McMaster-Carr logo
    Filter by
    For Rigid Conduit Trade Size
    Industrial Info Snippet
    For EMT Conduit Trade Size
    Industrial Info Compare
    Screw Material
    For IMC Conduit Trade Size
    Industrial Info Compare
    Mounting Location
    Mounting Position
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Clamp Type
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    416 Products

    Strut Channel Type

    Strut Channel Type

    Strut Channel Routing Clamps

    Image of ProductInUse. Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Routing Clamps.
    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Routing Clamps, Style 1.
    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Routing Clamps, Style 2.

    Clamp Shown Installed

    Style 1

    Style 2

    Run pipe, conduit, and tubing through your facility by attaching it to strut channel. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed. Just slide clamps into the end of channel and tighten the screw.
    Style 2—The screw is angled for easy access with a screwdriver or drill where pipe, conduit, and tubing run in parallel.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Copper-Plated Steel—Shield copper pipe and tubing from galvanic corrosion that other metal routing clamps can cause. These also prevent scratches to pipe and resist rust in wet environments.
    304 Stainless Steel—The choice for wet and outdoor environments, these resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    PVC-Coated Steel—With a layer of PVC, these won't wear or cut into PVC-coated conduit and tubing. This keeps the coating intact to prevent rust and extend the life of conduit in high-vibration environments.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
    Style 1
     
    Zinc-Plated Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—3115T11900000
    3/8"10—1 5/8"1/2"1 1/4"1 13/16"1/16"400—3115T1220000
    1/2"131/8
    		1 5/8"5/8"1 1/4"1 15/16"1/16"400—3115T3510000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—3115T0610000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—3115T130000
    5/8"161/2
    		1 5/8"3/4"1 1/4"2 3/16"1/16"400—3115T810000
    3/4"193/8
    		1 5/8"7/8"1 1/4"2 1/4"1/16"400—3115T5120000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—3115T140000
    7/8"221/2
    		1 5/8"1"1 1/4"2 5/16"1/16"400—3115T3530000
    15/16"243/4
    		1 5/8"1 1/16"1 1/4"2 7/16"5/64"600—3115T770000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—3115T150000
    1 1/8"293/4
    		1 5/8"1 1/4"1 1/4"2 5/8"5/64"600—3115T3540000
    1 3/16"301
    		1 5/8"1 5/16"1 1/4"2 11/16"5/64"600—3115T830000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—3115T160000
    1 3/8"351
    		1 5/8"1 1/2"1 1/4"2 7/8"5/64"600—3115T3550000
    1 7/16"371 1/4
    		1 5/8"1 9/16"1 1/4"3 1/16"5/64"600—3115T840000
    1 5/8"411 1/4
    		1 5/8"1 3/4"1 1/4"3 1/8"5/64"600—3115T3560000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—3115T170000
    1 11/16"431 1/2
    		1 5/8"1 7/8"1 1/4"3 5/16"7/64"800—3115T850000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—3115T180000
    2 1/8"54—1 5/8"2 5/16"1 1/4"3 5/8"7/64"800—3115T3570000
    2 3/16"562
    		1 5/8"2 3/8"1 1/4"3 3/4"7/64"800—3115T860000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—3115T190000
    2 5/8"67—1 5/8"2 13/16"1 1/4"4"7/64"800—3115T3580000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—3115T210000
    3 1/8"79—1 5/8"3 5/16"1 1/4"4 7/16"7/64"800—3115T3590000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T220000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 1/8"1/8"1,000—3115T3610000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—3115T230000
    4 1/8"1053 1/2
    		1 5/8"4 3/8"1 1/4"5 11/16"1/8"1,000—3115T3620000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—3115T240000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—3115T0620000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—3115T250000
    6 1/8"155—1 5/8"6 3/8"1 1/4"8 3/8"9/64"1,000—3115T5190000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—3115T2600000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—3115T06300000
    8 1/8"206—1 5/8"8 3/8"1 1/4"9 7/8"9/64"1,000—3115T52100000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—3115T2700000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—3115T2800000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—3115T11200000
    13"330—1 5/8"13 1/4"1 1/4"16"9/64"1,000—3115T06400000
    14"356141 5/8"14 1/4"1 1/4"17"9/64"1,000—3115T06500000
    15"381—1 5/8"15 1/4"1 1/4"18"9/64"1,000—3115T06600000
    16"406161 5/8"16 1/4"1 1/4"19"9/64"1,000—3115T06700000
    17"431—1 5/8"17 1/4"1 1/4"20"9/64"1,000—3115T06800000
    18"457181 5/8"18 1/4"1 1/4"21"9/64"1,000—3115T06900000
    19"482—1 5/8"19 1/4"1 1/4"22"9/64"1,000—3115T07100000
    20"508201 5/8"20 1/4"1 1/4"23"9/64"1,000—3115T07200000
     
    Copper-Plated Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—3115T5220000
    3/8"10—1 5/8"1/2"1 1/4"1 13/16"1/16"400—3115T1230000
    1/2"131/8
    		1 5/8"5/8"1 1/4"1 15/16"1/16"400—3115T290000
    5/8"163/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—3115T310000
    3/4"193/8
    		1 5/8"7/8"1 1/4"2 1/4"1/16"400—3115T0010000
    7/8"221/2
    		1 5/8"1"1 1/4"2 5/16"1/16"400—3115T110000
    1 1/8"293/4
    		1 5/8"1 1/4"1 1/4"2 5/8"5/64"600—3115T320000
    1 3/8"351
    		1 5/8"1 1/2"1 1/4"2 7/8"5/64"600—3115T330000
    1 5/8"411 1/4
    		1 5/8"1 3/4"1 1/4"3 1/8"5/64"600—3115T120000
    1 11/16"421 1/4
    		1 5/8"1 13/16"1 1/4"3 3/16"5/64"600—3115T5320000
    1 7/8"471 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—3115T5330000
    2 1/8"54—1 5/8"2 5/16"1 1/4"3 9/16"7/64"800—3115T350000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—3115T5350000
    2 5/8"67—1 5/8"2 13/16"1 1/4"4 3/16"7/64"800—3115T360000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—3115T5360000
    3 1/8"79—1 5/8"3 5/16"1 1/4"4 11/16"7/64"800—3115T370000
    3 1/2"883
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T5370000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 1/4"1/8"1,000—3115T980000
    4 1/8"1053 1/2
    		1 5/8"4 3/8"1 1/4"5 3/4"1/8"1,000—3115T390000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—3115T5390000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—3115T5410000
    5 1/8"130—1 5/8"5 3/8"1 1/4"6 13/16"1/8"1,000—3115T00200000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—3115T54200000
    6 1/8"155—1 5/8"6 3/8"1 1/4"8 3/8"9/64"1,000—3115T00300000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"9/64"1,000—3115T54300000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—3115T54400000
    8 1/8"206—1 5/8"8 3/8"1 1/4"9 7/8"9/64"1,000—3115T00400000
     
