Metering Faucets | McMaster-Carr

Filter by

Power Source

For Number of Sink Faucet Holes

Mounting Location

Inlet Location

Relative Water Temperature

Cold

Hot

Hot/Cold

Number of Inlets

Material

Brass

PVC

Stainless Steel

Manufacturer Model Number

Spout Height

Flow Rate

RoHS

Compliant with Exemptions

Spout Length

Inlet Connection Port

Pipe

Tube

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

Inlet Pipe Size

Performance

Inlet Thread Type

Fitting Connection

For Inlet Tube OD

Food Industry Standard

Inlet Gender

Manufacturer Series

Certification

Pipe Size

51 Products

Touch-Free Sink Faucets


Style A	Style B	Style C

Style D	Style E	Style F

Style G	Style H	Style J

Style K

Place your hands under these faucets to start the flow of water. Connect the single inlet to a pre-tempered water line, or attach to hot and cold water lines with a mixing valve (included with some faucets). To help you comply with ADA standards, these faucets run for at least 10 seconds. Install the spout and sensor no more than 48" off the ground to ensure these faucets are wheelchair accessible.

Battery Powered—Battery-powered faucets will run approximately three years on four AA batteries (included).

Electric—Electric faucets plug into a standard wall outlet. They have backup batteries in case the power goes out.

Solar Powered—Solar-powered faucets have a solar cell that charges when your room’s lights are on to save battery power. The solar cell generates enough power for the faucet to work even if the lights are only on sometimes.

Water Powered—Water-powered faucets charge every time they’re used, extending the life of the battery.

Styles D, F, and J—Styles D, F, and J faucets are easier to maintain and less prone to water damage because the most important components, such as the solenoid valve, sit above the sink.

Mixing Valve—Faucets with a mixing valve blend hot and cold water, so they set and maintain the temperature when you don’t have a pre-tempered water line. They meet ASSE 1070 standards to prevent scalding with water temperature-limiting devices. Use them in areas where frequent hand washing is required, such as industrial kitchens.

Side Handle—Those with a side handle give you an easy way to adjust the temperature.

Bluetooth—Faucets with Bluetooth let you check battery strength and set sensor distance from a free downloadable app on your smartphone. If your sink doesn’t get much use, you can also program the faucet to flush the line at scheduled times to prevent bacteria buildup.

	Sink Faucets													Replacement Valve Control Modules		Replacement Solenoid Valve Assemblies		Replacement Sensors
		Inlet				Spout
	Style	No. of	For Tube OD	Connection	Flow Rate, gpm	Lg.	Ht.	For No. of Sink Faucet Holes	Mounting Stud Ctr.-to-Ctr.	Includes	Features		Each		Each		Each		Each
Battery Powered







				Bottom Inlet—Chrome-Plated Brass (Sink Mount)

				A	1	3/8"	Compression	0.3	4 1/2"	—	1	—	Aerator, Trim Plate	Bluetooth	0000000	0000000	0000000	0000000	0000000	000000	00000000	000000


				A	1	3/8"	Compression	0.5	4 1/2"	—	1	—	Aerator, Trim Plate	Bluetooth	00000000	000000	0000000	000000	0000000	00000	00000000	00000
				B	1	3/8"	Compression	0.3	4 1/2"	—	3	4"	Aerator	Bluetooth	0000000	000000	0000000	000000	0000000	00000	00000000	00000
				B	1	3/8"	Compression	0.5	4 1/2"	—	3	4"	Aerator	Bluetooth	00000000	000000	0000000	000000	0000000	00000	00000000	00000
				C	1	3/8"	Compression	0.3	4 1/2"	—	1	—	Aerator, Trim Plate	—	0000000	000000	0000000	00000	———	0	0000000	000000
				C	1	3/8"	Compression	0.5	4 1/2"	—	1	—	Aerator, Trim Plate	—	0000000	000000	0000000	00000	———	0	0000000	000000
				D	1	3/8"	Compression	1.5	5 5/8"	10"	1	—	Aerator	—	0000000	000000	———	0	———	0	———	0
				E	1	3/8"	Compression	1.5	5 3/8"	10 1/4"	1	—	Aerator	—	0000000	000000	0000000	000000	0000000	000000	———	0




						Back Inlet—Chrome-Plated Brass (Wall Mount)

						K	1	3/8"	Compression	1.5	5 3/8"	10 1/4"	1	—	Aerator	—	0000000	000000	0000000	000000	0000000	000000	———	0


						Electric with Battery Backup







										Bottom Inlet—Chrome-Plated Brass (Sink Mount)

