About Files
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
Needle Files
The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Half-round files can be used on concave, convex, and flat surfaces.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
Knife files get into tight angles, corners, and slots.
Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
For technical drawings and 3-D models, click on a part number.
Lg. | Dia. | Wd. | Thick. | Face Tooth Style | Edge Tooth Style | For Use On | Each | |
For Medium Finish (No. 0) | ||||||||
---|---|---|---|---|---|---|---|---|
Straight Rectangular | ||||||||
6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 000000 |
Tapered Rectangular | ||||||||
6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
6 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
For Fine Finish (No. 2) | ||||||||
Straight Rectangular | ||||||||
6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Rectangular | ||||||||
6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
6 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
For Extra Fine Finish (No. 4) | ||||||||
Straight Rectangular | ||||||||
6 1/4" | __ | 0.213" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Rectangular | ||||||||
6 1/4" | __ | 0.215" | 0.047" | Double Cut × Double Cut | Single Cut × Single Cut | Steel, Iron | 0000000 | 00000 |
Tapered Half Round | ||||||||
6 1/4" | __ | 0.22" | 0.069" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Round | ||||||||
6 1/4" | 0.115" | __ | __ | Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Triangular | ||||||||
6 1/4" | __ | 0.154" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Square | ||||||||
6 1/4" | __ | 0.094" | __ | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Knife | ||||||||
6 1/4" | __ | 0.213" | 0.059" | Double Cut × Double Cut | Single Cut (Knife Edge) × None (Thick Edge) | Steel, Iron | 0000000 | 00000 |
Tapered Barrette | ||||||||
6 1/4" | __ | 0.201" | 0.071" | Double Cut × None × None | __ | Steel, Iron | 0000000 | 00000 |
Tapered Crossing | ||||||||
8 1/4" | __ | 0.201" | 0.079" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Straight Joint | ||||||||
6 1/4" | __ | 0.209" | 0.051" | None × None | Double Cut × Double Cut | Steel, Iron | 0000000 | 00000 |
Straight Slitting | ||||||||
6 1/4" | __ | 0.236" | 0.086" | Double Cut × Double Cut | __ | Steel, Iron | 0000000 | 00000 |
Tapered Marking | ||||||||
6 1/4" | __ | 0.209" | 0.071" | Double Cut × None | __ | Steel, Iron | 0000000 | 00000 |
Bend-and-Stay Needle Files
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Half-round files can be used on concave, convex, and flat surfaces.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
For Fine Finish (No. 2) | |||||||
---|---|---|---|---|---|---|---|
Lg. | Dia. | Wd. | Thick. | Face Tooth Style | For Use On | Each | |
Rectangular | |||||||
6 1/4" | __ | 7/32" | 1/16" | Single Cut | Steel, Iron | 0000000 | 000000 |
Half Round | |||||||
6 1/4" | __ | 3/32" | 5/64" | Single Cut | Steel, Iron | 0000000 | 00000 |
Round | |||||||
6 1/4" | 1/8" | __ | __ | Single Cut | Steel, Iron | 0000000 | 00000 |
Triangular | |||||||
6 1/4" | __ | 1/8" | __ | Single Cut | Steel, Iron | 0000000 | 00000 |
Square | |||||||
6 1/4" | __ | 7/64" | __ | Single Cut | Steel, Iron | 0000000 | 00000 |
Barrette | |||||||
6 1/4" | __ | 3/32" | 1/16" | Single Cut | Steel, Iron | 0000000 | 00000 |
Economy Needle File Sets
These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.
For technical drawings and 3-D models, click on a part number.
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 00000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. | Steel, Iron | 0000000 | 0000 |
4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 0000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 00000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 0000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. | Steel, Iron | 0000000 | 0000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. | Steel, Iron | 0000000 | 00000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 00000 |
Needle File Sets
These files are for frequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
For technical drawings and 3-D models, click on a part number.
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. | Steel, Iron | 0000000 | 000000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. | Steel, Iron | 0000000 | 000000 |
Finish No. | Includes | For Use On | Each | |
0 | One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 0000000 |
2 | One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
4 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
6 | One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. | Steel, Iron | 0000000 | 000000 |
Bend-and-Stay Needle File Sets
Barrette | Half Round | Rectangular | ||
Round | Square | Triangular |
Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Finish No. | Includes | For Use On | Each | |
6-Piece Sets | ||||
---|---|---|---|---|
2 | One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick. | Steel, Iron | 0000000 | 0000000 |
Diamond Needle Files
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.
Files with 1.563" diamond surface length are also known as escapement files.
Half-round files can be used on concave, convex, and flat surfaces.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
Knife files get into tight angles, corners, and slots.
For technical drawings and 3-D models, click on a part number.
