McMaster-Carr logo
    Filter by
    System of Measurement
    Electrical Phase
    Number of Auxiliary Contacts
    Mounting Location
    Motor Reversing Capability
    Reset Type
    Auxiliary Contact Switch Starting Position
    Industrial Info Compare
    Trip Time
    Overload Protection Class
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enclosure Rating
    Industrial Info Compare
    Housing Material
    Number of Mounting Holes
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    70 Products

    Motor Starters

    Image of Product. Front orientation. Motor Starters. Motor Starters .
    Provide on/off control for a motor and protect it from overloads. These starters shut off the motor if current exceeds the full-load current rating. All have an adjustable overload relay that allows you to set the exact overload current you need.
    Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s power and voltage).
    Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.
    Auxiliary Contact Switch Starting Position—Starters with auxiliary contacts can send a signal or connect to another device, such as an alarm or indicating light.
    Motor Starters
    Auxiliary Contact
    Blocks: 2 Off
    Auxiliary Contact
    Blocks: 1 Off, 1 On
    Overload Current,
    amp
    Input Voltage
    Electrical Phase
    Ht.
    Wd.
    Mounting
    Location
    For DIN
    Rail Ht., mm
    Specs.
    Met
    Each
    Each
    Each
    Motor Starters
    20 to 10024V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"2.2"DIN Rail35IEC 609477603K17700000007603K2980000007603K299000000
    20 to 100120V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"2.2"DIN Rail35IEC 609477603K1690000007603K298000007603K29900000
    20 to 100200V AC/240V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"2.2"DIN Rail35IEC 609477603K1760000007603K298000007603K29900000
    20 to 10024V DCSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"2.2"DIN Rail35IEC 609477603K1780000007603K298000007603K29900000
     
    Motor Starters with 1 Auxiliary Contact—1 Off
    1 to 524V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1380000007603K296000007603K29700000
    1 to 5120V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1360000007603K296000007603K29700000
    1 to 5200V AC/240V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1370000007603K296000007603K29700000
    1 to 5480V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1460000007603K296000007603K29700000
    1 to 524V DCSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1390000007603K296000007603K29700000
    4 to 2024V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1490000007603K296000007603K29700000
    4 to 20120V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1470000007603K296000007603K29700000
    4 to 20200V AC/240V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1480000007603K296000007603K29700000
    4 to 20480V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1570000007603K296000007603K29700000
    4 to 2024V DCSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"1.8"DIN Rail35IEC 609477603K1560000007603K296000007603K29700000
    9 to 4524V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"1.8"DIN Rail35IEC 609477603K1660000007603K296000007603K29700000
    9 to 45120V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"1.8"DIN Rail35IEC 609477603K1580000007603K296000007603K29700000
    9 to 45200V AC/240V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"1.8"DIN Rail35IEC 609477603K1590000007603K296000007603K29700000
    9 to 4524V DCSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"1.8"DIN Rail35IEC 609477603K1670000007603K296000007603K29700000
    20 to 100480V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"2.2"DIN Rail35IEC 609477603K1790000007603K298000007603K29900000
     

    Enclosed Motor Starters

    Image of Product. Front orientation. Motor Starters. Enclosed Motor Starters.
    The NEMA 4X rated enclosure protects these starters from corrosion and washdowns. They provide on/off control for a motor and protect it from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
    Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s power and voltage).
    Add auxiliary contact blocks to signal more devices.
    Motor Starters
    Auxiliary Contact
    Blocks: 2 Off
    Auxiliary Contact
    Blocks: 1 Off, 1 On
    Overload Current,
    amp
    Input Voltage
    Electrical Phase
    Ht.
    Wd.
    Enclosure
    Rating
    Certification
    Specs.
    Met
    Each
    Each
    Each
    Motor Starters with 1 Auxiliary Contact—1 Off
    1 to 524V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K18900000007603K2960000007603K297000000
    1 to 5120V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1860000007603K296000007603K29700000
    1 to 5200V AC/240V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1870000007603K296000007603K29700000
    1 to 5480V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1880000007603K296000007603K29700000
    1 to 524V DCSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1960000007603K296000007603K29700000
    4 to 2024V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2360000007603K296000007603K29700000
    4 to 20120V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1970000007603K296000007603K29700000
    4 to 20200V AC/240V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1980000007603K296000007603K29700000
    4 to 20480V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K1990000007603K296000007603K29700000
    4 to 2024V DCSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2370000007603K296000007603K29700000
    9 to 4524V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2670000007603K296000007603K29700000
    9 to 45120V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2380000007603K296000007603K29700000
    9 to 45200V AC/240V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2390000007603K296000007603K29700000
    9 to 45480V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2660000007603K296000007603K29700000
    9 to 4524V DCSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    9.5"6.19"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K2680000007603K296000007603K29700000
     
    Motor Starters with 2 Auxiliary Contacts—1 Off, 1 On
    20 to 10024V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    11.7"9.3"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K278000000007603K298000007603K29900000
    20 to 100200V AC/240V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    11.7"9.3"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K276000000007603K298000007603K29900000
    20 to 100480V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    11.7"9.3"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K277000000007603K298000007603K29900000
    20 to 10024V DCSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    11.7"9.3"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477603K279000000007603K298000007603K29900000
     

