Filter by
Diameter
Fitting Type
Attachment Type
Wire Rope Construction
Application
Wire Rope Material
Sleeve Length
Required Installation Tool
Military Specification
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Eye-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
316 Stainless Steel—316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Eye | |||||||||||||
Dia. | Construction | End-to-Eye Lg. | ID | Thk. | Shank Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 5/8" | 3/16" | 1/16" | 3/16" | 90 | MS20668 | 3872T11 | 00000 | 2 | 3429T11 | 0000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/8" | 3/16" | 100 | MS20668 | 3872T12 | 0000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 5/16" | 3/16" | 3/16" | 1/4" | 400 | MS20668 | 3872T13 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 11/16" | 1/4" | 3/16" | 5/16" | 500 | MS20668 | 3872T14 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 3" | 5/16" | 1/4" | 3/8" | 800 | MS20668 | 3872T15 | 00000 | 2 | 3429T15 | 000000 | ||
| 7/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 3/8" | 5/16" | 9/32" | 27/64" | 1,120 | MS20668 | 3872T16 | 00000 | — | ——— | 0 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 3 3/4" | 3/8" | 5/16" | 1/2" | 1,400 | MS20668 | 3872T17 | 00000 | 2 | 3429T17 | 000000 | ||
316 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 1/2" | 1/4" | 7/32" | 5/32" | 90 | — | 3872T21 | 0000 | — | ——— | 0 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 1 9/16" | 1/4" | 7/32" | 7/32" | 180 | — | 3872T22 | 00000 | — | ——— | 0 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 3/32" | 1/4" | 7/32" | 1/4" | 400 | — | 3872T23 | 00000 | — | ——— | 0 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 11/32" | 5/16" | 9/32" | 19/64" | 560 | — | 3872T24 | 00000 | — | ——— | 0 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 2 3/4" | 3/8" | 23/64" | 23/64" | 840 | — | 3872T25 | 00000 | — | ——— | 0 | ||
| 7/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 7/32" | 7/16" | 13/32" | 27/64" | 1,120 | — | 3872T26 | 00000 | — | ——— | 0 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 Strand Core 19 × 7 Strand Core | 3 5/8" | 1/2" | 15/32" | 1/2" | 1,400 | — | 3872T27 | 00000 | — | ——— | 0 | ||
Stud-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, per manent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Thread | |||||||||||||
Dia. | Construction | Overall Lg. | Size | Lg. | Shank Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 6-40 | 1 1/16" | 3/16" | 90 | MS21259 | 3870T21 | 00000 | 2 | 3429T11 | 0000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 15/16" | 10-32 | 1 1/4" | 1/4" | 100 | MS21259 | 3870T22 | 0000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/8" | 1/4"-28 | 1 7/16" | 1/4" | 400 | MS21259 | 3870T23 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 11/16" | 1/4"-28 | 1 7/16" | 5/16" | 500 | MS21259 | 3870T27 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 1/16" | 5/16"-24 | 1 1/2" | 3/8" | 800 | MS21259 | 3870T25 | 00000 | 2 | 3429T15 | 000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 4 15/16" | 3/8"-24 | 1 3/4" | 1/2" | 1,400 | MS21259 | 3870T26 | 00000 | 2 | 3429T17 | 000000 | ||
Wire Rope Compression Sleeves—For Lifting
 |  |
Install with a compression tool to create a strong, permanent loop. Compression sleeves are also known as ferrules, crimps, swaging, and splicing sleeves. They're compatible with Nicopress compression tools.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Tin-Plated Copper—Tin-plated copper sleeves have mild corrosion resistance.
Black-Oxide Copper—Black-oxide copper sleeves have a dark surface color and mild corrosion resistance.
Zinc-Plated Copper—Zinc-plated copper sleeves are more corrosion resistant than tin-plated or black-oxide copper.
18-8 Stainless Steel—18-8 stainless steel sleeves have excellent corrosion resistance to chemicals.