    304 Stainless Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—3115T5540000
    3/8"9—1 5/8"1/2"1 1/4"1 13/16"1/16"400—3115T0280000
    1/2"121/4
    		1 5/8"11/16"1 1/4"1 15/16"1/16"400—3115T0290000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—3115T0050000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—3115T410000
    11/16"173/8
    		1 5/8"13/16"1 1/4"2 3/16"1/16"400—3115T0060000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—3115T420000
    7/8"221/2
    		1 5/8"1 1/16"1 1/4"2 5/16"1/16"400—3115T0070000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"400—3115T0180000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—3115T430000
    1 1/8"283/4
    		1 5/8"1 5/16"1 1/4"2 5/8"5/64"600—3115T0080000
    1 1/4"311
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—3115T0190000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—3115T440000
    1 1/2"38—1 5/8"1 11/16"1 1/4"3 1/16"5/64"600—3115T0090000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—3115T450000
    1 11/16"421 1/4
    		1 5/8"1 15/16"1 1/4"3 5/16"7/64"800—3115T01100000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—3115T4600000
    2 3/16"552
    		1 5/8"2 7/16"1 1/4"3 3/4"7/64"800—3115T01200000
    2 5/16"582
    		1 5/8"2 9/16"1 1/4"4"7/64"800—3115T02300000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—3115T4700000
    2 5/8"66—1 5/8"2 13/16"1 1/4"4 5/16"7/64"800—3115T55900000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—3115T4800000
    3 1/8"79—1 5/8"3 5/16"1 1/4"5 1/16"7/64"800—3115T56100000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T4900000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 5/16"1/8"1,000—3115T56200000
    3 7/8"983 1/2
    		1 5/8"4 3/16"1 1/4"5 3/4"1/8"1,000—3115T02600000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—3115T5100000
    4 1/8"1043 1/2
    		1 5/8"4 3/8"1 1/4"5 7/8"1/8"1,000—3115T56300000
    4 7/16"112—1 5/8"4 11/16"1 1/4"6 1/4"1/8"1,000—3115T02700000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—3115T5200000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—3115T03100000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—3115T5300000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—3115T5400000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—3115T03200000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—3115T6600000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—3115T6700000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—3115T11300000
     
    316 Stainless Steel
    1/4"6—1 5/8"3/8"1 1/4"1 11/16"1/16"400—3115T5640000
    3/8"9—1 5/8"1/2"1 1/4"1 13/16"1/16"400—3115T0560000
    1/2"141/4
    		1 5/8"11/16"1 1/4"1 15/16"1/16"400—3115T0570000
    9/16"141/4
    		1 5/8"11/16"1 1/4"2"1/16"400—3115T0330000
    5/8"153/8
    		1 5/8"3/4"1 1/4"2 1/16"1/16"400—3115T940000
    11/16"173/8
    		1 5/8"13/16"1 1/4"2 3/16"1/16"400—3115T0340000
    3/4"191/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—3115T0450000
    13/16"211/2
    		1 5/8"15/16"1 1/4"2 1/4"1/16"400—3115T960000
    7/8"221/2
    		1 5/8"1 1/16"1 1/4"2 5/16"1/16"400—3115T0350000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"400—3115T04600000
    1"253/4
    		1 5/8"1 3/16"1 1/4"2 9/16"5/64"600—3115T5600000
    1 1/8"283/4
    		1 5/8"1 5/16"1 1/4"2 5/8"5/64"600—3115T03600000
    1 1/4"311
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—3115T04700000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"2 7/8"5/64"600—3115T5700000
    1 1/2"38—1 5/8"1 11/16"1 1/4"3 1/16"5/64"600—3115T03700000
    1 5/8"411 1/4
    		1 5/8"1 13/16"1 1/4"3 1/4"5/64"600—3115T5800000
    1 11/16"421 1/4
    		1 5/8"1 15/16"1 1/4"3 5/16"7/64"800—3115T03800000
    1 7/8"481 1/2
    		1 5/8"2 1/16"1 1/4"3 1/2"7/64"800—3115T5900000
    2 3/16"552
    		1 5/8"2 7/16"1 1/4"3 3/4"7/64"800—3115T03900000
    2 3/8"602
    		1 5/8"2 9/16"1 1/4"4"7/64"800—3115T6100000
    2 5/8"66—1 5/8"2 13/16"1 1/4"4 5/16"7/64"800—3115T57100000
    2 7/8"732 1/2
    		1 5/8"3 1/16"1 1/4"4 9/16"7/64"800—3115T6200000
    3 1/8"79—1 5/8"3 5/16"1 1/4"5 1/16"7/64"800—3115T57200000
    3 7/16"873
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T05300000
    3 1/2"893
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T6300000
    3 5/8"923
    		1 5/8"3 7/8"1 1/4"5 5/16"1/8"1,000—3115T57300000
    3 15/16"1003 1/2
    		1 5/8"4 3/16"1 1/4"5 3/4"1/8"1,000—3115T05400000
    4"1023 1/2
    		1 5/8"4 1/4"1 1/4"5 3/4"1/8"1,000—3115T6400000
    4 1/8"1043 1/2
    		1 5/8"4 3/8"1 1/4"5 7/8"1/8"1,000—3115T57400000
    4 7/16"112—1 5/8"4 11/16"1 1/4"6 1/4"1/8"1,000—3115T05500000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—3115T6500000
    5"127—1 5/8"5 1/4"1 1/4"6 3/4"1/8"1,000—3115T05800000
    5 9/16"1415
    		1 5/8"5 13/16"1 1/4"7 3/4"1/8"1,000—3115T11500000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"1/8"1,000—3115T11600000
    7 5/8"19371 5/8"7 7/8"1 1/4"9 3/8"9/64"1,000—3115T05900000
    8 5/8"2198
    		1 5/8"8 7/8"1 1/4"10 3/8"1/8"1,000—3115T11700000
    10 3/4"27310
    		1 5/8"11"1 1/4"13"1/8"1,000—3115T11800000
    12 3/4"32412
    		1 5/8"13"1 1/4"15"1/8"1,000—3115T11400000
     
    PVC-Coated Steel
    5/8"161/2
    		1 5/8"3/4"1 1/4"2 3/16"5/64"400—3115T710000
    15/16"243/4
    		1 5/8"1 1/16"1 1/4"2 7/16"1/16"600—3115T720000
    1 3/16"301
    		1 5/8"1 5/16"1 1/4"2 11/16"5/64"600—3115T730000
    1 7/16"371 1/4
    		1 5/8"1 9/16"1 1/4"3 1/16"5/64"600—3115T740000
    1 11/16"431 1/2
    		1 5/8"1 7/8"1 1/4"3 5/16"7/64"800—3115T750000
    2 3/16"562
    		1 5/8"2 3/8"1 1/4"3 3/4"7/64"800—3115T760000
    3 1/2"883
    		1 5/8"3 11/16"1 1/4"5 1/4"7/64"800—3115T55100000
    4 1/2"1144
    		1 5/8"4 3/4"1 1/4"6 1/4"1/8"1,000—3115T55200000
    6 5/8"1686
    		1 5/8"6 7/8"1 1/4"8 7/8"9/64"1,000—3115T55300000
     
    Style 2
     
    Zinc-Plated Steel
    13/16"211/2
    		1 5/8"1 1/16"1 1/4"2 1/2"5/64"400C-UL Listed, UL Listed3979T140000
    1 1/16"273/4
    		1 5/8"1 5/16"1 1/4"2 3/4"5/64"500C-UL Listed, UL Listed3979T150000
    1 5/16"331
    		1 5/8"1 7/16"1 1/4"3 1/8"5/64"500C-UL Listed, UL Listed3979T160000
    1 11/16"431 1/4
    		1 5/8"1 15/16"1 1/4"3 1/2"5/64"500C-UL Listed, UL Listed3979T170000
    1 7/8"481 1/2
    		1 5/8"2 1/8"1 1/4"4"7/64"800C-UL Listed, UL Listed3979T180000
    2 3/8"602
    		1 5/8"2 5/8"1 1/4"4 1/2"7/64"800C-UL Listed, UL Listed3979T190000
     

