McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    62 Products

    Drive Rivet Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Drive Rivet Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Concrete.
    Our strongest drive anchors are best for securing objects such as safety railings and warning signs. All have a rounded head that offers a finished look, won’t snag on objects, and is hard to grip, preventing unwanted removal. Often used for permanent installations, you can't remove your object without yanking the anchor out. These one-piece anchors compress when hammered in and expand inside a drilled hole, creating a powerful grip. No tightening is needed, making them quicker to install than wedge anchors.
    To install, hammer the anchor through your object into a drilled hole until the head is flush with the surface. The installation force stresses your base material, so avoid using the anchor near edges, corners, or in cracked surfaces.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 1/4"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A544000000
    1 1/2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A54600000
    2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A55000000
    2 1/2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteUL Listed
    		1097073A5530000
     
    3/8" Diameter
    2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		1097073A62000000
    2 1/2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		1097073A63400000
    3 1/2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		597073A63800000
     
    1/2" Diameter
    3"1"1/4"2 5/8"1/2"
    		4,80010,0004,000 psi ConcreteFM Approved, UL Listed
    		597073A72000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    3/16" Diameter
    1"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—1097073A80000000
    1 1/2"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—597073A8200000
    2"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—597073A83000000
     
    1/4" Diameter
    1 1/4"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A8400000
    1 1/2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A8500000
    2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A86000000
    2 1/2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A87000000
    3"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A88000000
     

    Drive Rivet Anchors for Block and Brick

    Fasten signs, security cameras, and motion detectors. All of these anchors have a rivet head that creates a secure connection with a finished look. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials. These anchors can be used in concrete near edges, corners, or other weak points, but they are not as strong as other drive rivet anchors for concrete.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    7/8"7/16"7/64"3/4"3/16"
    		SteelZinc4005604,000 psi ConcreteFM Approved
    		10097090A10200000
     
    1/4" Diameter
    3/4"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		5097090A10400000
    1"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1060000
    1"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A1300000
    1 1/4"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1080000
    1 1/4"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A1350000
    1 1/2"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1100000
    1 1/2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1400000
    2"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1120000
    2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1450000
    3"9/16"9/64"1 1/4"1/4"
    		SteelZinc9909704,000 psi Concrete—1097090A1180000
     
    Easy-Release Screw Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Block and Brick, Easy-Release Screw Drive Anchors.
    To remove, unthread the screw to release the anchor's grip and then pull out the anchor.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Screw
    Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    1/4" Diameter
    3/4"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		5097090A305000000
    1"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		5097090A31000000
    1 1/4"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A3150000
    1 1/2"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A32000000
    2"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A32500000
     

    Light Duty Anchors for Block and Brick

    These anchors grip the sides of your hole to resist twisting and pullout in block and brick. They’re an economical choice for mounting lightweight switches, security cameras, and clocks. All are the easiest anchors to install in block and brick but have the lowest strength.
    To install, drill a hole slightly deeper than the anchor is long. Next, insert the anchor until it's flush with the surface. Then, thread a tapping screw through your component into the anchor and tighten. Remove your component by unfastening the screw, but the anchor itself cannot be removed.
    Anchors with Screw
    Flanged Alligator—Best for installing in walls with hollow cavities, the flange keeps these anchors from being pushed through your hole. The anchors split in half inside the cavity for a secure hold. Projections on the anchors add gripping force to prevent twisting. Removing and reinstalling your screw will not lessen the strength.
    Lobed—As the anchors expand, lobes running down the entire length of the anchor firmly grip your hole to create the highest pull-out strengths of all our light duty anchors. However, removing and reinstalling the screw will weaken the strength.
    Screw
    Ultimate
    Strength
    Size
    Lg.
    Lg.
    Drill Bit
    Size
    Fastener
    Head Type
    Drive Style
    Material
    Pull-Out,
    lbf
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Flanged Alligator
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Anchors with Screw, Flanged Alligator.
    No. 10
    		1 1/2"1 3/16"1/4"
    		Rounded
    		Phillips/Slotted
    		Polypropylene640Not Rated3,500 psi Concrete5097065A400000000
     
