Filter by
System of Measurement
Input Voltage
Motor Reversing Capability
Certification
Output Frequency
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Enclosed DC Motor Drives
 |
Housed in a durable steel enclosure, these drives convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
Heat Sinks—A heat sink (sold separately) is required with outputs greater than 5 amps.
Drives | Heat Sinks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp (Input Voltage/Output Voltage) | Current, amp | Ht. | Wd. | Wire Connection | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | Each | ||||
Single-Phase Input | ||||||||||||||||
Nonreversing Motor | ||||||||||||||||
| 1/8 to 1 (115V AC/0V DC to 90V DC) 1/4 to 2 (230V AC/0V DC to 180V DC) | 10 | 8" | 6" | Screw Terminal | Yes | 0.19" (3) | On/Off Switch | Indoor Only | NEMA 1 | C-UL Listed, UL Listed | 7793K51 | 0000000 | 7793K55 | 0000000 | ||
VFDs
 |
Set these VFDs to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
Output | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Input Voltage, V AC | Current, amp | Voltage, V AC | Freq., Hz | Input Analog Signal | Ht. | Wd. | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | |||
Single-Phase Input | |||||||||||||||||
Reversing Motor | |||||||||||||||||
| 1 | 115/230 | 4.2 | 0 to 230 | 0 to 500 | 0 to 10V DC, 4 to 20 mA | 7.5" | 3.9" | No | 0.22" (4) | — | Wet, Indoor Only | NEMA 1, IP31 | UL Listed C-UL Listed CE Marked | 7786K49 | 0000000 | ||
| 2 | 200 to 240 | 7.3 | 230 | 0 to 120 | 0 to 10V DC, 4 to 20 mA | 7.5" | 3" | Yes | 0.2" (4) | Thermal Overload Protection | Indoor Only | NEMA 1, IP20 | UL Listed C-UL Listed CE Marked | 7786K431 | 000000 | ||
| 3 | 200 to 240 | 10 | 0 to 230 | 0 to 500 | 0 to 10V DC, 4 to 20 mA | 7.9" | 4" | No | 0.22" (4) | — | Indoor Only | NEMA 1, IP20 | UL Listed C-UL Listed CE Marked | 7786K221 | 000000 | ||
Single-Phase Input/Three-Phase Input | |||||||||||||||||
Reversing Motor | |||||||||||||||||
| 2 | 200 to 240 | 7.3 | 0 to 230 | 0 to 500 | 0 to 10V DC, 4 to 20 mA | 7.9" | 4" | No | 0.22" (4) | — | Indoor Only | NEMA 1, IP20 | UL Listed C-UL Listed CE Marked | 7786K241 | 000000 | ||
DIN-Rail Mount VFDs
 |
Mount these VFDs to DIN rail inside a control panel. Set them to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
Output | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Input Voltage, V AC | Current, amp | Voltage, V AC | Freq., Hz | Input Analog Signal | Ht. | Wd. | For DIN Rail Ht., mm | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Certification | Each | |||
Single-Phase Input | ||||||||||||||||
Reversing Motor | ||||||||||||||||
| 1/2 | 100 to 120 | 3 | 115 | 0 to 400 | 0 to 10V DC, 4 to 20 mA | 5.98" | 2.83" | 35 | No | 0.2" (2) | Thermal Overload Protection | UL Listed C-UL Listed CE Marked | 7786K651 | 0000000 | ||
| 1 | 100 to 120 | 4.8 | 115 | 0 to 400 | 0 to 10V DC, 4 to 20 mA | 8.66" | 4.29" | 35 | No | 0.22" (2) | Thermal Overload Protection | UL Listed C-UL Listed CE Marked | 7786K652 | 000000 | ||
| 1 | 200 to 240 | 4.8 | 230 | 0 to 400 | 0 to 10V DC, 4 to 20 mA | 5.98" | 2.83" | 35 | No | 0.2" (2) | Thermal Overload Protection | UL Listed C-UL Listed CE Marked | 7786K658 | 000000 | ||
| 2 | 200 to 240 | 7.8 | 230 | 0 to 400 | 0 to 10V DC, 4 to 20 mA | 8.66" | 4.29" | 35 | No | 0.2" (2) | Thermal Overload Protection | UL Listed C-UL Listed CE Marked | 7786K655 | 000000 | ||
| 3 | 200 to 240 | 11 | 230 | 0 to 400 | 0 to 10V DC, 4 to 20 mA | 8.66" | 4.29" | 35 | No | 0.22" (2) | Thermal Overload Protection | UL Listed C-UL Listed CE Marked | 7786K656 | 000000 | ||
Reversing Enclosed DC Motor Drives
 |
Use these drives with motors that run forward and backward, such as motors for conveyor belts. They convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors. Housed in a durable steel enclosure.
Heat Sinks—A heat sink (sold separately) is required with outputs greater than 5 amps.
Drives | Heat Sinks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp (Input Voltage/Output Voltage) | Current, amp | Ht. | Wd. | Wire Connection | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | Each | ||||
Single-Phase Input | ||||||||||||||||
Reversing Motor | ||||||||||||||||
| 1/8 to 1 (115V AC/0V DC to 90V DC) 1/4 to 2 (230V AC/0V DC to 180V DC) | 10 | 8" | 6" | Screw Terminal | Yes | 0.19" (3) | On/Off Switch | Indoor Only | NEMA 1 | C-UL Listed, UL Listed | 7793K52 | 0000000 | 7793K55 | 0000000 | ||
DC Motor Drives
 |
Convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
Heat Sinks—A heat sink (sold separately) is required with outputs greater than 5 amps.