    Vibration-Damping Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset. Strut Channel Framing and Fittings. Vibration-Damping Strut Channel Routing Clamps.
    Absorb shock and muffle noise from rattling pipes. The cushion inside these clamps reduces vibration to extend the life of your pipe, tubing, and conduit. Slide clamps into your strut channel and tighten the nut to secure. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—The zinc plating protects these clamps from occasional exposure to moisture.
    304 Stainless Steel and 316 Stainless Steel—The choice for wet environments, these clamps resist rust.
    Flammability Rating—UL 2043 certified to generate minimal smoke in the event of a fire. These are a good choice for spaces that could spread smoke through your HVAC system, such as air intakes and ducts.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Flammability
    Rating
    Features
    Each
    Zinc-Plated Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T4900000
    3/8"10—1 5/8"13/16"1 1/4"1 7/8"5/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T510000
    1/2"131/8
    		1 5/8"15/16"1 1/4"2"3/8"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T520000
    9/16"141/4
    		1 5/8"1"1 1/4"2"7/16"1/16"Not Rated-50 to 270——32625T170000
    5/8"161/4
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T530000
    11/16"173/8
    		1 5/8"1 1/8"1 1/4"2 3/16"1/2"1/16"Not Rated-50 to 270——32625T180000
    3/4"193/8
    		1 5/8"1 3/16"1 1/4"2 3/8"1/2"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T540000
    13/16"201/2
    		1 5/8"1 5/16"1 1/4"1 3/4"1/2"1/16"600-65 to 275UL 2043
    		—32625T2110000
    13/16"211/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270——32625T710000
    7/8"221/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T550000
    1"253/4
    		1 5/8"1 7/16"1 1/4"2 5/8"5/8"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T560000
    1"253/4
    		1 5/8"1 11/16"1 1/4"2"11/16"1/16"600-65 to 275UL 2043
    		—32625T2120000
    1 1/16"273/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T190000
    1 1/8"293/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T570000
    1 1/4"321
    		1 5/8"1 11/16"1 1/4"2 7/8"3/4"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T580000
    1 1/4"321
    		1 5/8"1 15/16"1 1/4"2 5/16"3/4"1/16"600-65 to 275UL 2043
    		—32625T2130000
    1 5/16"331
    		1 5/8"1 3/4"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T720000
    1 3/8"351
    		1 5/8"1 13/16"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T590000
    1 1/2"38—1 5/8"1 15/16"1 1/4"3 3/16"7/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T610000
    1 9/16"40—1 5/8"2 1/4"1 1/4"2 3/4"15/16"7/64"600-65 to 275UL 2043
    		—32625T2140000
    1 5/8"411 1/4
    		1 5/8"2 1/16"1 1/4"3 7/16"15/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T620000
    1 11/16"431 1/4
    		1 5/8"2 3/16"1 1/4"3 7/16"1"7/64"Not Rated-50 to 270——32625T210000
    1 3/4"441 1/4
    		1 5/8"2 3/16"1 1/4"3 9/16"1"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T310000
    1 7/8"481 1/2
    		1 5/8"2 5/16"1 1/4"3 3/4"1 1/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T730000
    1 15/16"501 1/2
    		1 5/8"2 3/4"1 1/4"3 1/4"1 3/16"7/64"800-65 to 275UL 2043
    		—32625T2150000
    2"511 1/2
    		1 5/8"2 7/16"1 1/4"3 13/16"1 1/8"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T630000
    2 1/8"54—1 5/8"2 9/16"1 1/4"4"1 1/4"7/64"3,600-50 to 275UL 2043
    		Thumb Grip32625T640000
    2 1/4"57—1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T2600000
    2 3/8"602
    		1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"7/64"Not Rated-50 to 275UL 2043
    		Thumb Grip32625T7400000
    2 3/8"602
    		1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-65 to 275UL 2043
    		—32625T320000
    2 1/2"632
    		1 5/8"3 1/2"1 1/4"4"1 1/2"7/64"800-65 to 275UL 2043
    		—32625T21600000
    2 1/2"642
    		1 5/8"2 15/16"1 1/4"4 1/2"1 7/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T3300000
    2 5/8"67—1 5/8"3 1/16"1 1/4"4 5/8"1 1/2"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T7900000
    2 7/8"732 1/2
    		1 5/8"3 5/16"1 1/4"4 7/8"1 11/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T7500000
    2 15/16"752 1/2
    		1 5/8"4"1 1/4"4 1/2"1 3/4"7/64"800-65 to 275UL 2043
    		—32625T21700000
    3"762 1/2
    		1 5/8"3 9/16"1 1/4"5"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T3400000
    3 1/8"79—1 5/8"3 9/16"1 1/4"5 1/8"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T3500000
    3 1/2"893
    		1 5/8"3 15/16"1 1/4"5 9/16"2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T3600000
    3 9/16"903
    		1 5/8"4 3/8"1 1/4"4 15/16"2"7/64"1,000-65 to 275UL 2043
    		—32625T21800000
    3 5/8"923
    		1 5/8"4 3/16"1 1/4"5 7/8"2"5/64"Not Rated-50 to 270——32625T22300000
    4"1023 1/2
    		1 5/8"4 7/16"1 1/4"6 3/16"2 1/4"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T9100000
    4 1/8"1053 1/2
    		1 5/8"4 9/16"1 1/4"6 1/4"2 5/16"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T6600000
    4 5/16"110—1 5/8"5 5/16"1 1/4"5 3/4"2 7/16"7/64"1,000-65 to 275UL 2043
    		—32625T21900000
    4 3/8"1114
    		1 5/8"6 1/8"1 1/4"6 9/16"2 11/16"7/64"1,000-65 to 275UL 2043
    		—32625T22100000
    4 1/2"1144
    		1 5/8"4 15/16"1 1/4"6 7/8"2 1/2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T16300000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T6800000
    6 5/16"160—1 5/8"7 11/16"1 1/4"7 15/16"3 7/16"7/64"1,000-65 to 275UL 2043
    		—32625T22200000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T7600000
    8 5/8"2198
    		1 5/8"9 5/16"1 1/4"11 1/4"5"1/8"1,000-65 to 275UL 2043
    		—32625T2200000
     
