Adapters for Morse Taper Drill Chuck Arbors


If your Morse taper arbor is too small or large for your machine spindle, insert it into one of these adapters. Also known as sleeves or shell sockets.
For technical drawings and 3-D models, click on a part number.
For Machine Spindle Morse Taper | For Arbor Shank Morse Taper | ||||||
---|---|---|---|---|---|---|---|
Number | Dia. | Number | Dia. | Overall Lg. | Material | Each | |
2 | 0.7" | 1 | 0.475" | 3 5/8" | Steel | 0000000 | 000000 |
3 | 0.938" | 1 | 0.475" | 3 7/8" | Steel | 0000000 | 00000 |
3 | 0.938" | 2 | 0.7" | 4 3/8" | Steel | 0000000 | 00000 |
4 | 1.231" | 1 | 0.475" | 4 7/8" | Steel | 0000000 | 00000 |
4 | 1.231" | 2 | 0.7" | 4 7/8" | Steel | 0000000 | 00000 |
4 | 1.231" | 3 | 0.938" | 5 1/2" | Steel | 0000000 | 00000 |
5 | 1.748" | 2 | 0.7" | 6 1/8" | Steel | 0000000 | 00000 |
5 | 1.748" | 3 | 0.938" | 6 1/8" | Steel | 0000000 | 00000 |
5 | 1.748" | 4 | 1.231" | 6 11/16" | Steel | 0000000 | 00000 |
6 | 2.494" | 4 | 1.231" | 8 9/16" | Steel | 0000000 | 000000 |
6 | 2.494" | 5 | 1.748" | 8 9/16" | Steel | 0000000 | 000000 |
Morse Taper to Jacobs Taper Drill Chuck Arbors

The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck. Morse taper spindles are most often found on drill presses. These arbors are made of hardened, precision-ground steel.
For technical drawings and 3-D models, click on a part number.
For Machine Spindle Morse Taper | For Drill Chuck Jacobs Taper | ||||||
---|---|---|---|---|---|---|---|
Number | Dia. | Number | Dia. | Overall Lg. | Material | Each | |
1 | 0.475" | 0 | 0.25" | 3 3/16" | Steel | 0000000 | 000000 |
1 | 0.475" | 1 | 0.384" | 3 25/64" | Steel | 0000000 | 00000 |
1 | 0.475" | 2 | 0.559" | 3 5/8" | Steel | 0000000 | 00000 |
1 | 0.475" | 3 | 0.811" | 4 1/64" | Steel | 0000000 | 00000 |
1 | 0.475" | 6 | 0.676" | 3 25/32" | Steel | 0000000 | 00000 |
1 | 0.475" | 33 | 0.624" | 3 25/32" | Steel | 0000000 | 00000 |
2 | 0.7" | 0 | 0.25" | 3 25/32" | Steel | 0000000 | 00000 |
2 | 0.7" | 1 | 0.384" | 3 63/64" | Steel | 0000000 | 00000 |
2 | 0.7" | 2 | 0.559" | 4 7/32" | Steel | 0000000 | 00000 |
2 | 0.7" | 3 | 0.811" | 4 39/64" | Steel | 0000000 | 00000 |
2 | 0.7" | 4 | 1.124" | 5 3/64" | Steel | 0000000 | 00000 |
2 | 0.7" | 6 | 0.676" | 4 3/8" | Steel | 0000000 | 00000 |
2 | 0.7" | 33 | 0.624" | 4 17/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 1 | 0.384" | 4 47/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 2 | 0.559" | 4 31/32" | Steel | 0000000 | 00000 |
3 | 0.938" | 3 | 0.811" | 5 23/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 4 | 1.124" | 5 51/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 5 | 1.413" | 5 29/32" | Steel | 0000000 | 00000 |
3 | 0.938" | 6 | 0.676" | 5 1/8" | Steel | 0000000 | 00000 |
3 | 0.938" | 33 | 0.624" | 5 1/8" | Steel | 0000000 | 00000 |
4 | 1.231" | 2 | 0.559" | 6" | Steel | 0000000 | 00000 |
4 | 1.231" | 3 | 0.811" | 6 3/8" | Steel | 0000000 | 00000 |
4 | 1.231" | 4 | 1.124" | 6 13/16" | Steel | 0000000 | 00000 |
4 | 1.231" | 5 | 1.413" | 6 15/16" | Steel | 0000000 | 00000 |
4 | 1.231" | 6 | 0.676" | 6 5/32" | Steel | 0000000 | 00000 |
4 | 1.231" | 33 | 0.624" | 6 5/32" | Steel | 0000000 | 00000 |
5 | 1.748" | 3 | 0.811" | 7 9/16" | Steel | 0000000 | 00000 |
5 | 1.748" | 4 | 1.124" | 8 1/8" | Steel | 0000000 | 00000 |
5 | 1.748" | 5 | 1.413" | 8 1/8" | Steel | 0000000 | 000000 |
Extensions for Morse Taper Drill Chuck Arbors


Insert your Morse taper arbor into one of these extensions to get additional reach.
For technical drawings and 3-D models, click on a part number.
For Machine Spindle Morse Taper | For Arbor Shank Morse Taper | ||||||
---|---|---|---|---|---|---|---|
Number | Dia. | Number | Dia. | Overall Lg. | Material | Each | |
2 | 0.7" | 2 | 0.7" | 6 57/64" | Steel | 0000000 | 000000 |
2 | 0.7" | 3 | 0.938" | 7 23/32" | Steel | 0000000 | 00000 |
3 | 0.938" | 2 | 0.7" | 7 41/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 3 | 0.938" | 8 29/64" | Steel | 0000000 | 00000 |
3 | 0.938" | 4 | 1.231" | 9 7/16" | Steel | 0000000 | 000000 |
4 | 1.231" | 3 | 0.938" | 9 29/64" | Steel | 0000000 | 00000 |
4 | 1.231" | 4 | 1.231" | 10 7/16" | Steel | 0000000 | 000000 |
4 | 1.231" | 5 | 1.748" | 11 13/16" | Steel | 0000000 | 000000 |
5 | 1.748" | 4 | 1.231" | 11 13/16" | Steel | 0000000 | 000000 |
5 | 1.748" | 5 | 1.748" | 13 3/16" | Steel | 0000000 | 000000 |
Machinable-End Morse Taper Drill Chuck Arbors

