We will reply to your message within an hour.
These sets include an assortment of sockets and wrenches for occasional maintenance work.
What you need for most maintenance jobs, these sets include an assortment of drivers, cutters, pliers, and wrenches.
Also known as jewelers' screwdrivers.
Slide a different shaft into a handle to change tip size or drive style.
You only need one tool—slide a different shaft into the handle to change tip size or drive style.
These tools have an insulated grip to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.
Made of materials that are Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
For high quality at a lower price, choose these U.S.A.-made sets.
Suitable for occasional maintenance work, these sets are imported.
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Pivot the head to access fasteners from an angle.
Quickly position these sockets on square fasteners.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
Grip the indentations around the outside of tri-groove fasteners.
Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Extra-long bits allow access to hard-to-reach fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-Torx bits.
These sockets are also known as pin-in-hex or pin-in-socket bits.
Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
Turn nuts on bolts and threaded rods, which pass through these sockets.
Convert from one square drive size to another.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
These sockets are made to withstand the high torque and force of impact tools.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
Remove and install dual wheels on trucks and trailers with the sockets in these sets.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Quickly find the wrenches you're looking for with these brightly colored sets.
These wrenches are made of stainless steel for excellent corrosion resistance.
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.
When working in tight spaces, these short wrenches fit where others can't.
Pivot the box end for access to fasteners in tight spots.
Flip these wrenches over to ratchet in the opposite direction.
A lever reverses the ratchet direction.
A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.
The handles are covered in plastic for a comfortable grip.
Open the jaws to fit around a fastener like an open-end wrench; close the jaws and the wrench acts like a ratcheting box wrench.
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.
The heads are offset to provide clearance for reaching over obstructions.
The heads are offset 45° to provide clearance for reaching over obstructions.
These wrenches are polished for a mirror-like finish.
The slim heads fit into tight spaces and around thin fasteners.
Fit the narrow head into tight spaces and around thin fasteners.
One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.
These lightweight tools are also known as AN (Army-Navy) wrenches.
Made of stainless steel, these wrenches have excellent corrosion resistance.
One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.
Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.
When turning fasteners in small spaces, these short wrenches fit where others can't.
The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.
These wrenches have one pivoting socket end and one open end.
Sets include various sizes of wrenches that fit into slots on the circumference of collars, bearings, and other machine tool components.
The head pivots to accommodate a range of diameters.
Sets include various sizes of wrenches that are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.