    304 Stainless Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T370000
    3/8"10—1 5/8"13/16"1 1/4"1 7/8"5/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T380000
    1/2"131/8
    		1 5/8"15/16"1 1/4"2"3/8"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T390000
    9/16"141/4
    		1 5/8"1"1 1/4"2"7/16"1/16"Not Rated-50 to 270——32625T230000
    5/8"161/4
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"1/16"1,000-50 to 275UL 2043
    		Thumb Grip32625T410000
    11/16"173/8
    		1 5/8"1 1/8"1 1/4"2 3/16"1/2"1/16"Not Rated-50 to 270——32625T810000
    3/4"193/8
    		1 5/8"1 3/16"1 1/4"2 3/8"1/2"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T420000
    13/16"211/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270——32625T8200000
    7/8"221/2
    		1 5/8"1 5/16"1 1/4"2 1/2"9/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T19700000
    1"253/4
    		1 5/8"1 7/16"1 1/4"2 5/8"5/8"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T4400000
    1 1/16"273/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T2400000
    1 1/8"293/4
    		1 5/8"1 9/16"1 1/4"2 3/4"11/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T4500000
    1 1/4"321
    		1 5/8"1 11/16"1 1/4"2 7/8"3/4"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T4600000
    1 5/16"331
    		1 5/8"1 3/4"1 1/4"3 1/16"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T8300000
    1 3/8"351
    		1 5/8"1 13/16"1 1/4"3"13/16"5/64"1,000-50 to 275UL 2043
    		Thumb Grip32625T4700000
    1 1/2"38—1 5/8"1 15/16"1 1/4"3 3/16"7/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T4800000
    1 5/8"411 1/4
    		1 5/8"2 1/16"1 1/4"3 7/16"15/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1100000
    1 11/16"431 1/4
    		1 5/8"2 3/16"1 1/4"3 7/16"1"7/64"Not Rated-50 to 270——32625T2500000
    1 3/4"441 1/4
    		1 5/8"2 3/16"1 1/4"3 9/16"1"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1200000
    1 7/8"481 1/2
    		1 5/8"2 5/16"1 1/4"3 3/4"1 1/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1300000
    2"511 1/2
    		1 5/8"2 7/16"1 1/4"3 13/16"1 1/8"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1400000
    2 1/8"54—1 5/8"2 9/16"1 1/4"4"1 1/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1500000
    2 1/4"57—1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T4300000
    2 3/8"602
    		1 5/8"2 13/16"1 1/4"4 3/8"1 7/16"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T6500000
    2 1/2"642
    		1 5/8"2 15/16"1 1/4"4 1/2"1 7/16"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T1600000
    2 5/8"67—1 5/8"3 1/16"1 1/4"4 5/8"1 1/2"1/8"2,200-50 to 275UL 2043
    		Thumb Grip32625T8800000
    2 7/8"732 1/2
    		1 5/8"3 5/16"1 1/4"4 7/8"1 11/16"1/8"Not Rated-50 to 275UL 2043
    		Thumb Grip32625T2800000
    3"762 1/2
    		1 5/8"3 9/16"1 1/4"5"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T8400000
    3 1/8"79—1 5/8"3 9/16"1 1/4"5 1/8"1 3/4"7/64"2,200-50 to 275UL 2043
    		Thumb Grip32625T8500000
    3 1/2"893
    		1 5/8"3 15/16"1 1/4"5 9/16"2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T8700000
    4"1023 1/2
    		1 5/8"4 7/16"1 1/4"6 3/16"2 1/4"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T9200000
    4 1/8"1053 1/2
    		1 5/8"4 9/16"1 1/4"6 1/4"2 5/16"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T6700000
    4 1/2"1144
    		1 5/8"4 15/16"1 1/4"6 7/8"2 1/2"1/8"3,600-50 to 275UL 2043
    		Thumb Grip32625T16400000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T7700000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T78000000
     
    316 Stainless Steel with TPE Cushion
    1/4"6—1 5/8"5/8"1 1/4"1 3/4"1/4"5/64"Not Rated-50 to 270UL 2043
    		—32625T890000
    3/8"10—1 5/8"3/4"1 1/4"1 7/8"5/16"5/64"Not Rated-50 to 270UL 2043
    		—32625T930000
    1/2"131/8
    		1 5/8"7/8"1 1/4"2"3/8"5/64"Not Rated-50 to 270UL 2043
    		—32625T940000
    9/16"141/4
    		1 5/8"15/16"1 1/4"2"3/8"5/64"Not Rated-50 to 270UL 2043
    		—32625T1260000
    5/8"161/4
    		1 5/8"1"1 1/4"2 1/8"7/16"5/64"Not Rated-50 to 270UL 2043
    		—32625T950000
    11/16"173/8
    		1 5/8"1 1/16"1 1/4"2 3/16"7/16"5/64"Not Rated-50 to 270UL 2043
    		—32625T1270000
    3/4"193/8
    		1 5/8"1 5/16"1 1/4"2 7/16"9/16"5/64"Not Rated-50 to 270UL 2043
    		—32625T960000
    13/16"211/2
    		1 5/8"1 7/16"1 1/4"2 1/2"5/8"5/64"Not Rated-50 to 270UL 2043
    		—32625T12800000
    7/8"221/2
    		1 5/8"1 7/16"1 1/4"2 1/2"9/16"5/64"Not Rated-50 to 270UL 2043
    		—32625T9700000
    1"253/4
    		1 5/8"1 11/16"1 1/4"2 11/16"11/16"7/64"Not Rated-50 to 270UL 2043
    		—32625T9800000
    1 1/16"273/4
    		1 5/8"1 13/16"1 1/4"2 13/16"3/4"7/64"Not Rated-50 to 270UL 2043
    		—32625T12900000
    1 1/8"293/4
    		1 5/8"1 13/16"1 1/4"2 13/16"3/4"7/64"Not Rated-50 to 270UL 2043
    		—32625T9900000
    1 1/4"321
    		1 5/8"1 15/16"1 1/4"2 15/16"13/16"7/64"Not Rated-50 to 270UL 2043
    		—32625T18200000
    1 5/16"331
    		1 5/8"2 1/4"1 1/4"3 3/8"7/8"1/8"Not Rated-50 to 270UL 2043
    		—32625T13100000
    1 3/8"351
    		1 5/8"2 1/4"1 1/4"3 1/4"13/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T18300000
    1 1/2"38—1 5/8"2 1/4"1 1/4"3 5/16"15/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11100000
    1 5/8"411 1/4
    		1 5/8"2 1/2"1 1/4"3 5/16"1"1/8"Not Rated-50 to 270UL 2043
    		—32625T11200000
    1 11/16"431 1/4
    		1 5/8"2 1/2"1 1/4"3 11/16"1 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13200000
    1 3/4"441 1/4
    		1 5/8"2 1/2"1 1/4"3 11/16"1 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11300000
    1 7/8"481 1/2
    		1 5/8"2 1/2"1 1/4"3 7/8"1 3/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13300000
    2"511 1/2
    		1 5/8"2 3/4"1 1/4"3 7/8"1 3/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11500000
    2 1/8"54—1 5/8"3"1 1/4"4 1/4"1 5/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11600000
    2 1/4"57—1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11700000
    2 3/8"602
    		1 5/8"3 1/4"1 1/4"4 7/16"1 7/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13400000
    2 1/2"642
    		1 5/8"3 1/2"1 1/4"4 5/8"1 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T11900000
    2 5/8"67—1 5/8"3 1/2"1 1/4"4 5/8"1 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T12100000
    2 7/8"732 1/2
    		1 5/8"3 3/4"1 1/4"4 15/16"1 11/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13500000
    3"762 1/2
    		1 5/8"4"1 1/4"5 1/8"1 13/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T12200000
    3 1/8"79—1 5/8"4"1 1/4"5 1/8"1 13/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T12300000
    3 1/2"893
    		1 5/8"4 3/8"1 1/4"5 9/16"2"1/8"Not Rated-50 to 270UL 2043
    		—32625T13600000
    3 5/8"923
    		1 5/8"4 1/2"1 1/4"5 5/8"2 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T12400000
    4"1023 1/2
    		1 5/8"5"1 1/4"6 3/16"2 5/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13700000
    4 1/8"1053 1/2
    		1 5/8"5 1/16"1 1/4"6 1/4"2 3/8"1/8"Not Rated-50 to 270UL 2043
    		—32625T12500000
    4 3/8"1114
    		1 5/8"5 1/2"1 1/4"6 11/16"2 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T18400000
    5 9/16"1415
    		1 5/8"6 1/2"1 1/4"7 11/16"3 1/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T13800000
    6 5/8"1686
    		1 5/8"7 1/2"1 1/4"8 11/16"3 9/16"1/8"Not Rated-50 to 270UL 2043
    		—32625T139000000
     

