Mop Sink Faucets | McMaster-Carr

Filter by

Mounting Location

Inlet Location

Inlet Hole Center-to-Center

Spout Type

For Number of Sink Faucet Holes

Inlet Pipe Size

Number of Inlets

Spout Length

Material

Relative Water Temperature

Flow Rate

Spout Outlet Connection

Pipe Size

Inlet Connection Port

Inlet Gender

Inlet Thread Type

Thread Type

REACH

Gender

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Spout Height

Performance

Fitting Connection

99 Products

High-Flow Double-Inlet Sink Faucets


Style A	Style B	Style C

Style D	Style E	Style F

Style G	Style H	Style J

Style K

Fill sinks and buckets quickly. These faucets have a flow rate of 7.5 gpm or higher—more than three times that of other faucets.

Bottom Inlet—Also known as deck-mount faucets, faucets with a bottom inlet mount on top of the sink. Faucets with a back/bottom inlet typically mount to the wall. They come with two 3/4" inlet elbows, so you can mount this faucet to a sink as well.

Back Inlet—Faucets with a back inlet mount to piping coming out of the wall. Faucets with a back/bottom inlet typically mount to the wall. They come with two 3/4" inlet elbows, so you can mount this faucet to a sink as well.

Styles B and C—Styles B and C have a _3/4" male GHT outlet, which is a standard garden hose connection and a backflow-prevention valve, which keeps liquid from flowing back into your water supply. They have handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.

Style D—Style D has handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.

Styles E and F—Styles E and F have a _3/4" male GHT outlet, which is a standard garden hose connection. They have handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.

Styles G and J—Styles G and J faucets have a double-jointed spout that can swing in two directions at once, so they’re easier to maneuver than spouts with a single joint. The second joint also adds height, so you can fill tall pots or wash large objects. have handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.

Styles H and K—Styles H and K have handles that are easy to turn, which helps them comply with ADA guidelines. To make sure these faucets can be accessed from a wheelchair, install them so the handles and spout are no more than 48" from the floor.

	Sink Faucets										Faucet Repair and Installation Kits		Replacement Hot Cartridges		Replacement Cold Cartridges		Replacement Hot/Cold Cartridges
		Inlet
	Style	Pipe Size	Thread Type	Gender	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.		Each		Each		Each		Each		Each
Back Inlet—Wall Mount







				Fixed Spout—Chrome-Plated Brass

				A	1/2	NPT	Female	14	2"	2	7 3/4" to 8 1/4"	2961K21	0000000	3773N11	000000	2961K4	000000	2346K44	000000	———	0


				B	1/2	NPT	Female	14	6 1/2"	2	7 3/4" to 8 1/4"	2961K32	000000	3773N11	00000	2961K4	00000	2346K44	00000	———	0
				C	1/2	NPT	Female	7.5	2 1/2"	2	3" to 8 3/8"	3081K45	000000	———	0	3081K51	00000	3081K52	00000	———	0




						Swivel Spout—Chrome-Plated Brass

						D	1/2	NPT	Female	23	5 3/4"	2	7 3/4" to 8 1/4"	2346K28	000000	2500K111	00000	2346K46	00000	2346K44	00000	———	0


						E	1/2	NPT	Female	14	6"	2	8"	2944K16	000000	2500K111	00000	2961K4	00000	2346K44	00000	———	0
						E	1/2	NPT	Male	14	6"	2	8"	2944K18	000000	2500K111	00000	2961K4	00000	2346K44	00000	———	0


						Bottom Inlet—Sink Mount







										Swivel Spout—Chrome-Plated Brass

										F	1/2	NPT	Male	12	8"	2	4"	29015K6	000000	2500K111	00000	2961K4	00000	2346K44	00000	———	0