Sleeves | Tools | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | |||||||||||||
Dia. | Construction | Sleeve Lg. | Req. No. of Compressions | Rope Cap. Adjustment Factor | Specs. Met | Mil. Spec. | Pkg. Qty. | Pkg. | Each | ||||
Copper | |||||||||||||
For Steel Rope | |||||||||||||
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3897T21 | 00000 | 3582T5 | 0000000 | ||
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3897T22 | 00000 | 3582T5 | 000000 | ||
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3897T23 | 00000 | 3582T1 | 000000 | ||
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% | ASME B30.9 | MS51844 | 25 | 3897T5 | 00000 | 3582T1 | 000000 | ||
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% | ASME B30.9 | MS51844 | 10 | 3897T6 | 0000 | 3582T3 | 000000 | ||
| 3/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 15/16" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3897T7 | 00000 | 3582T3 | 000000 | ||
| 7/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 7/8" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3897T8 | 00000 | 35155T17 | 000000 | ||
| 1/4" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/8" | 3 | 100% | ASME B30.9 | MS51844 | 10 | 3897T9 | 00000 | 3377T18 | 000000 | ||
| 5/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/16" | 4 | 100% | ASME B30.9 | MS51844 | 5 | 3897T11 | 00000 | 35155T19 | 000000 | ||
| 3/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/4" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3897T12 | 00000 | 3433T178 | 00000000 | ||
| 7/16" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 3/4" | 2 | 100% | ASME B30.9 | MS51844 | 1 | 3897T15 | 00000 | 3433T1 | 00000000 | ||
| 1/2" | 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 7/8" | 6 | 100% | ASME B30.9 | MS51844 | 1 | 3897T43 | 00000 | 3433T197 | 00000000 | ||
| 9/16" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 2" | 3 | 100% | ASME B30.9 | MS51844 | 1 | 3897T16 | 00000 | 3433T2 | 00000000 | ||
| 5/8" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 2 3/8" | 3 | 100% | ASME B30.9 | MS51844 | 1 | 3897T17 | 00000 | 3433T3 | 00000000 | ||
| 0.027" to 1/32" | 7 × 7 Strand Core | 1/4" | 2 | 100% | ASME B30.9 | MS51844 | 50 | 3897T31 | 0000 | 3377T23 | 00000 | ||
Tin-Plated Copper | |||||||||||||
For Steel and Stainless Steel Rope | |||||||||||||
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3883T21 | 00000 | 3582T5 | 000000 | ||
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3883T22 | 00000 | 3582T5 | 000000 | ||
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3883T42 | 00000 | 3582T1 | 000000 | ||
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% | ASME B30.9 | MS51844 | 25 | 3883T43 | 00000 | 3582T1 | 000000 | ||
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% | ASME B30.9 | MS51844 | 10 | 3883T44 | 0000 | 3582T3 | 000000 | ||
| 3/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 15/16" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3883T45 | 00000 | 3582T3 | 000000 | ||
| 7/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 7/8" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3883T46 | 00000 | 35155T17 | 000000 | ||
| 1/4" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1" | 3 | 100% | ASME B30.9 | MS51844 | 5 | 3883T47 | 00000 | 3377T18 | 000000 | ||
| 5/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/16" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3883T48 | 0000 | 35155T19 | 000000 | ||
| 3/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 3/16" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3883T71 | 00000 | 3433T178 | 00000000 | ||
For Stainless Steel Rope | |||||||||||||
| 1/2" | 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 7/8" | 3 | 100% | ASME B30.9 | MS51844 | 1 | 3883T51 | 00000 | 3433T197 | 00000000 | ||