    Standoff Strut Channel Routing Clamps

    Image of ProductInUse. Parallel-Mounted Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Parallel Mount.
    Image of ProductInUse. Perpendicular-Mounted Clamp Shown Installed. Front orientation. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Perpendicular Mount.
    Image of Product. Parallel Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Parallel Mount.
    Image of Product. Perpendicular Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Standoff Strut Channel Routing Clamps, Zinc-Plated Steel, Perpendicular Mount.

    Parallel-Mounted

    Clamp Shown

    Installed

    Perpendicular-Mounted

    Clamp Shown Installed

    Parallel Mount

    Perpendicular Mount

    Hold pipe and conduit away from strut channel so components don’t rub and wear. The extra clearance also permits airflow, which prevents condensation build-up and heat transfer from hot pipes to your channel. Slide clamps into the end of channel and tighten the screw.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Each
    Zinc-Plated Steel
     
    Parallel Mount
    11/16"173/8
    		1 5/8"1 1/4"13/16"3 3/16"2 1/16"1/16"Not Rated3193T1100000
    13/16"211/2
    		1 5/8"1 1/4"15/16"3 3/8"2 3/16"1/16"Not Rated3193T120000
    1 1/16"273/4
    		1 5/8"1 1/4"1 3/16"3 5/8"2 5/16"5/64"Not Rated3193T130000
    1 5/16"331
    		1 5/8"1 1/4"1 7/16"4"2 1/4"5/64"Not Rated3193T140000
    1 11/16"431 1/4
    		1 5/8"1 1/4"1 13/16"4 3/8"2 1/2"5/64"Not Rated3193T150000
    1 7/8"481 1/2
    		1 5/8"1 1/4"2 1/8"4 3/4"2 5/8"7/64"Not Rated3193T160000
    2 3/8"602
    		1 5/8"1 1/4"2 9/16"5 3/8"3 1/8"7/64"Not Rated3193T1700000
    3 1/2"893
    		1 5/8"1 1/4"3 11/16"6 3/8"3 3/8"7/64"Not Rated3193T1900000
    4 1/2"1144
    		1 5/8"1 1/4"4 3/4"7 3/8"3 13/16"1/8"Not Rated3193T2200000
     
    Perpendicular Mount
    11/16"173/8
    		1 5/8"2 3/8"1 1/4"2 13/16"1 3/16"5/64"253571T1100000
    13/16"211/2
    		1 5/8"2 7/16"1 1/4"3"1 1/4"5/64"353571T120000
    1 1/16"273/4
    		1 5/8"2 1/2"1 1/4"3 3/16"1 5/16"5/64"403571T130000
    1 5/16"341
    		1 5/8"2 5/8"1 1/4"3 7/16"1 1/2"5/64"503571T1400000
    1 11/16"421 1/4
    		1 5/8"2 13/16"1 1/4"3 13/16"1 11/16"7/64"703571T1500000
    1 7/8"481 1/2
    		1 5/8"2 7/8"1 1/4"4"1 3/4"1/8"803571T1800000
    2 3/8"612
    		1 5/8"3 1/16"1 1/4"4 9/16"2"9/64"1203571T1700000
     