										G	3/4	NPT	Female	43	24"	2	7 3/4" to 8 1/4"	29015K111	000000	———	0	———	0	———	0	2730K72	000000
										H	3/4	NPT	Female	44	18"	2	8"	29015K113	000000	———	0	———	0	———	0	2730K72	00000
										H	3/4	NPT	Female	48	24"	2	7 3/4" to 8 1/4"	29015K112	000000	———	0	———	0	———	0	2730K72	00000
										H	3/4	NPT	Male	44	14"	2	8"	29015K114	000000	———	0	———	0	———	0	2730K72	00000


										Back Inlet, Bottom Inlet—Wall Mount







														Swivel Spout—Chrome-Plated Brass

														J	3/4	NPT	Female	43	24"	2	7 3/4" to 8 1/4"	2730K111	000000	———	0	———	0	———	0	2730K72	00000


														K	3/4	NPT	Female	37.5	12"	2	7 3/4" to 8 1/4"	2730K51	000000	———	0	———	0	———	0	2730K72	00000
														K	3/4	NPT	Female	37.5	18"	2	7 3/4" to 8 1/4"	2730K55	000000	———	0	———	0	———	0	2730K72	00000

Washdown Sprayers


Style A	Style A	Style B


1 Bottom Inlet	2 Bottom Inlets	2 Back Inlets

Often used for industrial parts washing and food service applications, these flexible sprayers shoot a concentrated jet of water to blast away dirt and grease. They meet NSF/ANSI 61 standards for drinking water.

Style B—Style B sprayers are best when clearance is a concern, such as mounting them under shelves.

1 Inlet—Faucets with one inlet come with everything required to install including hot and cold water supply hoses.

2 Inlets—Faucets with two inlets require an installation kit and two supply hoses (sold separately). Installation kits include the fittings required to connect to the supply hoses.

	Washdown Sprayers												Installation Kits		Supply Hoses		Replacement Springs
		Inlets
	Style	No. of	Pipe Size	Thread Type	Hole Ctr.-to-Ctr.	For Tube OD	Connection	Flow Rate, gpm	Ht.	Hose Lg.		Each		Each		Each		Each
Bottom Inlet—Chrome-Plated Brass with Stainless Steel Hose Cover







				Sink Mount

				A	1	—	—	—	5/8"	Compression	1.1	46 1/2"	44"	2963K1	0000000	———	0	———	0	2686K213	000000


				A	2	1/2	NPT	8"	—	—	1.1	42"	44"	2963K2	000000	3773N13	000000	2857K313	00000	2686K213	00000
				B	2	1/2	NPT	8"	—	—	1.1	16 1/8"	14 3/8"	2686K101	000000	3773N13	00000	2857K313	0000	———	0


				Back Inlet—Chrome-Plated Brass with Stainless Steel Hose Cover







								Wall Mount

								A	2	1/2	NPT	8"	—	—	1.1	34 1/2"	44"	2963K3	000000	3773N11	00000	2857K313	0000	2686K213	00000


								B	2	1/2	NPT	8"	—	—	1.1	13 3/8"	20"	2963K111	000000	3773N11	00000	2857K313	0000	———	0

Accessories and Replacements for Washdown Sprayers

			Spout Outlet
Chrome-Plated Brass


6"	9.7	3/8	NPT	Female	2686K102	0000000
12"	8.9	3/8	NPT	Female	3065K12	000000
18"	8.9	3/8	NPT	Female	3065K13	000000

Nozzles, Nozzle Repair Kits, Replacement Washdown Sprayers and Other Products

Push-Button Spray Head (2.2 gpm)—Push-button spray heads turn on with a push from your thumb, rather than gripping a lever handle. They spray in a shower pattern.

Easy-Trigger Spray Head (1.4 gpm)—Easy-trigger spray heads have a handle that’s easy to press to start the flow of water. Lock the handle in place one-handed to keep water flowing constantly.

