Filter by
Material
Length of Cut
Overall Length
Sold As
Length
RoHS
REACH
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Carbide Drill/Mill End Mills
 |
Drill/Mill Cut Style |
 |
2 Flutes |
 |
4 Flutes |
Made of solid carbide, these end mills are harder, stronger, and more wear resistant than cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. All are center cutting, allowing plunge cuts into a surface.
Uncoated Carbide—Use uncoated end mills for general purpose milling and short production runs.
Titanium Nitride (TiN)-Coated Carbide—Titanium nitride (TiN)-coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
Titanium Aluminum Nitride (TiAlN)-Coated Carbide—Titanium aluminum nitride (TiAlN)-coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills.
2 Flutes—End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.
4 Flutes—End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.
Mill | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Point Angle | Helix Angle | For Use On | End Mill Type | Cut Style | Each | |||
Uncoated Carbide | ||||||||||||||
2 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A52 | 000000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A54 | 00000 | ||
| 1/8" | -0.003" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A61 | 00000 | ||
| 3/16" | -0.003" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A63 | 00000 | ||
| 1/4" | -0.003" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A65 | 00000 | ||
| 5/16" | -0.003" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A67 | 00000 | ||
| 3/8" | -0.003" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A69 | 00000 | ||
| 1/2" | -0.003" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A72 | 00000 | ||
| 5/8" | -0.003" to 0.000" | 5/8" | 1 1/2" | 3 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A74 | 000000 | ||
| 3/4" | -0.003" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A76 | 000000 | ||
4 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A22 | 00000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A24 | 00000 | ||
| 1/8" | -0.003" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A11 | 00000 | ||
| 3/16" | -0.003" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A12 | 00000 | ||
| 1/4" | -0.003" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A13 | 00000 | ||
| 5/16" | -0.003" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A14 | 00000 | ||
| 3/8" | -0.003" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A15 | 00000 | ||
| 1/2" | -0.003" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A16 | 00000 | ||
| 5/8" | -0.003" to 0.000" | 5/8" | 1 1/4" | 3 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A17 | 000000 | ||
| 3/4" | -0.003" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A18 | 000000 | ||
| 3 mm | -0.051 mm to 0.000 mm | 3 mm | 12 mm | 38 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A311 | 00000 | ||
| 4 mm | -0.051 mm to 0.000 mm | 4 mm | 14 mm | 50 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A312 | 00000 | ||
| 6 mm | -0.051 mm to 0.000 mm | 6 mm | 19 mm | 50 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A313 | 00000 | ||
| 8 mm | -0.051 mm to 0.000 mm | 8 mm | 20 mm | 63 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A314 | 00000 | ||
| 10 mm | -0.051 mm to 0.000 mm | 10 mm | 22 mm | 70 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A315 | 00000 | ||
| 12 mm | -0.051 mm to 0.000 mm | 12 mm | 25 mm | 74 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8747A316 | 00000 | ||
Titanium Nitride (TiN)-Coated Carbide | ||||||||||||||
2 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A51 | 00000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A52 | 00000 | ||
| 1/8" | -0.003" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A53 | 00000 | ||
| 3/16" | -0.003" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A54 | 00000 | ||
| 1/4" | -0.003" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A55 | 00000 | ||
| 5/16" | -0.003" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A56 | 00000 | ||
| 3/8" | -0.003" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A57 | 00000 | ||
| 1/2" | -0.003" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A58 | 00000 | ||
| 5/8" | -0.003" to 0.000" | 5/8" | 1 1/2" | 3 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A59 | 000000 | ||
| 3/4" | -0.003" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A61 | 000000 | ||
4 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A41 | 00000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A42 | 00000 | ||
| 1/8" | -0.002" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A43 | 00000 | ||
| 3/16" | -0.002" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A44 | 00000 | ||
| 1/4" | -0.002" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A45 | 00000 | ||
| 5/16" | -0.002" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A46 | 00000 | ||
| 3/8" | -0.002" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A47 | 00000 | ||
| 1/2" | -0.002" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A48 | 00000 | ||
| 5/8" | -0.002" to 0.000" | 5/8" | 1 1/2" | 3 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A49 | 000000 | ||
| 3/4" | -0.002" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A51 | 000000 | ||
Titanium Aluminum Nitride (TiAlN)-Coated Carbide | ||||||||||||||
2 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A23 | 00000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A25 | 00000 | ||
| 1/8" | -0.003" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A11 | 00000 | ||
| 3/16" | -0.003" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A12 | 00000 | ||
| 1/4" | -0.003" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A13 | 00000 | ||
| 5/16" | -0.003" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A14 | 00000 | ||
| 3/8" | -0.003" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A15 | 00000 | ||
| 1/2" | -0.003" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A16 | 00000 | ||
| 5/8" | -0.003" to 0.000" | 5/8" | 1 1/2" | 3 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A17 | 000000 | ||
| 3/4" | -0.003" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 3723A18 | 000000 | ||
4 Flutes | ||||||||||||||
| 1/16" | -0.003" to 0.000" | 1/8" | 3/16" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A33 | 00000 | ||
| 3/32" | -0.003" to 0.000" | 1/8" | 3/8" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A35 | 00000 | ||
| 1/8" | -0.002" to 0.000" | 1/8" | 1/2" | 1 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A11 | 00000 | ||
| 3/16" | -0.002" to 0.000" | 3/16" | 5/8" | 2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A12 | 00000 | ||
| 1/4" | -0.002" to 0.000" | 1/4" | 3/4" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A13 | 00000 | ||
| 5/16" | -0.002" to 0.000" | 5/16" | 13/16" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A14 | 00000 | ||
| 3/8" | -0.002" to 0.000" | 3/8" | 1" | 2 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A15 | 00000 | ||
| 1/2" | -0.002" to 0.000" | 1/2" | 1" | 3" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A16 | 00000 | ||
| 5/8" | -0.002" to 0.000" | 5/8" | 1 1/2" | 3 1/2" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A17 | 000000 | ||
| 3/4" | -0.002" to 0.000" | 3/4" | 1 1/2" | 4" | Equal | 90° | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8905A18 | 000000 | ||
Cobalt Steel Drill/Mill End Mills
 |
Made of cobalt steel, these end mills have good heat and wear resistance, so they can run at high speeds in hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. All are center cutting, allowing plunge cuts into a surface.