Drives | Heat Sinks | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp (Input Voltage/Output Voltage) | Current, amp | Ht. | Wd. | Wire Connection | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Certification | Each | Each | ||||
Single-Phase Input | |||||||||||||
Nonreversing Motor | |||||||||||||
| 1/8 to 1 (115V AC/0V DC to 90V DC) 1/4 to 2 (230V AC/0V DC to 180V DC) | 10 | 3.6" | 4.3" | Screw Terminal | Yes | 0.19" (6) | C-UL Listed, UL Listed | 7793K12 | 0000000 | 7793K65 | 000000 | ||
Washdown DC Motor Drives
 |
A NEMA 4X rated enclosure protects these drives from corrosion and washdowns. They convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
Power, hp (Input Voltage/Output Voltage) | Current, amp | Ht. | Wd. | Wire Connection | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Single-Phase Input | ||||||||||||||
Nonreversing Motor | ||||||||||||||
| 1/8 to 1 (115V AC/0V DC to 90V DC) 1/4 to 2 (230V AC/0V DC to 180V DC) | 10 | 7.5" | 5.63" | Screw Terminal | Yes | 0.19" (4) | On/Off Switch | Corrosive, Dusty, Outdoor, Washdown, Wet | NEMA 4X | C-UL Listed, UL Listed | 7793K63 | 0000000 | ||
Washdown VFDs
 |
Rated NEMA 4, these VFDs are protected from washdowns. Set them to automatically adjust motor speed. Wire a potentiometer (not included) for remote manual control.
NEMA 12 Enclosure Rating—Controls rated NEMA 12 also protect against splashes of oil and coolant when used indoors only.
Output | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Input Voltage, V AC | Current, amp | Voltage, V AC | Freq., Hz | Input Analog Signal | Ht. | Wd. | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | |||
Single-Phase Input | |||||||||||||||||
Reversing Motor | |||||||||||||||||
| 1 | 200 to 240 | 4.2 | 200 to 240 | 0 to 120 | 0 to 10V DC, 4 to 20 mA | 8" | 6.5" | No | 0.25" (4) | — | Corrosive, Oily, Outdoor, Washdown, Wet, Dusty | NEMA 4, NEMA 12, IP65 | UL Listed C-UL Listed CE Marked | 7786K72 | 0000000 | ||
Single-Phase Input/Three-Phase Input | |||||||||||||||||
Reversing Motor | |||||||||||||||||
| 2 | 200 to 240 | 7 | 200 to 240 | 0 to 500 | 0 to 10V DC, 4 to 20 mA | 8" | 6.28" | Yes | 0.2" (4) | Thermal Overload Protection | Outdoor, Washdown, Wet, Dusty | NEMA 4, IP65 | UL Listed C-UL Listed CE Marked | 7786K39 | 000000 | ||
Reversing Washdown DC Motor Drives
 |
Use these drives with motors that run forward and backward, such as motors for conveyor belts. They have a NEMA 4X rated enclosure to withstand corrosion and washdowns. Use them to convert AC input voltage into DC output voltage and control the speed of permanent-magnet DC motors.
Power, hp (Input Voltage/Output Voltage) | Current, amp | Ht. | Wd. | Wire Connection | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Environment | Enclosure Rating | Certification | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Single-Phase Input | ||||||||||||||
Reversing Motor | ||||||||||||||
| 1/8 to 1 (115V AC/0V DC to 90V DC) 1/4 to 2 (230V AC/0V DC to 180V DC) | 10 | 7.5" | 5.63" | Screw Terminal | Yes | 0.19" (4) | On/Off Switch | Corrosive, Dusty, Outdoor, Washdown, Wet | NEMA 4X | C-UL Listed, UL Listed | 7793K64 | 0000000 | ||
Open Frame VFDs
 |
Vary the speed of three-phase AC motors. Mount these VFDs inside a machine or control cabinet. They’re often used in packaging machines, conveyors, and vacuum equipment. Operate VFDs manually or remotely with an electrical signal.
Output | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Power, hp | Input Voltage, V AC | Voltage, V AC | Freq., Hz | Ht. | Wd. | Mounting Fasteners Included | Mounting Hole Dia. (No. of) | Features | Certification | Each | |||
Single-Phase Input | |||||||||||||
Reversing Motor | |||||||||||||
| 1/2 | 115/230 | 230 | 0 to 120 | 3" | 4.3" | Yes | 0.19" (6) | Maximum Speed Setting, Run and Jog Modes, Torque Boost | UL Listed C-UL Listed | 6488K21 | 0000000 | ||
| 1 | 115/230 | 230 | 0 to 120 | 4.4" | 6.9" | Yes | 0.19" (6) | Maximum Speed Setting, Run and Jog Modes, Torque Boost | UL Listed C-UL Listed | 6488K22 | 000000 | ||
 |
Input Analog Signal | Each | ||
|---|---|---|---|
| 0 to 5V DC, 0 to 10V DC, 4 to 20 mA | 6488K31 | 0000000 |