		Each
Push-Button Spray Head (2.2 gpm)	2686K103	0000000
Spray Head Maintenance Kit for 1.1 gpm Spray Head	2686K21	00000
1.1 gpm Flow Rate Spray Head	2686K111	000000
Spray Face for 1.1 gpm Spray Head	2686K105	0000
Handle for 1.1 gpm Spray Head	2686K25	00000
44" Hose with Spray Head	2686K13	000000
Easy-Trigger Spray Head (1.4 gpm)	2686K17	000000
Wall Bracket for Style A	2686K23	00000
44" Hose	2686K15	00000
20" Hose	2686K104	00000

Double-Inlet Sink Faucets


Style A	Style J	Style K

Style L (Shown with Sprayer)	Style N

Back Inlet—Wall Mount

Style A

Swivel Spout—Swivel faucets are often used with wide or double-bowl sinks.

Style A—Style A has a jointed spout to access triple-bowl sinks. It meets NSF/ANSI 61 for drinking water.

Cannot Be Sold To—Faucets that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

	Sink Faucets											Replacement Hot Cartridges		Replacement Cold Cartridges
		Inlet
	Style	Pipe Size	Thread Type	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.	Includes	Cannot Be Sold To		Each		Each		Each
Swivel Spout—Chrome-Plated Brass (Meets NSF/ANSI 61)



		A	1/2	NPT	2.2	13"	2	3" to 8 3/8"	Aerator	California, Colorado, District of Columbia, Hawaii, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Washington	2924K14	0000000	3081K51	000000	3081K52	000000


		A	1/2	NPT	2.2	18"	2	3" to 8 3/8"	Aerator	California, Colorado, District of Columbia, Hawaii, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Washington	2924K19	000000	3081K51	00000	3081K52	00000

Bottom Inlet—Sink Mount


Style J	Style K	Style L (Shown with Sprayer)

Swivel Spout—Swivel faucets are often used with wide or double-bowl sinks.

Styles J-L—Styles B, C, D, F, G, J, K, and L help comply with ADA when properly installed. They meet NSF/ANSI 61 for drinking water.

	Sink Faucets										Replacement Hot Cartridges		Replacement Cold Cartridges		Replacement Hot/Cold Cartridges
		Inlet
	Style	Pipe Size	Thread Type	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.	Includes		Each		Each		Each		Each
Swivel Spout—Chrome-Plated Brass (Meets NSF/ANSI 61)



		J	1/2	NPT	2.2	9 1/4"	3	8"	Aerator	2976K11	000000	———	0	———	0	2976K23	000000


		L	1/2	NPT	1.2	8"	2	8"	Aerator	2959K31	000000	2959K131	000000	2959K132	000000	———	0
		L	1/2	NPT	1.2	8"	4	8"	Aerator, Extendable Faucet Sprayer	2959K32	000000	2959K131	00000	2959K132	00000	———	0


		Swivel Spout—Chrome-Plated Metal (Meets NSF/ANSI 61)



				K	1/2	NPS	1.5	9 9/16"	4	8"	Aerator, Extendable Faucet Sprayer	2976K12	000000	———	0	———	0	2976K23	00000

Top Inlet—Sink Mount

Style N

Swivel Spout—Swivel faucets are often used with wide or double-bowl sinks.

Style N—Style N has a _3/4" male GHT outlet which is a standard garden hose connection. The inlet is NPSF, which is also known as Dryseal.

	Sink Faucets									Replacement Hot Cartridges		Replacement Cold Cartridges
		Inlet
	Style	Pipe Size	Thread Type	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.		Each		Each		Each
Swivel Spout—Brass



		N	1/2	NPSF	6.7	6"	0	3 1/2"	2951K31	000000	2951K38	000000	2951K39	000000

Faucet Spouts


Style A	Style B	Style C	Style D

Add a faucet to your supply line for access to water. To turn these on and off, you'll need sink faucet pedals .

Styles A and B—Styles A and B meet NSF/ANSI 61, so they’re safe to use with drinking water systems.

Style C—Style C have a built-in vacuum breaker, which helps with back-flow prevention. They’re often used in laboratories because the vacuum breaker reduces the risk of contaminating public water lines with harsh chemicals. Style C can be installed to not swivel.