For Coarse Finish (80-100 Grit) | For Medium Finish (120-150 Grit) | For Fine Finish (150-180 Grit) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Diamond Surface Lg. | Lg. | Dia. | Wd. | Thick. | For Use On | Each | Each | Each | |||
Straight Rectangular | |||||||||||
1.563" | 5 1/2" | __ | 0.154" | 0.043" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
2.75" | 5 1/2" | __ | 0.201" | 0.055" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00000 | 000000 | 00000 |
Thin Tapered Rectangular | |||||||||||
2.75" | 5 1/2" | __ | 0.205" | 0.055" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Tapered Half Round | |||||||||||
1.563" | 5 1/2" | __ | 0.169" | 0.071" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
2.75" | 5 1/2" | __ | 0.213" | 0.075" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00000 |
Tapered Round | |||||||||||
1.563" | 5 1/2" | 0.067" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
2.75" | 5 1/2" | 0.118" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00000 |
Tapered Triangular | |||||||||||
1.563" | 5 1/2" | __ | 0.122" | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
2.75" | 5 1/2" | __ | 0.154" | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00000 |
Tapered Square | |||||||||||
1.563" | 5 1/2" | __ | 0.079" | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Tapered Knife | |||||||||||
2.75" | 5 1/2" | __ | 0.213" | 0.063" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00000 |
Tapered Barrette | |||||||||||
1.563" | 5 1/2" | __ | 0.154" | 0.055" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
2.75" | 5 1/2" | __ | 0.197" | 0.067" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Tapered Crossing | |||||||||||
1.563" | 5 1/2" | __ | 0.165" | 0.071" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Flexible Diamond Needle Files
Wire-thin and easy to bend, these files reach tight spots in delicate workpieces, yet they're strong enough to shape hard metal, such as titanium. They're made of diamond—the hardest, longest-lasting abrasive available.
For technical drawings and 3-D models, click on a part number.
For Fine Finish (150-180 Grit) | For Extra Fine Finish (240-320 Grit) | For Extra Fine Finish (500-600 Grit) | |||||||
---|---|---|---|---|---|---|---|---|---|
Diamond Surface Lg. | Lg. | Dia. | For Use On | Each | Each | Each | |||
Round | |||||||||
2.756" | 5 1/8" | 0.016" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 000000 | 00 | 000000 | 00 | 0000000 | 000000 |
2.756" | 5 1/8" | 0.02" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 000000 | 00 | 0000000 | 000000 | 000000 | 00 |
2.756" | 5 1/8" | 0.024" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
2.756" | 5 1/8" | 0.028" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
2.756" | 5 1/8" | 0.031" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
2.756" | 5 1/8" | 0.039" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
2.756" | 5 1/8" | 0.059" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
2.756" | 5 1/8" | 0.079" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
Diamond Needle File Sets
Straight Rectangular | Tapered Crossing | Tapered Half Round | |
Tapered Round | Tapered Square | Tapered Triangular |
The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tips allow precise work in tight spots.
For technical drawings and 3-D models, click on a part number.
Includes | For Use On | Each | |
One Coarse-Finish (80-100 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish (80-100 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Coarse-Finish (80-100 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Coarse-Finish (80-100 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Coarse-Finish (80-100 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Coarse-Finish (80-100 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Includes | For Use On | Each | |
One Medium-Finish (120-140 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish (120-140 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Medium-Finish (120-140 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish (120-140 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Medium-Finish (120-140 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Medium-Finish (120-140 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Includes | For Use On | Each | |
One Fine-Finish (170-200 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish (170-200 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Fine-Finish (170-200 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish (170-200 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Fine-Finish (170-200 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Fine-Finish (170-200 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick. | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick | 0000000 | 0000000 |
Carbide Needle Files
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.
Round files are good for filing holes and concave surfaces.
Triangular files have three filing surfaces to work in spots others can't.
Square files are good for slots, keyways, grooves, and corners.
Knife files get into tight angles, corners, and slots.
For technical drawings and 3-D models, click on a part number.
For Extra Fine Finish (280 Grit) | ||||||
---|---|---|---|---|---|---|
Lg. | Dia. | Wd. | Thick. | For Use On | Each | |
Rectangular | ||||||
5 1/2" | __ | 0.236" | 0.083" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
7 1/8" | __ | 0.394" | 0.108" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Round | ||||||
5 1/2" | 0.128" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
7 1/8" | 0.217" | __ | __ | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Triangular | ||||||
5 1/2" | __ | 0.167" | 0.167" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
7 1/8" | __ | 0.276" | 0.276" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Square | ||||||
5 1/2" | __ | 0.128" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
7 1/8" | __ | 0.197" | 0.197" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Knife | ||||||
5 1/2" | __ | 0.207" | 0.089" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
7 1/8" | __ | 0.354" | 0.128" | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 00000 |
Carbide Needle File Sets
Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.
For technical drawings and 3-D models, click on a part number.
Knife | Rectangular | Round | |
Square | Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |
Knife | Rectangular | Round | |
Square | Triangular |
Includes | For Use On | Each | |
One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle | Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick | 0000000 | 000000 |