Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. They’re good for applications such as cutting aluminum bars to size or cutting bevels and angles into aluminum framing to make a window.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your saw.

Cut wood, plywood, and particleboard.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.

Spend less time on blade changes when cutting steel and stainless steel. Use these blades for applications such as cutting steel bars to size or cutting bevels and angles into stainless steel framing to make a window.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades. Sharpen them if they become dull.

With a large number of teeth, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. Use these blades on wood, plywood, and particleboard. They’re good for applications such as making long, accurate cuts on a sheet of plywood or cutting bevels and angles into wood framing to make a door or window.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.

A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.

Also known as rip blades, these steel blades have large, forward-angled, carbide-tipped teeth for making fast cuts with the wood grain (ripping).

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron. Use dry or with water or coolant (not included).

Use with water or coolant (not included) to produce smoother cuts in stone and ceramic tile than dry-cutting blades. They're also for use on glass.

A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile. These blades have multiple arbor diameters.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.

The edge of the blade is segmented to cut faster than a continuous edge. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete. Use dry or with water or coolant (not included).

For the blade with a round/diamond arbor, detach the center piece to expose the diamond shape.