Style D—Style D meet NSF/ANSI 61, so it's safe to use with drinking water systems. Style D can be installed to not swivel.

		Inlet				Spout
	Style	Pipe Size	Thread Type	Gender	Flow Rate, gpm	Lg.	Ht.	Food Industry Std.	Includes		Each
Back Inlet—Wall Mount







				Swivel Spout—Chrome-Plated Brass

				A	3/8	NPT	Female	10.2	5 3/4"	10 3/4"	NSF/ANSI 372, NSF/ANSI 61	Aerator	3046K37	0000000


				B	3/8	NPT	Female	10.2	12"	7 1/2"	NSF/ANSI 372, NSF/ANSI 61	Aerator	3046K52	000000


				Bottom Inlet—Sink Mount







								Fixed or Swivel Spout—Chrome-Plated Brass

								C	3/8	NPT	Male	3.7	6"	12 3/8"	—	—	3046K51	000000


								D	1/2	NPT	Male	2.2	5 1/4"	10 3/4"	NSF/ANSI 372, NSF/ANSI 61	Aerator	3046K26	000000

Extra-Clearance Double-Inlet Sink Faucets


Style A (Barbed Spout Outlet)	Style B (Barbed Spout Outlet)	Style C (Barbed Spout Outlet)

Style D	Style E

The tall, narrow spout on these gooseneck faucets provides more space for filling bottles, beakers, flasks, and other laboratory accessories.

Back Inlet—Wall Mount

Style A (Barbed

Spout Outlet)

Aerator—Faucets with an aerator provide a smooth, powerful spray.

Faucet Repair and Installation Kits—Installation kits contain two nuts, two washers, and two _1/2 NPT male brass elbows.

	Sink Faucets												Faucet Repair and Installation Kits		Replacement Hot Cartridges
		Inlet			Spout
	Style	Pipe Size	Thread Type	Flow Rate, gpm	Lg.	Ht.	Outlet Connection	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.	Includes		Each		Each		Each
Swivel Spout—Chrome-Plated Brass



		A	1/2	NPT	2.2	5 3/4"	16 1/4"	—	2	2 3/4" to 3 1/4"	Aerator	2957K2	0000000	3773N11	000000	2346K46	000000


		A	1/2	NPT	3.8	5 3/4"	16 1/4"	Barbed	2	2 3/4" to 3 1/4"	—	2957K4	000000	3773N11	00000	2346K46	00000

Bottom Inlet—Sink Mount


Style B (Barbed Spout Outlet)	Style C (Barbed Spout Outlet)	Style D	Style E

Style C—Style C has a backflow-prevention valve, which keeps liquid from flowing back into your water supply.

Styles D and E—Styles D and E help comply with ADA when properly installed and can be installed not to swivel. They cannot be sold to the regions listed due to local energy efficiency requirements.

Aerator—Faucets with an aerator provide a smooth, powerful spray.

Cannot Be Sold To—Faucets that cannot be sold to the regions listed are restricted by local energy efficiency requirements.

	Sink Faucets															Replacement Hot Cartridges		Replacement Cold Cartridges
		Inlet			Spout
	Style	Pipe Size	Thread Type	Flow Rate, gpm	Lg.	Ht.	Outlet Connection	For No. of Sink Faucet Holes	Inlet Hole Ctr.-to-Ctr.	Features	Food Industry Std.	Includes	Cannot Be Sold To		Each		Each		Each
Fixed Spout—Chrome-Plated Brass



		B	1/2	NPT	2.2	5 3/4"	13 1/2"	—	2	7 3/4" to 8 1/4"	—	—	Aerator	—	2403K63	0000000	2346K46	000000	———	0