Black-Oxide Copper | |||||||||||||
For Steel Rope | |||||||||||||
| 1/16" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 3/8" | 1 | 100% | ASME B30.9 | — | 50 | 3576N11 | 00000 | 3582T1 | 000000 | ||
| 1/4" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 1/8" | 2 | 100% | ASME B30.9 | — | 5 | 3576N12 | 00000 | 3377T18 | 000000 | ||
| 3/8" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 1/4" | 4 | 100% | ASME B30.9 | — | 2 | 3576N14 | 00000 | 3377T14 | 000000 | ||
For Steel and Stainless Steel Rope | |||||||||||||
| 1/8" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 9/16" | 3 | 100% | ASME B30.9 | — | 10 | 3576N16 | 0000 | 3582T1 | 000000 | ||
| 5/32" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 5/8" | 4 | 100% | ASME B30.9 | — | 10 | 3576N15 | 00000 | 3582T1 | 000000 | ||
| 3/16" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 15/16" | 4 | 100% | ASME B30.9 | — | 5 | 3576N17 | 00000 | 3582T6 | 000000 | ||
| 7/32" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 7/8" | 4 | 100% | ASME B30.9 | — | 5 | 3576N18 | 00000 | 35155T17 | 000000 | ||
Zinc-Plated Copper | |||||||||||||
For Steel Rope | |||||||||||||
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3898T31 | 0000 | 3582T5 | 000000 | ||
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3898T32 | 00000 | 3582T5 | 000000 | ||
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3898T33 | 00000 | 3582T1 | 000000 | ||
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/16" | 3 | 100% | ASME B30.9 | MS51844 | 25 | 3898T14 | 00000 | 3582T1 | 000000 | ||
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 5/8" | 3 | 100% | ASME B30.9 | MS51844 | 10 | 3898T15 | 0000 | 3582T3 | 000000 | ||
| 3/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 15/16" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3898T16 | 00000 | 3582T3 | 000000 | ||
| 7/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 7/8" | 4 | 100% | ASME B30.9 | MS51844 | 10 | 3898T17 | 00000 | 35155T17 | 000000 | ||
| 1/4" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/8" | 3 | 100% | ASME B30.9 | MS51844 | 5 | 3898T18 | 00000 | 3377T18 | 000000 | ||
| 5/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/16" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3898T19 | 00000 | 35155T19 | 000000 | ||
| 3/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/4" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3898T21 | 00000 | 3433T178 | 00000000 | ||
| 7/16" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 3/4" | 2 | 100% | ASME B30.9 | MS51844 | 1 | 3898T41 | 00000 | 3433T1 | 00000000 | ||
| 1/2" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 7/8" | 6 | 100% | ASME B30.9 | MS51844 | 1 | 3898T2 | 00000 | 3433T197 | 00000000 | ||
| 5/8" | 3 × 7 IWRC 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 2 3/8" | 3 | 100% | ASME B30.9 | MS51844 | 1 | 3898T43 | 00000 | 3433T3 | 00000000 | ||
| 0.027" to 1/32" | 7 × 7 Strand Core | 1/4" | 1 | 100% | ASME B30.9 | MS51844 | 50 | 3898T29 | 0000 | 3377T23 | 00000 | ||
18-8 Stainless Steel | |||||||||||||
For Steel and Stainless Steel Rope | |||||||||||||
| 1/32" | 7 × 7 Strand Core | 1/4" | 1 | 100% | ASME B30.9 | MS51844 | 10 | 3755T11 | 00000 | 3632T17 | 000000 | ||
| 3/64" | 7 × 7 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 10 | 3755T12 | 00000 | 3582T5 | 000000 | ||
| 1/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 10 | 3755T13 | 00000 | 3377T11 | 000000 | ||
| 3/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 10 | 3755T14 | 00000 | 3377T12 | 000000 | ||
| 1/8" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 1 | 100% | ASME B30.9 | MS51844 | 5 | 3755T15 | 00000 | 3632T13 | 000000 | ||
