McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    23 Products

    T-Slot Bolts

    For quicker setups than a separate T-slot nut and stud, slide these bolts into T-slot tracks on machine tool tables.
    Machined Neck
    Image of Product. Front orientation. Contains Annotated. T-Slot Bolts. Machined Neck.
    Head,
    mm
    Partially
    Threaded
    Lg.,
    mm
    Thread
    Lg., mm
    Thread Size
    Lg.
    Wd.
    Ht.
    Min. Tensile
    Strength, psi
    Fastener Strength
    Grade/Class
    Specs.
    Met
    Each
    Black-Oxide Steel
     
    For 6 mm Wide Slots
    2515M6 × 1 mm10104150,000ISO Class 10.9
    DIN 787000000000000000
    4028M6 × 1 mm10104150,000ISO Class 10.9
    DIN 78700000000000000
    6340M6 × 1 mm10104150,000ISO Class 10.9
    DIN 78700000000000000
     
    For 8 mm Wide Slots
    3222M8 × 1.25 mm13136150,000ISO Class 10.9
    DIN 78700000000000000
    5035M8 × 1.25 mm13136150,000ISO Class 10.9
    DIN 78700000000000000
     
    For 10 mm Wide Slots
    4030M10 × 1.5 mm15156150,000ISO Class 10.9
    DIN 78700000000000000
    6345M10 × 1.5 mm15156150,000ISO Class 10.9
    DIN 78700000000000000
    10060M10 × 1.5 mm15156150,000ISO Class 10.9
    DIN 78700000000000000
     
    For 12 mm Wide Slots
    5035M12 × 1.75 mm18187150,000ISO Class 10.9
    DIN 78700000000000000
    6340M12 × 1.75 mm18187150,000ISO Class 10.9
    DIN 78700000000000000
    8055M12 × 1.75 mm18187150,000ISO Class 10.9
    DIN 78700000000000000
    12575M12 × 1.75 mm18187150,000ISO Class 10.9
    DIN 78700000000000000
     
    For 14 mm Wide Slots
    5035M12 × 1.75 mm22228150,000ISO Class 10.9
    DIN 78700000000000000
    8055M12 × 1.75 mm22228150,000ISO Class 10.9
    DIN 78700000000000000
    12575M12 × 1.75 mm22228150,000ISO Class 10.9
    DIN 78700000000000000
     
    For 18 mm Wide Slots
    6345M16 × 2 mm282810110,000ISO Class 8.8
    DIN 78700000000000000
    10063M16 × 2 mm282810110,000ISO Class 8.8
    DIN 78700000000000000
    160100M16 × 2 mm282810110,000ISO Class 8.8
    DIN 78700000000000000
     

    T-Slot Cleaners

    Image of Product. Front orientation. T-Slot Cleaners. Steel.
    Image of Product. Front orientation. T-Slot Cleaners. Black Oxide Steel.

    Steel

    Black Oxide Steel

    Scrape debris out of machine table T-slots.
    For
    Slot Wd.
    Inch
    Metric, mm
    Overall
    Lg.
    Each
    Black Oxide Steel
    1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8"16, 17, 18, 20, 22, 27, 336"00000000000000
     
    Steel
    7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4"22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 327 1/4"00000000000000
     

    T-Slot Covers

    Image of ProductInUse. Front orientation. T-Slot Covers.
    Prevent chips, debris, and small parts from falling into T-slots. These covers snap securely into T-slots but can be easily removed to change your table setup. They can be cut to length.
    For Slot
    Width, mm
    Lg.
    Each
    Aluminum
    1839"0000000000000
    2239"000000000000
    2839"000000000000
     
    back to top