We will reply to your message within an hour.
Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.
Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.
Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.
View all sides of your installed components.
Control access to these enclosures with a key-operated lock.
Holes in the cover allow easy installation of push buttons, switches, and indicating lights.
Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.
Mounting feet make attachment to machines and walls hassle-free.
House electrical components in these general purpose enclosures.
Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.
These enclosures have internal slots to hold circuit boards in place.
With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.
These enclosures allow you to inspect your electronics without opening the cover.
Small and lightweight, these enclosures are used with sensors, switches, and testing devices.
These enclosures withstand temperatures up to 475° F.
Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.
Inspect components without opening the cover.
With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.
Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.
Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.
Check on the contents inside these enclosures from every angle without opening them in wet environments.
Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.
These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.
Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.
Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.
Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.
With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.
Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.
Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.
These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.
Bury these enclosures in the ground or in concrete. They withstand freeze/thaw conditions and have an open bottom for water drainage.
Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.
Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.
House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.
Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.
A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.
The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.
Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.
Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.
Protect monitors and televisions from environmental damage with these enclosures.
Use these open boxes with adhesive for electronics (also known as potting compound) to encase electronic assemblies and protect them from vibration, tampering, moisture, and corrosives.
For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.
Snap these enclosures onto 35 mm DIN rail and lock them in place.
These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.
These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.
Rated NEMA 12 for protection from dirt and oil/coolant dripping.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
These boxes come ready to use with receptacles and/or light switches installed.
Knockouts allow you to modify these boxes to fit your application.
Close off unused outlets.
Add depth to your outlet box.
Close off unused switches.
Add depth to your switch box.
Add depth to octagonal outlet boxes.
With built-in threaded connections, these boxes allow you to attach conduit without using fittings.
Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.
Use the built-in connections to attach conduit without using fittings.
Designed for commercial use, these heavy duty boxes have thick, rigid walls.
These boxes have an open back to accommodate extra-deep low-voltage devices.
Mount these boxes on the surface of your wall in areas where you can't create a recess.
These boxes come ready to use with receptacles installed.
Build your own outlet box or replace a damaged box.
Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.
These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.
Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.
Add depth to your weatherproof outlet box.
Rain, snow, and wet conditions won't damage these corrosion-resistant covers.
These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.
Give switches and outlets a finished look.
Close off unused switches and outlets.
Keep switches and outlets under cover for protection from dust and dirt. These stainless steel plates resist corrosion and have a sealing gasket to keep out moisture.
Snap end and center sections together to create your own two-device or wider wall plate.
Pair wall plates and adapters to create a custom cover for existing receptacles and switches to give them a rejuvenated look, no rewiring required.
Cover existing outlets and switches for a refreshed appearance, no rewiring necessary.
A large angled opening provides an exit point for cords that run behind walls.
Create various data connector configurations by choosing adapters to snap into the ports in these wall plates.
These kits come with everything you need to mount enclosures to round poles or beams. They clamp on to a range of pole diameters to hold enclosures securely in place.
Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.
House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.
These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.
Mount enclosures to the floor above hazards such as water.
Raise your enclosure to access switches, gauges, screens, and other parts at a comfortable working height.
Add a secondary panel that swings to mount more components in your enclosure.
With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.
Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.
This raceway system is also known as wireway and wire trough.
Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.
In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.
Route power, data, and control cable rated up to 600 volts AC/DC.
Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.
The triangular shape fits into corners.
Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.
With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.
Keep personnel safe from electric shock with ground fault protection.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
With a rubber housing, these outlet strips withstand drops and other impact.
Power computers, lab equipment, and office machines that have IEC connections.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.
Mount these strips into standard 19" wide electronics racks and enclosures.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
Install these extra-long strips onto the frame of an electrical cabinet.
Bring power to workstations that are not near a wall—these poles mount from the ceiling.
Connect multiple devices from a single outlet.
These curved outlet strips clamp onto a pole or table leg.
Snap these wall plates onto flush-mount outlet strips to secure the outlet strip in a cutout.
Power multiple devices with one extension cord.
Designed for indoor use, these cords are often used to power appliances.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Put overhead outlets in arm’s reach.
Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length.
In addition to an outlet on the end, these cords have multiple inline outlets.
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Designed for indoor applications, these cords are often used to power appliances.
Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.
Keep personnel safe from electric shock with these cords.
These self-coiling cords return to their retracted length after stretching for tangle-free storage.
A locking lever on the female socket prevents your device from disconnecting.
Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.
These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.
Attach these splitters to an extension cord to power multiple devices from one cord.
Plug these cords into a vehicle outlet to power a device from the vehicle's battery.
Plug these portable distribution boxes into a power source, such as a generator, to power equipment when electricity is not available. They're also known as spider boxes.
Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.
Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.
Inspect the terminal block and wiring without opening the cover.
For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.
Connect these boxes to a main box—they do not have a main circuit breaker switch. Use with Square D QO series circuit breakers.
These boxes have a main circuit breaker switch and main service knockouts in the corners. Use with Square D QO series circuit breakers.
Connect these boxes to a main box—they do not have a main circuit breaker switch. Use them with Homeline series circuit breakers.
With a main breaker installed and main service knockouts, these boxes are the entry point for electricity into your facility and the first step in protecting your electrical systems.
Conceal live electrical components in circuit breaker boxes to prevent injury and damage.
Holders have snap-on or screw-on covers to fully enclose and protect batteries.