| 5/32" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 23/32" | 3 | 100% | ASME B30.9 | MS51844 | 2 | 3755T16 | 00000 | 35155T14 | 000000 | ||
| 3/16" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1" | 4 | 100% | ASME B30.9 | MS51844 | 2 | 3755T17 | 00000 | 35155T15 | 000000 | ||
| 1/4" | 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 6 × 19 IWRC | 1 1/8" | 1 | 100% | ASME B30.9 | MS51844 | 1 | 3755T1 | 00000 | 3433T173 | 00000000 | ||
For Stainless Steel Rope | |||||||||||||
| 7/32" | 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 7/8" | 1 | 100% | ASME B30.9 | MS51844 | 1 | 3755T22 | 0000 | ——— | 0 | ||
| 5/16" | 7 × 7 IWRC 7 × 19 IWRC 6 × 19 IWRC | 1 1/8" | 3 | 100% | ASME B30.9 | MS51844 | 1 | 3755T21 | 00000 | ——— | 0 | ||
Ball-with-Shank-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, these fittings have excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Ball | |||||||||||||
Dia. | Construction | Lg. | Shank Dia. | Lg. | Dia. | Wt. Cap., lb. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 9/32" | 1/8" | 1/8" | 7/32" | 90 | MS20664 | 3869T61 | 00000 | 2 | 3429T23 | 000000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/8" | 11/64" | 1/8" | 9/32" | 100 | MS20664 | 3869T62 | 0000 | 2 | 3429T24 | 00000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1/2" | 7/32" | 3/16" | 11/32" | 400 | MS20664 | 3869T63 | 0000 | 2 | 3429T25 | 00000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 19 × 7 Strand Core | 5/8" | 17/64" | 1/4" | 7/16" | 500 | MS20664 | 3869T64 | 0000 | 2 | 3429T26 | 00000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 23/32" | 19/64" | 1/4" | 1/2" | 800 | MS20664 | 3869T65 | 0000 | 2 | 3429T27 | 00000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 31/32" | 13/32" | 5/16" | 5/8" | 1,400 | MS20664 | 3869T67 | 00000 | 2 | 3429T29 | 00000000 | ||
Clevis-End Roller Swage Wire Rope End Fittings—Not for Lifting
 |
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, they offer excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Dies | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | ||||||||||||||
Dia. | Construction | End-to-Eye Lg. | Clevis Inside Wd. | Shank Dia. | Wt. Cap., lb. | For Pin Dia. | Mil. Spec. | Each | Pkg. Qty. | Pkg. | ||||
18-8 Stainless Steel | ||||||||||||||
| 1/16" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 5/8" | 1/8" | 3/16" | 90 | 3/16" | MS20667 | 3865T12 | 000000 | 2 | 3429T11 | 0000000 | ||
| 3/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2" | 1/8" | 1/4" | 100 | 3/16" | MS20667 | 3865T13 | 00000 | 2 | 3429T12 | 000000 | ||
| 1/8" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 3/8" | 1/4" | 1/4" | 400 | 3/16" | MS20667 | 3865T14 | 00000 | 2 | 3429T13 | 000000 | ||
| 5/32" | 1 × 7 Strand Core 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 11/16" | 1/4" | 5/16" | 500 | 1/4" | MS20667 | 3865T15 | 00000 | 2 | 3429T14 | 000000 | ||
| 3/16" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 1/8" | 5/16" | 3/8" | 800 | 5/16" | MS20667 | 3865T16 | 00000 | 2 | 3429T15 | 000000 | ||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC | 3 13/16" | 5/16" | 1/2" | 1,400 | 3/8" | MS20667 | 3865T18 | 00000 | 2 | 3429T17 | 000000 | ||
Wire Rope Compression Sleeve Assortments—Not for Lifting
 |
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Aluminum Compression Sleeve—Aluminum sleeves are an economical alternative to copper.
Copper Compression Sleeve—Copper sleeves are stronger than aluminum.
Tin-Plated Copper Compression Sleeve—Tin-plated copper sleeves have mild corrosion resistance.
Zinc-Plated Copper Compression Sleeve—Zinc-plated copper sleeves are more corrosion resistant than tin-plated copper.
For Wire Rope | ||||||||
|---|---|---|---|---|---|---|---|---|