										C	1	3/8"	Compression	0.3	4 1/2"	—	1	—	Aerator, Trim Plate	—	0000000	000000	0000000	00000	———	0	0000000	000000


										C	1	3/8"	Compression	0.5	4 1/2"	—	1	—	Aerator, Trim Plate	—	0000000	000000	0000000	00000	———	0	0000000	000000
										E	1	3/8"	Compression	1.5	5 3/8"	10 1/4"	1	—	Aerator	—	0000000	000000	0000000	000000	0000000	000000	———	0
										G	1	3/8"	Compression	0.3	5 1/4"	—	1	—	Aerator, Trim Plate	Bluetooth	0000000	000000	0000000	000000	0000000	00000	00000000	00000
										G	1	3/8"	Compression	0.5	5 1/4"	—	1	—	Aerator, Trim Plate	Bluetooth	0000000	000000	0000000	000000	0000000	00000	———	0




												Back Inlet—Chrome-Plated Brass (Wall Mount)

												K	1	3/8"	Compression	1.5	5 3/8"	10 1/4"	1	—	Aerator	—	0000000	000000	0000000	000000	0000000	000000	———	0


												Water Powered with Battery Backup







																Bottom Inlet—Chrome-Plated Brass (Sink Mount)

H																1	3/8"	Compression	0.5	6 3/4"	—	1	—	—	Bluetooth	00000000	000000	000000	000000	———	0	———	0


H	2															3/8"	Compression	0.5	6 3/4"	—	1	—	Mixing Valve	Bluetooth	00000000	000000	000000	000000	———	0	———	0


Solar Powered with Battery Backup







																Bottom Inlet—Chrome-Plated Brass (Sink Mount)

																F	2	3/8"	Compression	0.5	4 1/4"	5 1/4"	1	—	Aerator, Mixing Valve, Side Handle	—	00000000	000000	———	0	0000000	000000	0000000	000000


																J	1	3/8"	Compression	0.5	4 1/4"	5 1/4"	1	—	Aerator	—	00000000	000000	———	0	0000000	000000	0000000	000000

Valve Control Modules for Sloan Touch-Free Sink Faucets

Faucet Control Module

Replace the valve control module in Sloan touch-free faucets.

For Mfr.	Mfr. Model No.	For Relative Water Temp.		Each
Sloan	EFP39A	Hot/Cold	0000000	0000000
Sloan	SFP40A	Hot/Cold	0000000	00000

Automatic Shutoff Sink Faucets


Style A	Style B	Style C	Style D	Style E

Prevent wasted water with these faucets that shut off when the handle is released.

Delayed Shut-Off—Delayed shut-off faucets dispense water for 10 to 30 seconds after pressing the push-top handle.

Style C—Style C has a mixing valve to dispense water at a consistent temperature.

	Sink Faucets													Replacement Hot Cartridges		Replacement Hot/Cold Cartridges
			Inlet
	Style	For Relative Water Temp.	No. of	Pipe Size	Thread Type	Gender	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.	Includes		Each		Each		Each
Sink Mount/Bottom Inlet—Immediate Shut-Off







				Chrome-Plated Brass

				A	Hot	1	1/2	NPS	Male	1.2	4 1/4"	1	—	1/4 NPT Male Adapter, Aerator	0000000	0000000	0000000	0000000	———	0


				A	Cold	1	1/2	NPS	Male	1.2	4 1/4"	1	—	1/4 NPT Male Adapter, Aerator	0000000	000000	———	0	0000000	0000000


				Sink Mount/Bottom Inlet—Delayed Shut-Off







								Chrome-Plated Brass

								B	Hot, Cold	1	1/2	NPSM	Male	1.2	4 1/4"	1	—	1/4 NPT Male Adapter, Aerator	0000000	000000	———	0	0000000	000000


								C	Hot/Cold	2	1/2	NPS	Male	1.2	4 1/4"	1	4"	Aerator	0000000	000000	———	0	0000000	000000
								D	Hot/Cold	2	1/2	NPS	Male	1.2	3 3/4"	2	4"	Aerator	0000000	000000	———	0	0000000	000000


								Wall Mount/Back Inlet—Immediate Shut-Off







												Chrome-Plated Brass

												E	Hot	1	1/2	NPT	Male	4.8	4"	1	—	—	000000	000000	0000000	000000	———	0


												E	Cold	1	1/2	NPT	Male	4.8	4"	1	—	—	000000	000000	———	0	0000000	000000

Solenoid Valve Assemblies for Sloan Touch-Free Sink Faucets

Solenoid Valve Assembly

Replace the solenoid valve in Sloan touch-free faucets.