    Strut Channel Routing Clamps for Insulated Pipe

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Strut Channel Routing Clamps for Insulated Pipe.
    Mount pipe to strut channel without crushing the insulation or exposing the pipe. A polyolefin plastic insert seals around the insulation to prevent sweating that can cause mold and corrosion. To install these clamps, slide into the strut channel, insert the insulated pipe, and tighten the screw to secure. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Flammability Rating—UL 2043 certified to generate minimal smoke in the event of a fire. These are a good choice for spaces that could spread smoke through your HVAC system, such as air intakes and ducts.
    ID
    Inch
    Metric,
    mm
    For Insulation
    Thk.
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Flammability
    Rating
    Each
    Zinc-Plated Steel with Polyolefin Insert
    1/4"61/2"—1 5/8"1 3/8"2"2 13/16"11/16"5/64"230-60 to 225UL 2043
    		3115T31100000
    1/4"63/4"—1 5/8"1 7/8"2"3 11/16"15/16"1/8"230-60 to 225UL 2043
    		3115T3270000
    1/4"61"—1 5/8"2 3/8"2"4 3/16"1 3/16"1/8"230-60 to 225UL 2043
    		3115T44300000
    5/16"81"—1 5/8"2 7/16"2"4 3/16"1 3/16"1/8"230-60 to 225UL 2043
    		3115T44400000
    3/8"101/2"—1 5/8"1 1/2"2"2 15/16"3/4"5/64"230-60 to 225UL 2043
    		3115T3120000
    3/8"103/4"—1 5/8"2"2"3 11/16"1"1/8"230-60 to 225UL 2043
    		3115T3280000
    3/8"101"—1 5/8"2 1/2"2"4 3/16"1 1/4"1/8"230-60 to 225UL 2043
    		3115T44500000
    1/2"131/2"1/8
    		1 5/8"1 5/8"2"3 3/8"3/4"5/64"230-60 to 225UL 2043
    		3115T3130000
    1/2"133/4"1/8
    		1 5/8"2 1/16"2"3 13/16"1"1/8"230-60 to 225UL 2043
    		3115T3290000
    1/2"131"1/8
    		1 5/8"2 5/8"2"4 5/16"1 1/4"1/8"230-60 to 225UL 2043
    		3115T44600000
    5/8"161/2"1/4
    		1 5/8"1 3/4"2"3 3/8"13/16"5/64"230-60 to 225UL 2043
    		3115T3140000
    5/8"161/2"1/4
    		1 5/8"1 13/16"2"3 3/8"13/16"1/8"230-60 to 225UL 2043
    		3115T3850000
    5/8"163/4"1/4
    		1 5/8"2 1/4"2"3 15/16"1 1/16"1/8"230-60 to 225UL 2043
    		3115T4310000
    5/8"161"1/4
    		1 5/8"2 3/4"2"4 7/16"1 5/16"1/8"230-60 to 225UL 2043
    		3115T44700000
    5/8"161"1/4
    		1 5/8"3"2"4 11/16"1 7/16"1/8"230-60 to 225UL 2043
    		3115T39200000
    5/8"162"1/4
    		1 5/8"4 5/8"2"6 5/16"2 1/4"1/8"Not Rated-60 to 225UL 2043
    		3115T37900000
    3/4"191/2"3/8
    		1 5/8"1 7/8"2"3 11/16"7/8"5/64"230-60 to 225UL 2043
    		3115T3150000
    3/4"193/4"3/8
    		1 5/8"2 3/8"2"4 1/16"1 1/8"1/8"230-60 to 225UL 2043
    		3115T4320000
    3/4"191"3/8
    		1 5/8"2 7/8"2"4 9/16"1 3/8"1/8"230-60 to 225UL 2043
    		3115T44800000
    7/8"221/2"1/2
    		1 5/8"2"2"3 11/16"15/16"5/64"230-60 to 225UL 2043
    		3115T3160000
    7/8"221/2"1/2
    		1 5/8"2"2"3 11/16"15/16"1/8"230-60 to 225UL 2043
    		3115T3860000
    7/8"223/4"1/2
    		1 5/8"2 1/2"2"4 3/16"1 3/16"1/8"245-60 to 225UL 2043
    		3115T43300000
    7/8"221"1/2
    		1 5/8"3"2"4 11/16"1 7/16"1/8"265-60 to 225UL 2043
    		3115T39300000
    7/8"222"1/2
    		1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"Not Rated-60 to 225UL 2043
    		3115T38100000
    1"251/2"3/4
    		1 5/8"2 1/8"2"3 13/16"1"5/64"360-60 to 225UL 2043
    		3115T3170000
    1"251"3/4
    		1 5/8"3"2"4 11/16"1 5/16"1/8"265-60 to 225UL 2043
    		3115T41100000
    1 1/8"291/2"3/4
    		1 5/8"2 1/4"2"3 15/16"1 1/16"7/64"490-60 to 225UL 2043
    		3115T3180000
    1 1/8"291/2"3/4
    		1 5/8"2 5/16"2"3 15/16"1 1/16"1/8"490-60 to 225UL 2043
    		3115T3870000
    1 1/8"293/4"3/4
    		1 5/8"2 3/4"2"4 7/16"1 1/4"1/8"430-60 to 225UL 2043
    		3115T43400000
    1 1/8"291"3/4
    		1 5/8"3"2"4 11/16"1 7/16"1/8"370-60 to 225UL 2043
    		3115T39400000
    1 1/8"291"3/4
    		1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"370-60 to 225UL 2043
    		3115T37100000
    1 1/8"292"3/4
    		1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"Not Rated-60 to 225UL 2043
    		3115T38200000
    1 1/4"321"1
    		1 5/8"3 5/8"2"5 1/4"1 11/16"1/8"425-60 to 225UL 2043
    		3115T41200000
    1 3/8"351/2"1
    		1 5/8"2 1/2"2"4 1/16"1 1/8"1/8"625-60 to 225UL 2043
    		3115T31900000
    1 3/8"351/2"1
    		1 5/8"2 1/2"2"4 3/16"1 3/16"1/8"625-60 to 225UL 2043
    		3115T38800000
    1 3/8"353/4"1
    		1 5/8"3"2"4 11/16"1 1/2"1/8"525-60 to 225UL 2043
    		3115T43500000
    1 3/8"351"1
    		1 5/8"3 1/2"2"5 1/8"1 3/4"1/8"425-60 to 225UL 2043
    		3115T37200000
    1 3/8"351"1
    		1 5/8"3 5/8"2"5 1/4"1 3/4"1/8"425-60 to 225UL 2043
    		3115T39500000
    1 3/8"352"1
    		1 5/8"5 11/16"2"7 7/8"2 3/4"1/8"Not Rated-60 to 225UL 2043
    		3115T38300000
    1 9/16"401"—1 5/8"3 5/8"2"5 1/4"1 11/16"1/8"555-60 to 225UL 2043
    		3115T41300000
    1 5/8"411/2"1 1/4
    		1 5/8"2 3/4"2"4 7/16"1 5/16"1/8"675-60 to 225UL 2043
    		3115T42100000
    1 5/8"411/2"1 1/4
    		1 5/8"2 7/8"2"4 9/16"1 3/8"1/8"675-60 to 225UL 2043
    		3115T38900000
    1 5/8"413/4"1 1/4
    		1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"600-60 to 225UL 2043
    		3115T43600000
    1 5/8"411"1 1/4
    		1 5/8"3 5/8"2"5 1/4"1 3/4"1/8"555-60 to 225UL 2043
    		3115T39600000
    1 5/8"411"1 1/4
    		1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"555-60 to 225UL 2043
    		3115T37300000
    1 5/8"412"1 1/4
    		1 5/8"5 11/16"2"7 7/8"2 3/4"1/8"Not Rated-60 to 225UL 2043
    		3115T38400000
    1 15/16"491"1 1/2
    		1 5/8"4 1/8"2"5 11/16"1 7/8"1/8"690-60 to 225UL 2043
    		3115T41400000
    2 1/8"541/2"—1 5/8"3 1/4"2"5 1/16"1 9/16"1/8"730-60 to 225UL 2043
    		3115T42200000
    2 1/8"541/2"—1 5/8"3 5/16"2"5 1/16"1 9/16"1/8"730-60 to 225UL 2043
    		3115T39100000
    2 1/8"543/4"—1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"675-60 to 225UL 2043
    		3115T43700000
    2 1/8"541"—1 5/8"4 1/8"2"5 11/16"2"1/8"690-60 to 225UL 2043
    		3115T39700000
    2 1/8"541"—1 5/8"4 1/4"2"6"2 1/16"1/8"690-60 to 225UL 2043
    		3115T37400000
    2 1/2"641"2
    		1 5/8"4 5/8"2"6 5/16"2 3/16"1/8"690-60 to 225UL 2043
    		3115T41500000
    2 5/8"671/2"—1 5/8"3 3/4"2"5 7/16"1 13/16"1/8"785-60 to 225UL 2043
    		3115T32300000
    2 5/8"673/4"—1 5/8"4 1/4"2"6"2 1/16"1/8"750-60 to 225UL 2043
    		3115T43800000
    2 5/8"671"—1 5/8"4 5/8"2"6 5/16"2 1/4"1/8"820-60 to 225UL 2043
    		3115T39800000
    2 5/8"671"—1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"820-60 to 225UL 2043
    		3115T37500000
    2 15/16"751"2 1/2
    		1 5/8"5 1/8"2"7 3/8"2 7/16"1/8"825-60 to 225UL 2043
    		3115T41600000
    3 1/8"791/2"—1 5/8"4 1/4"2"6"2 1/16"1/8"840-60 to 225UL 2043
    		3115T32400000
    3 1/8"793/4"—1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"825-60 to 225UL 2043
    		3115T43900000
    3 1/8"791"—1 5/8"5 1/8"2"7 3/8"2 1/2"1/8"950-60 to 225UL 2043
    		3115T39900000
    3 1/8"791"—1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"950-60 to 225UL 2043
    		3115T37600000
    3 9/16"901"3
    		1 5/8"5 3/4"2"7 7/8"2 11/16"1/8"950-60 to 225UL 2043
    		3115T41700000
    3 5/8"921/2"3
    		1 5/8"4 3/4"2"6 13/16"2 5/16"1/8"840-60 to 225UL 2043
    		3115T32500000
    3 5/8"923/4"3
    		1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"825-60 to 225UL 2043
    		3115T44100000
    3 5/8"921"3
    		1 5/8"5 3/4"2"7 7/8"2 13/16"1/8"950-60 to 225UL 2043
    		3115T37700000
    4 1/8"1051/2"3 1/2
    		1 5/8"5 1/4"2"7 3/8"2 9/16"1/8"895-60 to 225UL 2043
    		3115T32600000
    4 1/8"1053/4"3 1/2
    		1 5/8"5 3/4"2"7 7/8"2 13/16"1/8"900-60 to 225UL 2043
    		3115T44200000
    4 1/8"1051"3 1/2
    		1 5/8"6 1/4"2"8 3/8"3 1/16"1/8"1,085-60 to 225UL 2043
    		3115T37800000
     