No. of Sleeves | Dia. | Construction | Compression Sleeve Material | Stop Sleeve Material | Mil. Spec. | Each | ||
| 270 | 3/64" (35 Compression Sleeves) 1/16" (50 Compression Sleeves, 50 Stop Sleeves) 3/32" (30 Compression Sleeves, 30 Stop Sleeves) 5/32" (8 Compression Sleeves, 8 Stop Sleeves) 1/8" (20 Compression Sleeves, 20 Stop Sleeves) 3/16" (6 Compression Sleeves, 8 Stop Sleeves) 1/4" (3 Compression Sleeves, 2 Stop Sleeves) | 1 × 19 Strand Core 1 × 7 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Aluminum | Aluminum | MS51844 | 30965T1 | 0000000 | |
| 305 | 3/64" (35 Compression Sleeves, 35 Stop Sleeves) 1/16" (50 Compression Sleeves, 50 Stop Sleeves) 3/32" (30 Compression Sleeves, 30 Stop Sleeves) 5/32" (8 Compression Sleeves, 8 Stop Sleeves) 1/8" (20 Compression Sleeves, 20 Stop Sleeves) 3/16" (6 Compression Sleeves, 8 Stop Sleeves) 1/4" (3 Compression Sleeves, 2 Stop Sleeves) | 1 × 19 Strand Core 1 × 7 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Tin-Plated Copper | Zinc-Plated Copper | MS51844 | 30965T3 | 000000 | |
| 385 | 1/32" (40 Compression Sleeves, 40 Stop Sleeves) 3/64" (35 Compression Sleeves, 35 Stop Sleeves) 1/16" (50 Compression Sleeves, 50 Stop Sleeves) 3/32" (30 Compression Sleeves, 30 Stop Sleeves) 5/32" (8 Compression Sleeves, 8 Stop Sleeves) 1/8" (20 Compression Sleeves, 20 Stop Sleeves) 3/16" (6 Compression Sleeves, 8 Stop Sleeves) 1/4" (3 Compression Sleeves, 2 Stop Sleeves) | 1 × 19 Strand Core 1 × 7 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Copper | Copper | MS51844 | 30965T2 | 000000 | |
| 385 | 1/32" (40 Compression Sleeves, 40 Stop Sleeves) 3/64" (35 Compression Sleeves, 35 Stop Sleeves) 1/16" (50 Compression Sleeves, 50 Stop Sleeves) 3/32" (30 Compression Sleeves, 30 Stop Sleeves) 5/32" (8 Compression Sleeves, 8 Stop Sleeves) 1/8" (20 Compression Sleeves, 20 Stop Sleeves) 3/16" (6 Compression Sleeves, 8 Stop Sleeves) 1/4" (3 Compression Sleeves, 2 Stop Sleeves) | 1 × 19 Strand Core 1 × 7 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Zinc-Plated Copper | Zinc-Plated Copper | MS51844 | 30965T4 | 000000 | |
Light Duty Wire Rope Thimbles—Not for Lifting
 |
Loop | ||||||||
|---|---|---|---|---|---|---|---|---|
For Dia. | Inside Lg. | Inside Wd. | Mil. Spec. | Pkg. Qty. | Pkg. | |||
Zinc-Plated Steel | ||||||||
| 3/64", 1/16", 5/64", 3/32" | 11/16" | 3/8" | AN100, MIL-T-5677 | 10 | 8914T12 | 00000 | ||
| 3/32", 7/64", 1/8" | 3/4" | 3/8" | AN100, MIL-T-5677 | 10 | 8914T13 | 0000 | ||
| 5/32" | 13/16" | 7/16" | AN100, MIL-T-5677 | 10 | 8914T14 | 0000 | ||
| 3/16" | 1" | 1/2" | AN100, MIL-T-5677 | 10 | 8914T15 | 0000 | ||
| 7/32", 1/4" | 1 7/16" | 3/4" | AN100, MIL-T-5677 | 5 | 8914T16 | 0000 | ||
| 9/32", 5/16" | 1 13/16" | 15/16" | AN100, MIL-T-5677 | 5 | 8914T17 | 0000 | ||
| 3/8" | 2" | 1" | AN100, MIL-T-5677 | 5 | 8914T18 | 00000 | ||
18-8 Stainless Steel | ||||||||
| 3/64", 1/16", 5/64", 3/32" | 11/16" | 3/8" | AN100, MIL-T-5677 | 10 | 8914T22 | 0000 | ||
| 3/32", 7/64", 1/8" | 3/4" | 3/8" | AN100, MIL-T-5677 | 10 | 8914T23 | 00000 | ||
| 5/32" | 13/16" | 7/16" | AN100, MIL-T-5677 | 10 | 8914T24 | 00000 | ||
| 3/16" | 1" | 1/2" | AN100, MIL-T-5677 | 10 | 8914T25 | 00000 | ||
| 7/32", 1/4" | 1 7/16" | 3/4" | AN100, MIL-T-5677 | 1 | 8914T26 | 0000 | ||
| 9/32", 5/16" | 1 13/16" | 15/16" | AN100, MIL-T-5677 | 1 | 8914T28 | 0000 | ||
| 3/8" | 2" | 1" | AN100, MIL-T-5677 | 1 | 8914T27 | 0000 | ||
Wire Rope Compression Sleeve and Thimble Kits—Not for Lifting
 |  |
Compression sleeves create a strong permanent loop while the thimbles protect the inside of wire rope loops from fraying.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Zinc-Plated Steel Thimble—Zinc-plated steel thimbles are corrosion resistant.
18-8 Stainless Steel Thimble—18-8 stainless steel thimbles have excellent corrosion resistance.