For Mfr.	Mfr. Model No.	For Relative Water Temp.		Each
Sloan	EFP103	Hot/Cold	0000000	000000

Touch-Free Sink Faucets with Soap Dispenser

Hold your hands under these motion-sensing faucets to dispense both soap and water—soap is on the left, and water is on the right. They come with everything you need to hook them up: supply hose, liquid soap dispenser parts, and a power adapter that plugs into a standard wall outlet. For a consistent water temperature, you can connect these faucets to your pre-tempered water line.

To help you comply with ADA standards, these faucets run for at least 10 seconds. Install them so they're no more than 48" off the ground to make sure they’re wheelchair accessible.

Mixing Valve—Faucets with a mixing valve blend hot and cold water, so they set and maintain the temperature when you don’t have a pre-tempered water line.

Foam Soap Pump Kits—Foam soap pump kits (sold separately) let you swap liquid soap for foam soap.

	Sink Faucets												Foam Soap Pump Kits		Replacement Power Adapters
	Inlet
	No. of	For Tube OD	Connection	Flow Rate, gpm	Material	Spout Lg.	For No. of Sink Faucet Holes	Mounting Stud Ctr.-to-Ctr.	For Soap Form	Food Industry Std.		Each		Each		Each
Electric







				Bottom Inlet—Sink Mount with Aerator

				1	1/4"	Compression	0.5	Chrome-Plated Stainless Steel	4"	2	8"	Liquid	NSF/ANSI 372	0000000	000000000	0000000	0000000	0000000	000000




						Bottom Inlet—Sink Mount with Aerator and Mixing Valve

						1	1/4"	Compression	0.5	Chrome-Plated Stainless Steel	4"	2	8"	Liquid	NSF/ANSI 372	0000000	00000000	0000000	000000	0000000	00000

Single-Inlet Sink Faucets

Bottom Inlet—Sink Mount

Style F

Style F—Style F can also be used with deionized and demineralized water. Those with automatic shut-off prevent wasted water by stopping the flow of water when the handle is released.

Automatic Shutoff—Those with automatic shut-off prevent wasted water by stopping the flow of water when the handle is released.

				Inlet			Spout
	Style	For Relative Water Temp.	No. of Faucet Supply Lines	Pipe Size	Thread Type	Flow Rate, gpm	Lg.	Ht.	Outlet Connection	For No. of Sink Faucet Holes	Features		Each
Fixed Spout—PVC



		F	Hot, Cold	1	3/8	NPT	3.8	6 1/4"	14"	Barbed	1	Automatic Shutoff	0000000	0000000

Faucet Shut-Off Rods

For tap water with the tap of your hand, thread these stainless steel rods onto your faucet spout. Water flows when the rod is pushed and stops when it's released. These rods help comply with ADA when properly installed.

	Lg.	Thread Size	Gender	Includes		Each
Stainless Steel



	Standard	3 1/4"	55/64"-27	Female	15/16"-27 Male Adapter	000000	000000


	High Clearance	5"	55/64"-27	Female	15/16"-27 Male Adapter	000000	00000

Touch-Free Bottle Fillers


	Bottle Filler with Filter

Often installed in your countertop or sink, these high-clearance bottle fillers automatically start the flow of water when you set a container in front of them. These fillers meet NSF/ANSI 61 standards for drinking water. They have a coating on the spout that prevents buildup and contamination. Connect them to a water source and plug in the included AC transformer or use AA batteries for power. Use the switches on the valve control module to program run time and shut-off settings.

These fillers help you comply with ADA regulations when you install the sensor no higher than 48” from the floor. For accessibility if you have limited mobility or dexterity, the water flows for at least 10 seconds before turning off to give everyone enough time to fill their water bottle.

Bottle Fillers with Filter—Bottle fillers with a filter reduce lead, chlorine, and particulates. They also minimize taste and odors. Change the filter cartridge every 15,000 gallons.

	Bottle Fillers											Replacement Valve Control Modules		Replacement Filter Cartridges		Replacement Sensors
		Inlet				Electrical
	Ht.	Connection	For Tube OD	Material	Batteries Included	Connection	No. of Blades	Food Industry Std.	Certification		Each		Each		Each		Each
For Cold or Hot Water—Countertop Mount







				Bottle Fillers

				9 13/16"	Compression	3/8"	Brass	Yes	Straight Blade	2	NSF/ANSI 61	UL Listed, C-UL Listed	0000000	0000000	0000000	0000000	———	0	0000000	000000




						Bottle Fillers with Filter

						9 13/16"	Compression	3/8"	Brass	Yes	Straight Blade	2	NSF/ANSI 61	UL Listed, C-UL Listed	0000000	00000000	0000000	000000	0000000	0000000	0000000	00000