Also known as AC cable, this cable has an uninsulated aluminum ground wire that's in constant contact with the aluminum armor, so it can be used for bonding and grounding. The uninsulated ground wire is not counted in the number of wires. The armor acts as conduit to protect the THHN building wires. It's often used along the exterior of walls to carry power to outlet boxes. All are flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Also known as fixture whips, this cable has locknuts and fittings attached to the metal armor to secure to a knockout. The armor acts as conduit to protect the THHN building wires. It has 6" long wire leads for hardwiring to an existing electrical system, and is often used to connect light fixtures.

Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable. Also known as metal clad (MC) cable, the metal armor acts as a conduit to protect the wires inside. The PVC inner insulation resists flames. Its nylon jacket is low smoke, so it can be used without conduit in duct work, under raised floors, and above a drop ceiling. This cable has a ground wire that is not counted in the number of wires.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it’s rated for your environment.

Shielded cable has a layer of foil that blocks signal interference from nearby equipment and devices.

For technical drawings and 3-D models, click on a part number.

Also known as plenum cable, this FPLP cable has low-smoke insulation and can be used without conduit in duct work and above a drop ceiling. The insulation is also flame resistant for use in critical circuits such as fire alarm systems and smoke detectors.

Use unshielded cable in applications where signal interference is not a concern.

Shielded cable has a layer of foil that blocks signal interference from nearby equipment and devices. It has an uninsulated ground wire that is not counted in the number of wires.

The chlorinated polyethylene insulation resists corrosive chemicals and salt water, and the wires are tin plated for corrosion resistance. This cable also withstands oil and solvents. It’s rated UL 1309 for use as marine shipboard cable.

Cable with braided bronze armor has excellent protection against abrasion and other damage.

For technical drawings and 3-D models, click on a part number.

Transfer power between your door frame and door to power electric locks or exit devices. These cords mount on the surface of the door, rather than inside the frame, so they’re easier to install than other power transfer devices such as hinges and mortises. A stainless steel armor protects the wire leads and prevents tampering with your lock. Wire leads are included, so they come ready to hardwire into your system. Cords meet UL 10C to prevent the spread of fire through doors and door frames.

Choose a cord based on your door's opening direction. For doors that open outward, the cord is longer to accommodate the extra distance the door moves as it swings away from the frame.

Step on or roll carts and platform trucks over these M12 cords without crushing them. A protective layer of stainless steel makes these the most crush- and abrasion-resistant M12 cords we offer. It also prevents damage from pests that chew through cords. The stainless steel and PVC outer layer keep moisture from corroding the cord, so they can be used outdoors and near chemicals as well. Despite the stainless steel covering, these cords are still flexible enough to route around equipment. Threaded ends create a tight connection that seals out contaminants and won’t shake loose from the vibration of automated machines.

These cords have a standardized code layout to reduce the chances of accidentally mis-mating them. All are A-coded to send signal and power to AC and DC devices. A-coded cords are often used with sensors, actuators, and motors in automated systems. They also connect devices to IO Link controllers and within fieldbus systems, such as Profibus and DeviceNet.

When mated or capped, these cords meet IP ratings. IP67 cords withstand temporary submersion. IP69 cords are protected from dust and high-pressure, high-temperature washdowns.

Add caps to protect connectors and maintain their IP ratings when not in use.

Note: Sockets may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

The insulation serves as a tough armor that protects these cords in high-traffic areas. These cords have braided and foil shielding, which reduces signal interference from nearby equipment and devices. They’re backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Stainless steel armor is more crush resistant than PVC armor.