Loop | Sleeve | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope Diameter | Inside Wd. | Inside Lg. | No. of | Lg. | No. of Thimbles | Req. No. of Compressions | Rope Cap. Adjustment Factor | Mil. Spec. | Each | |||
Copper Sleeves with Zinc-Plated Steel Thimbles | ||||||||||||
For Steel Rope | ||||||||||||
| 3/64" | 11/32" | 11/16" | 2 | 3/8" | 2 | 2 | 90% | MS51844 | 1773N11 | 00000 | ||
| 1/16" | 11/32" | 11/16" | 2 | 3/8" | 2 | 2 | 90% | MS51844 | 1773N12 | 0000 | ||
| 3/32" | 11/32" | 11/16" | 2 | 7/16" | 2 | 2 | 90% | MS51844 | 1773N13 | 0000 | ||
| 1/8" | 11/32" | 23/32" | 2 | 9/16" | 2 | 3 | 90% | MS51844 | 1773N14 | 0000 | ||
| 5/32" | 13/32" | 13/16" | 2 | 5/8" | 2 | 3 | 90% | MS51844 | 1773N15 | 0000 | ||
| 3/16" | 1/2" | 1" | 2 | 1" | 2 | 4 | 90% | MS51844 | 1773N16 | 0000 | ||
| 1/4" | 11/16" | 1 13/32" | 2 | 1 1/8" | 2 | 4 | 90% | MS51844 | 1773N17 | 0000 | ||
| 5/16" | 29/32" | 1 13/16" | 2 | 1 1/8" | 2 | 4 | 90% | MS51844 | 1773N18 | 00000 | ||
| 3/8" | 1" | 2" | 2 | 1 5/16" | 2 | 5 | 90% | MS51844 | 1773N19 | 00000 | ||
Copper Sleeves with 18-8 Stainless Steel Thimbles | ||||||||||||
For Stainless Steel Rope | ||||||||||||
| 3/64" | 11/32" | 11/16" | 2 | 3/8" | 2 | 2 | 90% | MS51844 | 1773N21 | 0000 | ||
| 1/16" | 11/32" | 11/16" | 2 | 3/8" | 2 | 2 | 90% | MS51844 | 1773N22 | 0000 | ||
| 3/32" | 11/32" | 11/16" | 2 | 7/16" | 2 | 2 | 90% | MS51844 | 1773N23 | 0000 | ||
| 1/8" | 11/32" | 23/32" | 2 | 9/16" | 2 | 3 | 90% | MS51844 | 1773N24 | 0000 | ||
| 5/32" | 13/32" | 13/16" | 2 | 5/8" | 2 | 3 | 90% | MS51844 | 1773N25 | 0000 | ||
| 3/16" | 1/2" | 1" | 2 | 1" | 2 | 4 | 90% | MS51844 | 1773N26 | 0000 | ||
| 1/4" | 11/16" | 1 13/32" | 2 | 1 1/8" | 2 | 4 | 90% | MS51844 | 1773N27 | 00000 | ||
| 5/16" | 29/32" | 1 13/16" | 2 | 1 1/8" | 2 | 4 | 90% | MS51844 | 1773N28 | 00000 | ||
| 3/8" | 1" | 2" | 2 | 1 5/16" | 2 | 5 | 90% | MS51844 | 1773N29 | 00000 | ||
Forged One-Piece Wire Rope Clamps—Not for Lifting
 |  |
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves. Their forged fabrication makes these clamps more reliable in critical applications such as tie downs and support lines.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Clamp | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Construction | Lg. | Wd. | Fabrication | Req. Torque, ft·lbf | Rope Cap. Adjustment Factor | Mil. Spec. | Each | |||
Zinc-Plated Steel | |||||||||||
| 1/8" | 6 × 19 IWRC 7 × 19 IWRC | 29/32" | 5/8" | Forged | 35 | 90% | Fed. Spec. FF-C-450, MS16843 | 3489T47 | 000000 | ||
| 1/4" | 6 × 19 IWRC 7 × 19 IWRC | 1 11/32" | 1" | Forged | 145 | 90% | Fed. Spec. FF-C-450, MS16843 | 3489T52 | 00000 | ||
| 5/16" | 6 × 19 IWRC 7 × 19 IWRC | 1 19/32" | 1 1/4" | Forged | 225 | 90% | Fed. Spec. FF-C-450, MS16843 | 3489T53 | 00000 | ||
| 3/8" | 6 × 19 IWRC 7 × 19 IWRC | 1 7/8" | 1 7/16" | Forged | 325 | 90% | Fed. Spec. FF-C-450, MS16843 | 3489T54 | 00000 | ||
