We will reply to your message within an hour.
More
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.
The oil in these bearings is suitable for incidental contact with food.
A metal shell adds strength.
Use where high loads and speeds are not required.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Good for underwater applications, these bearings won’t swell or warp when wet.
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.
Reduce your carbon footprint without sacrificing performance. Made of recycled thermoplastic, these bearings are a sustainable alternative to standard plastic dry-running bearings.
Rated UL94 V-0, these bearings meet strict fire protection requirements for flame retardance.
Made of thermoplastic, these bearings conduct electricity to prevent static buildup in moving equipment.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
An aluminum shell adds strength.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.
Meet strict fire protection requirements with these bearings—they’re rated UL94 V-0 for flame retardance.
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.
Made of thermoplastic, these bearings conduct electricity to prevent static buildup in loads parallel and perpendicular to your shaft.
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
Made from slippery materials, these bearings reduce friction without the oily mess.
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.
These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.