    Adjustable Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, Border, MultipleImages. Strut Channel Framing and Fittings. Adjustable Strut Channel Routing Clamps.
    Secure a range of pipe sizes with a single clamp. The vertical adjustment bolt is easy to access and turn. Slide clamps into the end of channel and tighten around pipe. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Specs. Met
    Each
     
    Zinc-Plated Steel
    3/8" to 11/16"10 to 171/8, 3/8
    		1 5/8"1"3/4"1 3/4"1/16"200C-UL Listed, UL Listed3979T700000
    5/8" to 7/8"16 to 223/8, 1/2
    		1 5/8"1 1/4"3/4"2"1/16"200C-UL Listed, UL Listed3979T80000
    3/4" to 1 1/8"19 to 293/8, 3/4
    		1 5/8"1 1/2"3/4"2 1/4"1/16"200C-UL Listed, UL Listed3979T90000
    1" to 1 1/2"25 to 383/4, 1
    		1 5/8"1 3/4"3/4"2 1/2"1/16"200C-UL Listed, UL Listed3979T110000
    1 1/4" to 1 11/16"32 to 431, 1 1/4
    		1 5/8"2 1/4"3/4"2 3/4"7/64"350C-UL Listed, UL Listed3979T120000
    1 3/4" to 2 3/16"44 to 561 1/2
    		1 5/8"2 3/4"3/4"3 1/4"7/64"350C-UL Listed, UL Listed3979T130000
     

    Low-Profile Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Low-Profile Strut Channel Routing Clamps.
    Save space in tight-clearance installations with clamps that don’t stick out above pipe, conduit, and tubing. Slide a bolt through the mounting hole and into a strut channel nut to secure.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Thk.
    Ctr.-to-Ctr.
    Wt. Cap.
    Mounting
    Hole Dia.
    Each
     
    Zinc-Plated Steel
    1/4"6—1 5/8"1 3/16"1 5/8"1/16"9/16"Not Rated1/4"3545T1100000
    5/16"8—1 5/8"1 1/4"1 5/8"1/16"9/16"Not Rated1/4"3545T120000
    3/8"10—1 5/8"1 5/16"1 5/8"1/16"5/8"Not Rated1/4"3545T130000
    1/2"131/8
    		1 5/8"1 7/16"1 5/8"1/16"5/8"Not Rated1/4"3545T140000
    5/8"161/4
    		1 5/8"1 5/8"1 5/8"5/64"3/4"Not Rated1/4"3545T150000
    3/4"193/8
    		1 5/8"1 11/16"1 5/8"5/64"13/16"Not Rated1/4"3545T160000
    7/8"221/2
    		1 5/8"1 13/16"1 5/8"5/64"7/8"Not Rated1/4"3545T170000
    1"253/4
    		1 5/8"1 15/16"1 5/8"5/64"7/8"Not Rated1/4"3545T180000
     

    Strut Channel Spool Rack Mounts

    Image of ProductInUse. Left-Side Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Left-Side Mount.
    Image of ProductInUse. Right-Side Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Right-Side Mount.
    Image of ProductInUse. Center Mount Shown Installed. Front orientation. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Center Mount.
    Image of Product. Left-Side Mount. Back orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Left-Side Mount.
    Image of Product. Right-Side Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Right-Side Mount.
    Image of Product. Center Mount. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Strut Channel Spool Rack Mounts, Zinc-Plated Steel, Center Mount.

    Left-Side

    Mount

    Shown

    Installed

    Right-Side

    Mount

    Shown

    Installed

    Center

    Mount

    Shown

    Installed

    Left-Side Mount

    Right-Side Mount

    Center Mount

    Hang rods and pipe between strut channel to create your own spool racks for dispensing wire, hose, and tubing.
    Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.
    Hole
    For Channel
    Wd.
    For No.
    of Rails
    For Pipe
    Size
    For Max.
    Rail OD
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Thk.
    Projection
    No.
    of
    Dia.
    Fasteners
    Included
    Each
    Zinc-Plated Steel
     
    Left-Side Mount
    1 5/8"11 1/4
    		1 5/8"2,0005 3/8"1 5/8"1/4"3"29/16"No6217N11000000
     
    Right-Side Mount
    1 5/8"11 1/4
    		1 5/8"2,0005 3/8"1 5/8"1/4"3"29/16"No6217N1200000
     
    Center Mount
    1 5/8"21 1/4
    		1 5/8"4,0007 5/8"3"1/4"3"39/16"No6217N13000000
     

    Quick-Connect Strut Channel

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Strut Channel.
    Cut the time and cost of installing conduit and pipe. This strut channel has a slotted grid for snapping in routing clamps—no tools or fasteners needed. It also has a standard 15/8” channel opening, so you can hang it with compatible components.
    Channel
    Image of Product. Channel. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Channel, Slotted Grid.
    Image of Attribute. Front orientation. Contains Annotated. Standard, Channel.

    Channel

    Galvanized Steel—An economical alternative to stainless steel channel, this channel withstands wet and outdoor environments. However, it won't hold up to salt water or chemicals.
    Narrow
    Slots
    Standard
    Slots
    Channel
    Material
    Slot
    Lg.
    Slot
    Wd.
    Slot
    Lg.
    Slot
    Wd.
    Ht.
    Wd.
    Inside Channel
    Wd.
    Thk.
    14"
    Long
    4 1/2 ft.
    Long
    5 1/2 ft.
    Long
    8 1/2 ft.
    Long
    Slotted Grid
    Galvanized Steel1/8"13/16"1 1/8"9/16"1 5/8"1 5/8"7/8"0.11"3961N12
    00000
    000000
    000000
    000000
     
    Routing Clamp Mounts
    Image of Product. Routing Clamp Mount. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Zinc-Plated Steel.

    Routing Clamp Mount

    Routing Clamp Mounts—Snap into the open side of your quick-connect strut channel and add routing clamps to run conduit and pipe on both sides.
    Lg.
    Wd.
    Ht.
    Each
    Zinc-Plated Steel
    1 7/8"13/16"1 1/2"4067N3100000
     
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, 1/8" Long Slot × 13/16" Wide Slot.

    Channel Adapter

    Channel Adapters—Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Lg.
    Ht.
    Thk.
    Hole
    Dia.
    Fasteners
    Included
    Each
    1/8" Long Slot × 13/16" Wide Slot
     
    Galvanized Steel
    14"5/16"0.11"7/16"No3858N1100000
    24"5/16"0.11"7/16"No3858N1200000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"4067N2400000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"4067N170000013/16"4067N1100000
    3/4
    		1 5/8"1 1/2"40015/16"4067N250000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"4067N1800001 1/16"4067N120000
    1
    		1 7/8"1 1/2"4001 3/16"4067N260000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"4067N1900001 5/16"4067N130000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"4067N270000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"4067N140000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"4067N150000
    2
    		2 15/16"1 1/2"4002 3/16"4067N290000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"4067N160000
     

    Quick-Connect Low-Profile Strut Channel

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel.
    It’s a snap to install conduit and pipe in tight spots. Half the height of other quick-connect channel, it fits beneath flooring and along obstructed ceilings and walls. Channel has a row of slotted grid for routing clamps—just push them into place. It also has a standard 15/8” channel opening, so you can hang it with compatible components.
    Channel
    Image of Product. Channel. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Channel, Slotted Grid.
    Image of Attribute. Front orientation. Contains Annotated. Low Profile, Channel.

