Keep the most common L-key sizes in one portable set so the right size is always ready. These L-keys are precision manufactured to tight tolerances for an exact fit.

Fully color-coated for quick identification. Each key’s color corresponds to a specific drive size, so you can grab the key you need and get cranking. These L-keys are precision manufactured to tight tolerances. A ball tip on the long leg engages the drive with less contact than a straight tip to turn screws at an angle instead of head on. Ball tips are handy for corners and tightly packed areas, however, they don’t grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard.

Fasten a variety of screw sizes in compact machinery where overhead clearance is minimal. These L-keys have a stubby leg that's up to 50% shorter than others to squeeze into extremely tight spaces. They also have a ball tip on one or both ends that engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips don't grip as tightly as straight tips, however, and may strip the drive of the fastener if you crank them too hard.

These L-keys unfold from the top and bottom of the handle, so you can quickly select the one you need without unstacking the others. The handle gives you leverage to tighten with minimal effort.

Multiple keys in common sizes provide backups that reach corners and tight spaces when one goes missing or wears out. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.

Grip a variety of screws to start and remove them in hard-to-reach places. The ball tip has a detent or retaining ring that holds screws securely to prevent them from falling off as you fasten. The tip also engages the drive at an angle to squeeze into tight spots.

Mount these rugged metal cases at your workstation so your L-keys are always in reach. When closed, they keep your tools protected; when open, they provide full access to your set without taking up extra space. These L-keys are precision manufactured to tight tolerances.

Made of beryllium copper that is Factory Mutual (FM) approved, these L-key sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

Store L-keys that work in corners and tight spaces within reach. These rugged metal cases mount to your workstation and keep your tools protected when closed. When open, they offer full access to your set without taking up extra space. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips and may strip the fastener if you crank them too hard.

These L-keys turn screws at an angle when you can't access them head on. Fold them into the handle like a Swiss army knife when finished for easy storage and portability.

Multiple L-keys fold up in the handle for easy carrying, similar to a Swiss army knife. Slip these sets in your pocket and never worry about misplacing individual keys. The handle gives you leverage to tighten with minimal effort.