Filter by
Drive Size
Drive Style
Sold As
Grip Style
Overall Length
Bolt Clearance
Container Type
DFARS Specialty Metals
REACH
Export Control Classification Number (ECCN)
Surface Resistivity
Static Control Rating
Precise-Control Nutdrivers
 |
Plain Grip |
 |
Ultra Grip |
 |
Make fine-tuned adjustments to electronics and other components. These give you better control than standard nutdrivers to avoid stripping tiny nuts or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the handle with your fingertips.
Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Nickel-Plated Steel—Similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.
Plain Grip—Made of hard plastic for durability.
Ultra Grip—Contoured and coated with soft plastic for a secure grip and maximum comfort.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Each | ||
| 3/32" | 3/8" | 6 1/8" | 2 3/8" | 5/32" | Chrome-Plated Steel | Plain | 7278A33 | 00000 | |
| 7/64" | 5/8" | 6 1/8" | 2 3/8" | 3/16" | Chrome-Plated Steel | Plain | 7278A34 | 0000 | |
| 1/8" | 5/8" | 6 1/8" | 2 3/8" | 3/16" | Chrome-Plated Steel | Plain | 7278A35 | 0000 | |
| 9/64" | 5/8" | 6 1/8" | 2 3/8" | 1/4" | Chrome-Plated Steel | Plain | 7278A36 | 0000 | |
| 5/32" | 5/8" | 6 1/8" | 2 3/8" | 1/4" | Chrome-Plated Steel | Plain | 7278A37 | 0000 | |
| 3/16" | 5/8" | 6 1/8" | 2 3/8" | 9/32" | Chrome-Plated Steel | Plain | 7278A38 | 0000 | |
| 7/32" | 3/4" | 6 3/4" | 2 3/8" | 5/16" | Chrome-Plated Steel | Plain | 7278A39 | 0000 | |
| 1/4" | 3/4" | 6 3/4" | 2 3/8" | 3/8" | Chrome-Plated Steel | Plain | 7278A41 | 0000 | |
| 1.5 mm | 1/8" | 5 1/2" | 2 7/16" | 1/8" | Chrome-Plated Steel | Plain | 52965A22 | 0000 | |
| 1.8 mm | 1/8" | 5 1/2" | 2 7/16" | 1/8" | Chrome-Plated Steel | Plain | 52965A23 | 0000 | |
| 2 mm | 3/16" | 5 1/2" | 2 7/16" | 5/32" | Chrome-Plated Steel | Plain | 52965A24 | 0000 | |
| 2.5 mm | 3/8" | 6 1/8" | 2 7/16" | 5/32" | Chrome-Plated Steel | Plain | 52965A11 | 0000 | |
| 3 mm | 5/8" | 6 1/8" | 2 7/16" | 3/16" | Chrome-Plated Steel | Plain | 52965A12 | 0000 | |
| 3.2 mm | 9/16" | 6 3/16" | 2 3/8" | 1/4" | Nickel-Plated Steel | Ultra Grip | 52965A25 | 0000 | |
| 3.5 mm | 5/8" | 6 1/8" | 2 7/16" | 1/4" | Chrome-Plated Steel | Plain | 52965A13 | 0000 | |
| 4 mm | 5/8" | 6 1/8" | 2 7/16" | 1/4" | Chrome-Plated Steel | Plain | 52965A14 | 0000 | |
| 4.5 mm | 5/8" | 6 1/8" | 2 7/16" | 9/32" | Chrome-Plated Steel | Plain | 52965A15 | 0000 | |
| 5 mm | 11/16" | 6 1/8" | 2 7/16" | 9/32" | Chrome-Plated Steel | Plain | 52965A16 | 0000 | |
| 5.5 mm | 11/16" | 6 3/4" | 2 7/16" | 5/16" | Chrome-Plated Steel | Plain | 52965A17 | 0000 | |
| 6 mm | 11/16" | 6 3/4" | 2 7/16" | 3/8" | Chrome-Plated Steel | Plain | 52965A18 | 0000 | |
Compact Nutdriver Sets
 | |
A scaled-down version of our standard nutdrivers, these are shorter and slimmer to fit in your toolkit. Sets include a secondary handle that slides over the drivers for extra comfort and torque.
Zinc-Plated Steel—Withstands occasional exposure to moisture.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Bolt Clearance | Material | Grip Style | Container Type | Each | ||
|---|---|---|---|---|---|---|---|---|
| 11 | 1/4" Nutdriver—3 1/2" O'all Lg. 1/8" Nutdriver—3 1/2" O'all Lg. 3/16" Nutdriver—3 1/2" O'all Lg. 3/32" Nutdriver—3 1/2" O'all Lg. 3/8" Nutdriver—3 1/2" O'all Lg. 5/16" Nutdriver—3 1/2" O'all Lg. 5/32" Nutdriver—3 1/2" O'all Lg. 7/32" Nutdriver—3 1/2" O'all Lg. 9/32" Nutdriver—3 1/2" O'all Lg. 11/32" Nutdriver—3 1/2" O'all Lg. Secondary Nutdriver Handle | 7/16" to 3/4" | Zinc-Plated Steel | Plain | Plastic Case | 7382A31 | 000000 |
Precise-Control Screwdriver Sets
No. of Pieces | Includes | Grip Style | Material | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
Phillips, Slotted, Hex, and Torx | ||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 | Plain | Chrome-Plated Steel | Metal Stand | 52985A94 | 0000000 | ||
Precise-Control Nutdriver Sets
 | |
Keep a selection of small nutdrivers on hand to adjust electronics and other delicate components. These give you better control than standard nutdrivers to avoid stripping tiny nuts or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the handle with your fingertips.
Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Bolt Clearance | Material | Grip Style | Each | ||
|---|---|---|---|---|---|---|---|
| 8 | 1/4" Nutdriver—6 3/4" O'all Lg. 1/8" Nutdriver—6 1/8" O'all Lg. 3/16" Nutdriver—6 1/8" O'all Lg. 3/32" Nutdriver—6 1/8" O'all Lg. 5/32" Nutdriver—6 1/8" O'all Lg. 7/32" Nutdriver—6 3/4" O'all Lg. 7/64" Nutdriver—6 1/8" O'all Lg. 9/64" Nutdriver—6 1/8" O'all Lg. | 3/8" to 3/4" | Chrome-Plated Steel | Plain | 7278A57 | 000000 | |
| 8 | 2.5 mm Nutdriver—6 1/8" O'all Lg. 3 mm Nutdriver—6 1/8" O'all Lg. 3.5 mm Nutdriver—6 1/8" O'all Lg. 4 mm Nutdriver—6 1/8" O'all Lg. 4.5 mm Nutdriver—6 1/8" O'all Lg. 5 mm Nutdriver—6 1/8" O'all Lg. 5.5 mm Nutdriver—6 3/4" O'all Lg. 6 mm Nutdriver—6 3/4" O'all Lg. | 3/8" to 11/16" | Chrome-Plated Steel | Plain | 52965A21 | 00000 |
Static-Control Precise-Control Screwdriver Sets
 |
Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
No. of Pieces | Includes | Grip Style | Material | Static Control Rating | Surface Resistivity | Specs. Met | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Phillips, Slotted, Hex, and Torx | |||||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4" Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 | Plain | Chrome-Plated Steel | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | Metal Stand | 7440A95 | 0000000 | ||
Static-Control Precise-Control Nutdrivers
 | |
Protect delicate electronics from harmful static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
Black-Oxide Steel—These nutdrivers withstand occasional moisture.
Plain Grip—Made of hard plastic for durability.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Static Control Rating | Surface Resistivity, ohm/sq. | Each | ||
| 5/64" | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A31 | 00000 | |
| 3/32" | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A42 | 0000 | |
| 7/64" | 1/4" | 6 1/4" | 2 1/2" | 3/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A43 | 0000 | |
| 1/8" | 1/2" | 6 1/4" | 2 1/2" | 3/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A44 | 0000 | |
| 5/32" | 1/2" | 6 1/4" | 2 1/2" | 1/4" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A45 | 00000 | |
| 3/16" | 1/2" | 6 1/4" | 2 1/2" | 9/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A46 | 00000 | |
| 7/32" | 1/2" | 6 1/4" | 2 1/2" | 5/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A47 | 00000 | |
| 1/4" | 1/2" | 6 1/4" | 2 1/2" | 3/8" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 7278A48 | 00000 | |
| 2 mm | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A31 | 0000 | |
| 2.2 mm | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A32 | 0000 | |
| 2.5 mm | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A33 | 0000 | |
| 3 mm | 1/2" | 6 1/4" | 2 1/2" | 3/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A34 | 00000 | |
| 4 mm | 1/2" | 6 1/4" | 2 1/2" | 1/4" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A36 | 00000 | |
| 4.5 mm | 1/2" | 6 1/4" | 2 1/2" | 9/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A37 | 00000 | |
| 5 mm | 1/2" | 6 1/4" | 2 1/2" | 5/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A38 | 00000 | |
| 5.5 mm | 1/2" | 6 1/4" | 2 1/2" | 5/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A39 | 00000 | |
| 6 mm | 1/2" | 6 1/4" | 2 1/2" | 3/8" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 52965A41 | 00000 | |
Static-Control Precise-Control Nutdriver Sets
 | |
Keep a collection of small nutdrivers on hand to protect delicate electronics from static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
Black-Oxide Steel—These nutdrivers withstand occasional moisture.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Bolt Clearance | Material | Grip Style | Static Control Rating | Surface Resistivity, ohm/sq. | Container Type | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 1/4" Nutdriver—6 1/4" O'all Lg. 1/8" Nutdriver—6 1/4" O'all Lg. 3/16" Nutdriver—6 1/4" O'all Lg. 3/32" Nutdriver—6 1/4" O'all Lg. 5/32" Nutdriver—6 1/4" O'all Lg. 5/64" Nutdriver—6 1/4" O'all Lg. 7/32" Nutdriver—6 1/4" O'all Lg. 7/64" Nutdriver—6 1/4" O'all Lg. | 1/4" to 1/2" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | Plastic Pouch | 7278A58 | 000000 | |
| 8 | 2 mm Nutdriver—6 1/4" O'all Lg. 2.2 mm Nutdriver—6 1/4" O'all Lg. 2.5 mm Nutdriver—6 1/4" O'all Lg. 3 mm Nutdriver—6 1/4" O'all Lg. 3.5 mm Nutdriver—6 1/4" O'all Lg. 4 mm Nutdriver—6 1/4" O'all Lg. 4.5 mm Nutdriver—6 1/4" O'all Lg. 5 mm Nutdriver—6 1/4" O'all Lg. | 1/4" to 1/2" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | Plastic Pouch | 52965A28 | 00000 |
Compact Nutdrivers
 |
|
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Each | ||
| 5/16" | 1 1/4" | 3 1/2" | 1 1/4" | 1/2" | Chrome-Plated Steel | Plain | 8358A34 | 00000 | |
Stubby Screwdriver/Nutdrivers
 |
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.
Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | For Bit Hex Shank Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Bit-Holding Mechanism | Mfr. | Each | |||
Premium | |||||||||||||
| 6 | Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" External Hex: 1/4", 5/16" | 1/4", 5/16" | Stubby | 3 3/8" | 1 1/4" | 17/32" | Steel | Ball Detent | Klein Tools | 6127A42 | 000000 | ||