    Lobed
    Image of Product. Front orientation. Anchors. Light Duty Anchors for Block and Brick, Anchors with Screw, Lobed.
    No. 6
    		1"1"3/16"
    		Rounded
    		Phillips/Slotted
    		PVC720Not Rated2,000 psi Concrete10098612A01000000
    No. 8
    		1"1"15/64"
    		Rounded
    		Phillips/Slotted
    		PVC1,080Not Rated2,000 psi Concrete10098612A01500000
    No. 10
    		1"1"1/4"
    		Rounded
    		Phillips/Slotted
    		PVC1,000Not Rated2,000 psi Concrete10098612A02000000
    No. 14
    		1 1/2"1 1/2"5/16"
    		Rounded
    		Phillips/Slotted
    		PVC1,680Not Rated2,000 psi Concrete5098612A02500000
     

    Light Duty Drive Rivet Anchors for Block and Brick

    A step up from a nail, the rivet head creates a secure connection with a finished look for mounting lightweight signs, screens, and panels. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    3/4"9/16"1/8"3/4"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A017000000
    1"9/16"1/8"1"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01000000
     
    1/4" Diameter
    3/4"9/16"7/64"3/4"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05000000
    3/4"9/16"1/8"3/4"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01300000
    1"9/16"7/64"1"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05100000
    1"9/16"1/8"1"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01600000
    1 1/2"9/16"7/64"1 1/2"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05200000
    1 1/2"9/16"1/8"1 1/2"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A04300000
     

    High-Strength Toggle Anchors for Drywall

    Image of ProductInUse. Front orientation. Anchors. High-Strength Toggle Anchors for Drywall.
    Image of Product. Front orientation. Contains Annotated. Anchors. High-Strength Toggle Anchors for Drywall.
    Our highest-strength drywall anchors are strong enough to secure pegboards, grab bars, and sinks. The toggle creates an extremely tight hold and won’t fall behind the wall when your screw is removed, so you can switch out components without losing strength. However, the anchor itself cannot be removed. Unlike traditional toggle bolt anchors, the toggle is pulled tight to the wall with the cap, which also covers the hole.
    To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap along the straps up to the wall. Push straps side-to-side, snapping them off so they're level with the cap. Next, position your component over the hole, insert a machine screw, and tighten. The minimum screw length is the wall and component thicknesses plus 1/2".
    Ultimate
    Strength, lbf
    For Thread
    Size
    Usable Lg.
    Drill Bit
    Size
    Wing
    Span
    Toggle Material
    Material
    Fastener
    Head Type
    Drive Style
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    10-24
    		3/8" to 3 5/8"1/2"
    		2"Zinc-Plated SteelPolystyreneRounded
    		Phillips/Slotted
    		2302401/2" Drywall1097802A321000000
    1/4"-20
    		3/8" to 3 5/8"1/2"
    		2"Zinc-Plated SteelPolystyreneRounded
    		Phillips/Slotted
    		2602401/2" Drywall597802A3230000

    Heavy Duty Pancake Head Tapping Screws for Masonry and Concrete

    Image of Product. Front orientation. Contains Annotated. Masonry and Concrete Screws. Heavy Duty Pancake Head Tapping Screws for Masonry and Concrete.
    Thin enough to sit nearly flush in masonry and concrete without countersinking. These screws also have a wide head that spreads pressure evenly to help prevent thin materials from deforming. Also known as Heavy Duty Tapcons, they have hardened steel threads that cut deep into concrete for a strong hold. Create a pilot hole using a hammer drill or rotary hammer and a compatible bit. Pull-out strength and shear strength values are 25% of the ultimate values.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Head
    Strength,
    lbf
    Lg.
    Drill Bit
    Size
    Thread
    Lg.
    Min. Installation
    Dp.
    Dia.
    Ht.
    Pull-Out
    Shear
    Conditions
    Tested In
    Drive
    Size
    Drive
    Style
    Certification
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/2" Screw Size
    6"1/2"
    		5 1/2"3 1/4"1 3/8"0.125"1,1001,2002,500 psi ConcreteT50Torx
    		ICC-ES Listed
    		193148A11100000
    8"1/2"
    		5 1/2"3 1/4"1 3/8"0.125"1,1001,2002,500 psi ConcreteT50Torx
    		ICC-ES Listed
    		193148A1120000
     