Uncoated Cobalt Steel—Use uncoated end mills for general purpose milling and short production runs.
Titanium Nitride (TiN)-Coated Cobalt Steel—Use titanium nitride (TiN)-coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.
Mill | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Point Angle | Helix Angle | For Use On | End Mill Type | Cut Style | Each | |||
Uncoated Cobalt Steel | ||||||||||||||
Drill/Mill Cut Style | ||||||||||||||
2 Flutes | ||||||||||||||
| 1/4" | 0.0000" to 0.0015" | 3/8" | 5/8" | 2 7/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A11 | 000000 | ||
| 5/16" | 0.0000" to 0.0015" | 3/8" | 23/32" | 2 15/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A12 | 00000 | ||
| 3/8" | 0.0000" to 0.0015" | 3/8" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A13 | 00000 | ||
| 7/16" | 0.0000" to 0.0015" | 3/8" | 1 1/32" | 2 23/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A14 | 00000 | ||
| 1/2" | 0.0000" to 0.0015" | 1/2" | 1 1/4" | 3 1/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A15 | 00000 | ||
| 9/16" | 0.0000" to 0.0015" | 1/2" | 1 13/32" | 3 13/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A16 | 00000 | ||
| 5/8" | 0.0000" to 0.0015" | 5/8" | 1 5/8" | 3 3/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A17 | 00000 | ||
| 3/4" | 0.0000" to 0.0015" | 3/4" | 1 11/16" | 3 15/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A19 | 00000 | ||
| 7/8" | 0.0000" to 0.0015" | 3/4" | 1 15/16" | 4 3/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A21 | 00000 | ||
| 1" | 0.0000" to 0.0015" | 3/4" | 2" | 4 1/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A22 | 00000 | ||
| 6 mm | 0.0000 mm to 0.04 mm | 6 mm | 13 mm | 57 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A71 | 00000 | ||
| 8 mm | 0.0000 mm to 0.04 mm | 10 mm | 19 mm | 69 mm | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2957A72 | 00000 | ||
Titanium Nitride (TiN)-Coated Cobalt Steel | ||||||||||||||
Drill/Mill Cut Style | ||||||||||||||
2 Flutes | ||||||||||||||
| 1/4" | 0.0000" to 0.0015" | 3/8" | 5/8" | 2 7/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A51 | 00000 | ||
| 5/16" | 0.0000" to 0.0015" | 3/8" | 23/32" | 2 15/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A52 | 00000 | ||
| 3/8" | 0.0000" to 0.0015" | 3/8" | 3/4" | 2 1/2" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A53 | 00000 | ||
| 7/16" | 0.0000" to 0.0015" | 3/8" | 1 1/32" | 2 23/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A54 | 00000 | ||
| 1/2" | 0.0000" to 0.0015" | 1/2" | 1 1/4" | 3 1/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A55 | 00000 | ||
| 9/16" | 0.0000" to 0.0015" | 1/2" | 1 13/32" | 3 13/32" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A56 | 00000 | ||
| 5/8" | 0.0000" to 0.0015" | 5/8" | 1 5/8" | 3 3/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A57 | 00000 | ||
| 3/4" | 0.0000" to 0.0015" | 3/4" | 1 11/16" | 3 15/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A59 | 000000 | ||
| 7/8" | 0.0000" to 0.0015" | 3/4" | 1 15/16" | 4 3/16" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A61 | 000000 | ||
| 1" | 0.0000" to 0.0015" | 3/4" | 2" | 4 1/4" | Equal | 90° | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 8877A62 | 000000 | ||
Drill/Mill End Mill Sets
|  |
Drill/Mill Cut Style |
These multifunction tools have a 90° pointed tip that allows them to be used for drilling as well as for slotting, profiling, and chamfering cuts. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. All are center cutting, allowing plunge cuts into a surface.
No. of Pieces | Includes | Flute Spacing | Helix Angle | Point Angle | For Use On | End Mill Type | Cut Style | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide | |||||||||||
2 Flutes | |||||||||||
| 3 | 1/2" Mill Dia. × 1/2" Shank Dia. × 3" O'all Lg. End Mill 1/4" Mill Dia. × 1/4" Shank Dia. × 2 1/2" O'all Lg. End Mill 3/8" Mill Dia. × 3/8" Shank Dia. × 2 1/2" O'all Lg. End Mill | Equal | 30° | 90° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A81 | 0000000 | ||
4 Flutes | |||||||||||
| 3 | 6 mm Mill Dia. × 6 mm Shank Dia. × 50 mm O'all Lg. End Mill 10 mm Mill Dia. × 10 mm Shank Dia. × 70 mm O'all Lg. End Mill 12 mm Mill Dia. × 12 mm Shank Dia. × 74 mm O'all Lg. End Mill | Equal | 30° | 90° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | Drill/Mill | 2770A91 | 000000 | ||
