweight, compact design lets you weld in tight spots or awkward positions. A flame-resistant hood shields your ears, head, and neck from sparks and spatter better than traditional welding helmets. For different protection needs, wear them over prescription glasses, under a hard hat, or without the hood. Use the external controls to adjust power and shade settings without removing these goggles.

As you begin to weld, two sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these goggles use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

For full-face protection while welding, select one of these shields. All have a ratchet adjustment with an easy-turn knob.

Keep cool while staying shielded from flame and electrical hazards.

Filter out harmful air while you weld. These helmets have a built-in connection for the included powered air-purifying respirator (PAPR). The respirator supplies continuous filtered air to reduce breathing effort and minimize heat buildup inside these helmets. It also filters out at least 99.5% of harmful particles like smoke, aerosols, and dust. For comfortable all-day wear, they are lightweight and connect to a belt on your back for unrestricted movement. A rechargeable battery powers the respirator for up to 18 hours.

When you start to weld, five sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain. A nose cutout lets these helmets sit closer to your face for a six-times larger viewing area than standard helmets for higher quality welds. Without the need for a larger lens to enhance peripheral vision, these helmets are lighter and have longer battery life. Solar cells recharge the helmet’s battery while you work.

Protect your eyes the moment you start welding with a helmet that senses light and automatically darkens. You can change the shade of the lens without removing these helmets by using a Bluetooth-connected app. The app also monitors battery life and tracks the time spent cutting. Save up to 10 setting combinations to switch tasks quickly. Along with the app, these helmets use a tap function to switch between welding and grinding modes. To change modes, tap the side of the helmet twice.

To improve your weld quality and decrease eye strain, you can switch between cool, neutral, and warm tones. The true color lens enhances clarity and color accuracy to reduce the color distortion of your view.

Every inch of these helmets is designed to improve your welding experience. A rounded, slim design helps you fit in tight spaces. Levers adjust the helmet’s tilt and position on your head. The head suspension sits comfortably on the back of the head and balances the helmet’s weight for a barely-there feel. Side windows increase peripheral vision for high-quality welds.

No need for goggles or glasses under these helmets. They have two lenses to protect your eyes against welding laser light. A nose cutout lets these helmets sit closer to your face for a six-times larger viewing area than standard helmets for higher quality welds. Without the need for a larger lens to enhance peripheral vision, these helmets are lighter and have longer battery life. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They give you a better look at your weld pool to increase weld quality and reduce eye strain.

Absorb sweat and stay cool by wearing these bandanas around your head or neck. They meet NFPA 70E and ASTM F1506 standards, so they’re safe to wear when sparks are flying. To keep you cool, they contain water-absorbing crystals. Run these bandanas under cold water for a few minutes, then the crystals will relieve heat through evaporation for up to 4 hours. They're made of a soft, breathable cotton and modacrylic blend that resists flames and protects against radiant heat.

Get a broader look at your weld—these helmets fit close to your face for a view six times wider than standard welding helmets. Designed with a smaller lens than other wide-view helmets, they’re lighter in weight and require less battery to darken. When you start to weld, five sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They give you a better look at the weld pool to increase weld quality and reduce eye strain.

Built-in solar cells charge the helmet’s battery during use. You can also plug in the battery to charge it while you’re not working.

The coating on these face shields reflects radiant heat to keep your face cooler. Shields meet ANSI/ISEA Z87.1+ high-impact standards when worn with safety glasses or goggles.

Extenders for Face Shields—Attach shield extenders for an extra 3" of coverage on each side of your face. Once in place, they’ll overlap the face shields so nothing passes through.

Take full control of your shade level with these helmets—you can set the lens to adjust in half-shade increments. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. Save up to nine settings to quickly switch between tasks. To switch to grind mode without removing your helmet, press the button above the lens.

As you weld, four sensors detect the light and automatically darken the lens. To improve weld quality and reduce eye strain, these helmets have a wide panoramic view and a true color lens. The lens enhances clarity and color accuracy to reduce the color distortion of your view.

Solar cells recharge the helmet’s battery while you work.