		B	1/2	NPT	3.8	5 3/4"	13 1/2"	Barbed	2	7 3/4" to 8 1/4"	—	—	—	—	2403K64	000000	2346K46	00000	———	0
		C	1/2	NPT	2.2	5 1/2"	12"	—	2	7 3/4" to 8 1/4"	Backflow-Prevention Valve	—	Aerator	—	2403K65	000000	2346K46	00000	———	0
		C	1/2	NPT	3.8	5 1/2"	12"	Barbed	2	7 3/4" to 8 1/4"	Backflow-Prevention Valve	—	—	—	2403K66	000000	2346K46	00000	———	0


		Swivel or Fixed Spout—Chrome-Plated Brass



				D	1/2	NPS	2.2	3 1/2"	9 3/4"	—	2	4"	—	NSF/ANSI 61, NSF/ANSI 372	Aerator	California, Colorado, District of Columbia, Hawaii, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Washington	3050K41	000000	3081K51	00000	3081K52	000000


				E	1/2	NPS	2.2	5 1/4"	11 3/4"	—	3	8"	—	NSF/ANSI 61, NSF/ANSI 372	Aerator	California, Colorado, District of Columbia, Hawaii, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Washington	3104K68	000000	3104K61	00000	3104K62	00000

Single-Inlet Sink Faucets

Back Inlet—Wall Mount


Style A	Style B	Style C

				Inlet			Spout
	Style	For Relative Water Temp.	No. of Faucet Supply Lines	Pipe Size	Thread Type	Flow Rate, gpm	Lg.	Outlet Connection	For No. of Sink Faucet Holes		Each
Fixed Spout—Acetal



		A	Hot, Cold	1	1/2	NPT	Not Rated	4 1/8"	Threaded	1	4950K71	00000


		A	Hot, Cold	1	3/4	NPT	Not Rated	4 1/8"	Threaded	1	4950K72	0000


		Fixed Spout—Brass



				B	Hot, Cold	1	1/2	NPT	7	3 3/4"	Threaded	1	2947K4	00000


				B	Hot, Cold	1	3/4	NPT	7	3 3/4"	Threaded	1	2947K5	00000


				Fixed Spout—Chrome-Plated Brass



						C	Cold	1	1/2	NPT	5.4	4"	Threaded	1	2947K6	000000

Bottom Inlet—Sink Mount


Style E	Style F	Style G (Shown with Barbed Spout Outlet)	Style H (Shown with Barbed Spout Outlet)

Style J (Shown with Barbed Spout Outlet)	Style K	Style L	Style M

Style N (Shown with Sprayer)	Style P (Shown with Sprayer)

Swivel Spout—Swivel faucets are often used with wide or double-bowl sinks.

Style F—Style F can also be used with deionized and demineralized water. Those with automatic shut-off prevent wasted water by stopping the flow of water when the handle is released.

Style J—Style J have a backflow-prevention valve, which keeps liquid from flowing back into your water supply.

Styles K, L, N, and P—Styles K, L, N, and P help you comply with ADA standards because the handles turn with only a little bit of effort. Install them so they’re no more than 48" off the ground to make sure they’re wheelchair accessible. They are easy to turn on with the back of a hand or elbow, so you don’t dirty the handles.

Style M—Style M helps you comply with ADA standards because the handles turn with only a little bit of effort. Install them so they’re no more than 48" off the ground to make sure they’re wheelchair accessible. It meets NSF/ANSI 61, so they’re safe to use with drinking water. It is easy to turn on with the back of a hand or elbow, so you don’t dirty the handles.

Automatic Shutoff—Those with automatic shut-off prevent wasted water by stopping the flow of water when the handle is released.

Aerator—Faucets with an aerator provide a smooth, powerful spray.

Extendable Faucet Sprayer—Faucets with an extendable faucet sprayer make it easy to rinse hard-to-reach areas. The one on Style M pulls down directly from the spout.