One end is made of soft steel that can be machined to suit your job requirements; the Morse taper end fits into a machine spindle. Morse taper spindles are most often found on drill presses.
For Machine Spindle Morse Taper | Machine End | ||||||
---|---|---|---|---|---|---|---|
Number | Dia. | Body Dia. | Body Lg. | Overall Lg. | Material | Each | |
2 | 0.7" | 1 3/4" | 2 1/8" | 5 1/16" | 1144 Carbon Steel | 0000000 | 000000 |
3 | 0.938" | 1 3/4" | 2 1/8" | 5 3/16" | 1144 Carbon Steel | 0000000 | 00000 |
4 | 1.231" | 2 1/2" | 3" | 7 5/8" | 1144 Carbon Steel | 0000000 | 00000 |
5 | 1.748" | 3" | 4 1/16" | 9 15/16" | 1144 Carbon Steel | 0000000 | 000000 |
Morse Taper Arbors with Drill Chuck

This arbor with chuck allows drills with a #3 Morse taper spindle to accept standard drill bits.
For Bit Shank Size | For Machine Spindle Morse Taper | Chuck Key | Arbor | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | mm | Number | Dia. | Chuck Material | Number | Material | Length | Included | Lg. | Included | Each | |
3/16"-3/4" | 4.5-19 | 3 | 0.938" | Steel | K4 | Steel | 5 3/32" | Yes | 5 1/2" | Yes | 0000000 | 0000000 |
Morse Taper to Thread-Mount Drill Chuck Arbors

The Morse taper end fits into a machine spindle and the threaded end is compatible with a threaded drill chuck. Morse taper spindles are most often found on drill presses. These arbors are made of hardened, precision-ground steel.
For technical drawings and 3-D models, click on a part number.
Arbor Adapters for Hollow-Core Cutters

Morse Taper
Shank
Pair these arbor adapters with hollow-core cutters when using a manual drill press or milling machine. Hollow-core cutters are also known as annular cutters.
For technical drawings and 3-D models, click on a part number.
Arbor Adapters for Milwaukee Hollow-Core Cutters

Morse Taper
Shank
These arbor adapters are required when using Milwaukee hollow-core cutters, also known as annular cutters. They come with a pilot pin, which aligns the cutter and ejects the slug.
Morse Taper | For Bit Shank | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Number | Dia. | Thread Size | Thread Pitch | Overall Lg. | For Cutter Material | Material | Manufacturer | Manufacturer Model Number | For Manufacturer Model Number | Includes | Each | |
With Morse Taper Shank | ||||||||||||
3 | 0.938" | M18 | 1.5mm | 10" | Carbide-Tipped Steel | Steel | Milwaukee | 49-57-0010 | 4202, 4208-1, 4209-1, 4292-1, 4297-1 | Oil Hose, Oiler, Pilot Pin | 00000000 | 0000000 |
Morse Taper to R8 Taper Milling Machine Adapters

Convert tools with a Morse taper shank to an R8 shank for use in manual milling machines that have an R8 taper spindle. Holders are ground to accurate size.
Tap Holders for Drill Presses and Milling Machines


Also known as tap chucks, these fit into machines that have a Morse taper spindle.
For technical drawings and 3-D models, click on a part number.
For Tap Size | For Tap Pipe Size | Material | Each | |
Morse Taper 2 | ||||
---|---|---|---|---|
__ | 1/8 | Black-Oxide Steel | 0000000 | 000000 |
1/4", M6, M6.3 | __ | Black-Oxide Steel | 0000000 | 00000 |
5/16", M7, M8 | __ | Black-Oxide Steel | 0000000 | 00000 |
3/8", M10 | __ | Black-Oxide Steel | 0000000 | 00000 |
7/16" | __ | Black-Oxide Steel | 0000000 | 00000 |
1/2", M12, M12.5 | __ | Black-Oxide Steel | 0000000 | 00000 |
9/16", M14 | __ | Black-Oxide Steel | 0000000 | 00000 |
5/8", M16 | __ | Black-Oxide Steel | 0000000 | 00000 |
Morse Taper 3 | ||||
__ | 1/4 | Black-Oxide Steel | 0000000 | 00000 |
1/2", M12, M12.5 | __ | Black-Oxide Steel | 0000000 | 00000 |
5/8", M16 | __ | Black-Oxide Steel | 0000000 | 00000 |
3/4" | __ | Black-Oxide Steel | 0000000 | 00000 |
7/8", M22 | __ | Black-Oxide Steel | 0000000 | 00000 |
Morse Taper 4 | ||||
__ | 1/2 | Black-Oxide Steel | 0000000 | 00000 |
__ | 3/8 | Black-Oxide Steel | 0000000 | 00000 |
__ | 3/4 | Black-Oxide Steel | 0000000 | 00000 |
3/4" | __ | Black-Oxide Steel | 0000000 | 00000 |
7/8", M22 | __ | Black-Oxide Steel | 0000000 | 00000 |
1", M25 | __ | Black-Oxide Steel | 0000000 | 00000 |