    Channel

    Galvanized Steel—An economical alternative to stainless steel channel, this channel withstands wet and outdoor environments. However, it won't hold up to salt water or chemicals.
    Narrow
    Slots
    Standard
    Slots
    Channel
    Material
    Slot
    Lg.
    Slot
    Wd.
    Slot
    Lg.
    Slot
    Wd.
    Ht.
    Wd.
    Inside Channel
    Wd.
    Thk.
    14"
    Long
    1 1/2 ft.
    Long
    6 1/2 ft.
    Long
    Slotted Grid
    Galvanized Steel1/8"13/16"1 1/8"9/16"13/16"1 5/8"7/8"0.11"3961N11
    00000
    00000
    000000
     
    Routing Clamp Mounts
    Image of Product. Routing Clamp Mount. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Zinc-Plated Steel.

    Routing Clamp Mount

    Routing Clamp Mounts—Snap into the open side of your quick-connect strut channel and add routing clamps to run conduit and pipe on both sides.
    Lg.
    Wd.
    Ht.
    Each
    Zinc-Plated Steel
    1 7/8"13/16"1 1/2"4067N3100000
     
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, 1/8" Long Slot × 13/16" Wide Slot.

    Channel Adapter

    Channel Adapters—Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Lg.
    Ht.
    Thk.
    Hole
    Dia.
    Fasteners
    Included
    Each
    1/8" Long Slot × 13/16" Wide Slot
     
    Galvanized Steel
    14"5/16"0.11"7/16"No3858N1100000
    24"5/16"0.11"7/16"No3858N1200000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Low-Profile Strut Channel, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"4067N2400000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"4067N170000013/16"4067N1100000
    3/4
    		1 5/8"1 1/2"40015/16"4067N250000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"4067N1800001 1/16"4067N120000
    1
    		1 7/8"1 1/2"4001 3/16"4067N260000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"4067N1900001 5/16"4067N130000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"4067N270000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"4067N140000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"4067N150000
    2
    		2 15/16"1 1/2"4002 3/16"4067N290000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"4067N160000
     

    Quick-Connect Strut Channel Adapters

    Image of Product. Front orientation. Contains Annotated. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters.
    Double the mounting space on your strut channel. Attach these adapters to 15/8" wide channel to add a quick-connect slotted grid. Once installed, you can mount conduit and pipe on both sides.
    Channel Adapters
    Image of Product. Channel Adapter. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters, Channel Adapters, For 1 5/8" Channel Width.
    Image of Attribute. Front orientation. Contains Annotated. Channel Adapters.

    Channel Adapter

    Galvanized Steel—An economical alternative to stainless steel, these withstand wet and outdoor environments. However, they won't hold up to salt water and chemicals.
    Slot
    Lg.
    Ht.
    Thk.
    Lg.
    Wd.
    Hole
    Dia.
    Fasteners
    Included
    Each
    For 1 5/8" Channel Width
     
    Galvanized Steel
    14"5/16"0.11"1/8"13/16"7/16"No3858N1100000
    24"5/16"0.11"1/8"13/16"7/16"No3858N1200000
     
    Routing Clamps
    Image of Product. Routing Clamp. Front orientation. Strut Channel Framing and Fittings. Quick-Connect Strut Channel Adapters, Snap In.

    Routing Clamp

    Routing Clamps—Attach these clamps to quick-connect channel to route pipe, conduit, and tubing around your facility. Clamps can be removed and reinserted, so they’re easy to reposition and reuse.
    For EMT Conduit
    For RMC Conduit
    For Pipe
    For Pipe
    Size
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    ID
    Each
    ID
    Each
    ID
    Each
    Snap In
     
    Zinc-Plated Steel
    1/2
    		1 7/16"1 1/2"40011/16"4067N2400000————0————0
    1/2
    		1 9/16"1 1/2"400————013/16"4067N170000013/16"4067N1100000
    3/4
    		1 5/8"1 1/2"40015/16"4067N250000————0————0
    3/4
    		1 13/16"1 1/2"400————01 1/16"4067N1800001 1/16"4067N120000
    1
    		1 7/8"1 1/2"4001 3/16"4067N260000————0————0
    1
    		2 1/16"1 1/2"400————01 5/16"4067N1900001 5/16"4067N130000
    1 1/4
    		2 1/4"1 1/2"4001 1/2"4067N270000————0————0
    1 1/4
    		2 3/8"1 1/2"400————0————01 11/16"4067N140000
    1 1/2
    		2 5/8"1 1/2"400————0————01 7/8"4067N150000
    2
    		2 15/16"1 1/2"4002 3/16"4067N290000————0————0
    2
    		3 1/8"1 1/2"400————0————02 3/8"4067N160000
     

    Snap-In Vibration-Damping Strut Channel Routing Clamps

    Image of Product. Front orientation. Contains Annotated, Inset, MultipleImages. Strut Channel Framing and Fittings. Snap-In Vibration-Damping Strut Channel Routing Clamps.
    Install these clamps once, then snap pipes in and out without having to loosen any fasteners. Clamps are made of flexible TPE rubber that absorbs vibration to extend the life of your pipe, tube, and conduit. More economical than our other routing clamps, use them for drain lines or light duty runs of pipe and tubing for air.
    ID
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Channel
    Wd.
    Lg.
    Wd.
    Ht.
    Ctr.
    Ht.
    Thk.
    Wt. Cap.,
    lb.
    Temp.,
    ° F
    Each
    TPE Rubber
    1/4"6—1 5/8"1 5/16"1 3/8"1 5/16"3/16"5/64"75-50 to 27532625T18600000
    3/8"10—1 5/8"1 5/16"1 3/8"1 1/2"5/16"5/64"75-50 to 27532625T1870000
    1/2"131/8
    		1 5/8"1 1/2"1 3/8"1 13/16"7/16"3/32"75-50 to 27532625T1880000
    5/8"161/4
    		1 5/8"1 1/2"1 3/8"2"1/2"7/64"75-50 to 27532625T1890000
    3/4"183/8
    		1 5/8"1 1/2"1 3/8"2 1/8"1/2"1/8"75-50 to 27532625T1940000
    3/4"193/8
    		1 5/8"1 1/2"1 3/8"2 1/8"9/16"9/64"75-50 to 27532625T1910000
    7/8"221/2
    		1 5/8"1 5/8"1 3/8"2 1/2"11/16"5/32"75-50 to 27532625T1920000
    15/16"233/4
    		1 5/8"1 5/8"1 3/8"2 1/2"11/16"5/32"75-50 to 27532625T1950000
    1 1/8"293/4
    		1 5/8"1 15/16"1 3/8"2 7/8"13/16"3/16"75-50 to 27532625T1930000
    1 3/16"301
    		1 5/8"1 15/16"1 3/8"3"13/16"3/16"75-50 to 27532625T1960000
     
    back to top