	Sink Faucets																Replacement Hot/Cold Cartridges
				Inlet					Spout
	Style	For Relative Water Temp.	No. of Faucet Supply Lines	Pipe Size	Thread Type	For Tube OD	Connection	Flow Rate, gpm	Lg.	Ht.	Outlet Connection	For No. of Sink Faucet Holes	Features	Includes		Each		Each
Fixed Spout—Chrome-Plated Brass



		E	Hot, Cold	1	1/2	NPT	—	—	3.8	5 3/4"	14 1/4"	Barbed	1	—	1/4 NPT Male Adapter	2842K51	0000000	———	0


		Fixed Spout—PVC



				F	Hot, Cold	1	3/8	NPT	—	—	3.8	6 1/4"	14"	Barbed	1	—	—	2859K12	000000	2859K14	000000


				F	Hot, Cold	1	3/8	NPT	—	—	3.8	6 1/4"	14"	Barbed	1	Automatic Shutoff	—	2859K13	000000	———	0


				Swivel or Fixed Spout—Chrome-Plated Brass



						G	Cold	1	1/4	NPT	—	—	3.3	6"	12 3/4"	—	1	—	Aerator	2952K392	000000	2952K42	00000


						G	Cold	1	1/4	NPT	—	—	3.3	6"	12 3/4"	Barbed	1	—	—	2952K745	000000	2952K42	00000
						H	Hot/Cold	2	—	—	3/8"	Compression	2.7	6"	12 3/4"	—	1	—	Aerator	2952K173	000000	2952K42	00000
						H	Hot/Cold	2	—	—	3/8"	Compression	2.7	6"	12 3/4"	Barbed	1	—	—	2952K167	000000	2952K42	00000
						J	Hot/Cold	2	—	—	3/8"	Compression	2.7	6"	13 1/2"	—	1	Backflow-Prevention Valve	Aerator	2952K305	000000	2952K42	00000
						J	Hot/Cold	2	—	—	3/8"	Compression	2.7	6"	13 1/2"	Barbed	1	Backflow-Prevention Valve	—	2952K203	000000	2952K42	00000
						K	Hot/Cold	2	—	—	3/8"	Compression	0.5	5 3/8"	13 3/8"	—	1	—	—	2198K112	000000	———	0
						L	Hot, Cold	1	1/2	NPS	—	—	0.5	3 1/2"	11 1/2"	—	1	—	—	2198K113	000000	———	0


						Swivel Spout—Chrome-Plated Brass



								M	Hot/Cold	2	—	—	3/8"	Compression	1.5	8 1/4"	17"	—	1	—	Extendable Faucet Sprayer	2198K111	000000	2633K163	00000


								N	Hot/Cold	2	—	—	3/8"	Compression	1.5	9"	—	—	1	—	Aerator	2941K11	00000	2941K38	00000
								N	Hot/Cold	2	—	—	3/8"	Compression	1.5	9"	—	—	2	—	Aerator, Extendable Faucet Sprayer	2941K12	000000	2941K38	00000
								P	Hot/Cold	2	—	—	3/8"	Compression	1.5	8 3/4"	—	—	1	—	Aerator	2198K21	000000	2198K43	00000
								P	Hot/Cold	2	—	—	3/8"	Compression	1.5	8 3/4"	—	—	2	—	Aerator, Extendable Faucet Sprayer	2198K31	000000	2198K43	00000

Automatic Shutoff Sink Faucets

Style E

Prevent wasted water with these faucets that shut off when the handle is released.

	Sink Faucets											Replacement Hot Cartridges		Replacement Hot/Cold Cartridges
			Inlet
	Style	For Relative Water Temp.	No. of	Pipe Size	Thread Type	Gender	Flow Rate, gpm	Spout Lg.	For No. of Sink Faucet Holes		Each		Each		Each
Wall Mount/Back Inlet—Immediate Shut-Off







				Chrome-Plated Brass

				E	Hot	1	1/2	NPT	Male	4.8	4"	1	2945K1	0000000	2945K22	0000000	———	0


				E	Cold	1	1/2	NPT	Male	4.8	4"	1	2945K2	000000	———	0	2945K11	0000000