    5/8" Screw Size
    6"5/8"
    		5 1/2"4"1 3/4"0.16"1,1002,7002,500 psi ConcreteT60Torx
    		ICC-ES Listed
    		193148A1130000
    8"5/8"
    		5 1/2"4"1 3/4"0.16"1,1002,7002,500 psi ConcreteT60Torx
    		ICC-ES Listed
    		193148A11400000
    10"5/8"
    		5 1/2"4"1 3/4"0.16"1,1002,7002,500 psi ConcreteT60Torx
    		ICC-ES Listed
    		193148A11500000
     

    Light Duty Drive Rivet Anchors for Concrete

    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Concrete.
    More secure than masonry nails but not as strong as other anchors for concrete, these are often used to mount lightweight signs and control panels. Also known as tap-in rivets, they’re barbed to resist pullout after being hammered into a hole. All have a rounded head for a finished look that won’t snag on objects.
    To install, hammer the anchor through your component into a drilled hole that’s slightly longer than the anchor until the head is flush with the surface. The anchor will compress and then expand inside the hole. To remove, pry out the anchor.
    Nylon—Strong, durable, and economical. Best for dry environments, these anchors will swell and weaken when exposed to moisture.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Nylon
     
    9/32" Diameter
    1"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete10092410A411000000
    1 5/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete5092410A41200000
    2 1/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete5092410A41300000
    2 5/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete2592410A41400000
    3 1/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete2592410A41500000
     

    Tamper-Resistant Tapping Screws for Masonry and Concrete

    Image of Attribute. Front orientation. Contains Annotated. Masonry and Concrete Screws. Tamper-Resistant Tapping Screws for Masonry and Concrete, Corrosion-Resistant-Coated Steel with Rounded Head.
    Image of Specification. Front orientation. Tamper-Resistant Torx Drive.

    Corrosion-Resistant-Coated

    Steel with Rounded Head

    Tamper-Resistant

    Torx Drive

    Deter unauthorized access. With a six-lobe recess and security pin in the drive, these screws require a tamper-resistant bit to install and remove. To create a pilot hole, use a hammer drill or rotary hammer and a compatible bit. Pull-out strength and shear strength are 25% of the ultimate values.
    Rounded Head—A low, rounded top gives these screws a finished appearance.
    Screws
    Power Tool Bits
    Head
    Strength,
    lbf
    Lg.
    Drill Bit
    Size
    Thread
    Lg.
    Min. Installation
    Dp.
    Dia.
    Ht.
    Pull-Out
    Shear
    Conditions
    Tested In
    Drive
    Size
    Drive Style
    Pkg.
    Qty.
    Pkg.
    Each
    Corrosion-Resistant-Coated Steel with Rounded Head
     
    1/4" Screw Size
    1 1/4"3/16"
    		1 3/32"1"7/16"1/8"1902253,000 psi ConcreteT27Tamper-Resistant Torx
    		1093341A121000007233A6700000
    1 3/4"3/16"
    		1 1/4"1"7/16"1/8"1902253,000 psi ConcreteT27Tamper-Resistant Torx
    		1093341A12200007233A670000
    2 1/4"3/16"
    		1 1/4"1"7/16"1/8"1902253,000 psi ConcreteT27Tamper-Resistant Torx
    		1093341A12300007233A670000
    2 3/4"3/16"
    		1 1/4"1"7/16"1/8"1902253,000 psi ConcreteT27Tamper-Resistant Torx
    		1093341A12400007233A670000
     
    back to top