    Reversing Motor Starters

    Image of Product. Front orientation. Motor Starters. Reversing Motor Starters .
    Use these starters with motors that run forward and backward, such as motors for conveyor belts. They provide on/off control and protect motors from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
    Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s power and voltage).
    Add auxiliary contact blocks to signal more devices.
    Motor Starters
    Auxiliary Contact
    Blocks: 2 Off
    Auxiliary Contact
    Blocks: 1 Off, 1 On
    Overload Current,
    amp
    Input Voltage
    Electrical Phase
    Ht.
    Wd.
    Mounting
    Location
    For DIN
    Rail Ht., mm
    Specs.
    Met
    Each
    Each
    Each
    Motor Starters with 2 Auxiliary Contacts—1 Off, 1 On
    20 to 10024V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"4.4"DIN Rail35IEC 609477636K2170000000007603K2980000007603K299000000
    20 to 100120V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"4.4"DIN Rail35IEC 609477636K199000000007603K298000007603K29900000
    20 to 100200V AC/240V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"4.4"DIN Rail35IEC 609477636K216000000007603K298000007603K29900000
    20 to 100480V ACSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"4.4"DIN Rail35IEC 609477636K219000000007603K298000007603K29900000
    20 to 10024V DCSingle (5 hp @ 115V AC)
    Single (15 hp @ 230V AC)
    Three (25 hp @ 230V AC)
    Three (50 hp @ 480V AC)
    8.3"4.4"DIN Rail35IEC 609477636K218000000007603K298000007603K29900000
     
    Motor Starters with 3 Auxiliary Contacts—2 Off, 1 On
    1 to 524V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1680000007603K296000007603K29700000
    1 to 5120V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1660000007603K296000007603K29700000
    1 to 5200V AC/240V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1670000007603K296000007603K29700000
    1 to 5480V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1760000007603K296000007603K29700000
    1 to 524V DCSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1690000007603K296000007603K29700000
    4 to 2024V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1790000007603K296000007603K29700000
    4 to 20120V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1770000007603K296000007603K29700000
    4 to 20200V AC/240V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1780000007603K296000007603K29700000
    4 to 20480V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1870000007603K296000007603K29700000
    4 to 2024V DCSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    5.6"3.6"DIN Rail35IEC 609477636K1860000007603K296000007603K29700000
    9 to 4524V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"3.6"DIN Rail35IEC 609477636K196000000007603K296000007603K29700000
    9 to 45120V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"3.6"DIN Rail35IEC 609477636K188000000007603K296000007603K29700000
    9 to 45200V AC/240V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"3.6"DIN Rail35IEC 609477636K189000000007603K296000007603K29700000
    9 to 45480V ACSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"3.6"DIN Rail35IEC 609477636K198000000007603K296000007603K29700000
    9 to 4524V DCSingle (3 hp @ 115V AC)
    Single (5 hp @ 230V AC)
    Three (10 hp @ 230V AC)
    Three (20 hp @ 480V AC)
    6.3"3.6"DIN Rail35IEC 609477636K197000000007603K296000007603K29700000
     

    Enclosed Reversing Motor Starters

    Image of Product. Front orientation. Motor Starters. Enclosed Reversing Motor Starters.
    Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns. Use them with motors that run forward and backward, such as motors for conveyor belts. They provide on/off control and protect motors from overloads—starters will shut the motor off if current exceeds the full-load current rating. Set the adjustable overload relay for the exact overload current needed. All have auxiliary contacts to send a signal or connect to another device, such as an alarm or indicating light.
    Note: The full-load current rating of your motor must fall within the starter’s overload current range. Match input voltage, also known as coil voltage, to your control circuit; motor voltage may be different. Look for the full-load current rating on the motor’s faceplate, or estimate the current rating (given the motor’s power and voltage).
    Add auxiliary contact blocks to signal more devices.
    Motor Starters
    Auxiliary Contact
    Blocks: 2 Off
    Auxiliary Contact
    Blocks: 1 Off, 1 On
    Overload
    Current, amp
    Input Voltage
    Electrical Phase
    Ht.
    Wd.
    Enclosure
    Rating
    Certification
    Specs.
    Met
    Each
    Each
    Each
    Motor Starters with 3 Auxiliary Contacts—2 Off, 1 On
    1 to 524V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K22900000007603K2960000007603K297000000
    1 to 5200V AC/240V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2270000007603K296000007603K29700000
    1 to 5480V ACSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2280000007603K296000007603K29700000
    1 to 524V DCSingle (1/4 hp @ 115V AC)
    Single (1 hp @ 230V AC)
    Three (2 hp @ 230V AC)
    Three (3 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2360000007603K296000007603K29700000
    4 to 2024V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2460000007603K296000007603K29700000
    4 to 20120V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2370000007603K296000007603K29700000
    4 to 20200V AC/240V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2380000007603K296000007603K29700000
    4 to 20480V ACSingle (1 hp @ 115V AC)
    Single (2 hp @ 230V AC)
    Three (3 hp @ 230V AC)
    Three (10 hp @ 480V AC)
    11"7.9"NEMA 4X, IP66
    UL Listed, CSA Certified
    IEC 609477636K2390000007603K296000007603K29700000
     
    back to top