Gloves that feel light but work hard. Our thinnest cut-protection gloves give you the dexterity and control of lightweight gloves with the cut resistance of heavier ones. They're trusted daily by the McMaster-Carr warehouse team. These gloves are rated to ANSI/ISEA 105 standards for cut, abrasion, and puncture resistance.

Rated to ANSI/ISEA 105 and 138 standards, these gloves offer complete protection from cuts, abrasions, and impacts. The higher the rating, the greater the protection. They’re often worn to handle sheet metal, install pipes, or maintain HVAC equipment. They fit snugly, so they won't limit your dexterity.

Often used in glass manufacturing and metal fabrication, these gloves protect your hands from sharp edges and intermittent heat. They’re rated to ANSI/ISEA 105 standards for cut and heat resistance. The ANSI heat rating reflects the amount of heat they can withstand before there’s a risk of second-degree burns. The higher the number, the greater the protection. Holding heavy objects may decrease the temperature rating.

ANSI cut ratings reflect the amount of force required to cut through them with a razor blade.

Made of leather, these gloves are more durable and wear-resistant than standard cut-protection gloves. All are rated to ANSI/ISEA 105 standards for cuts, punctures, abrasion, or heat.

All of these gloves have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. A4 is the common required minimum in industrial settings. The higher the rating, the greater the protection.

Handle sharp objects in cramped spaces where your hands might bump into heavy machinery. These gloves have bumpers on the back to protect against impacts. Made with polyethylene, they’ll also shield you from cuts and punctures. They’re textured for a secure grip, even when working with slippery objects.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force required to cut through them with a razor blade.

They’re also rated ANSI/ISEA 138 for how much impact they can absorb on a scale of 1 to 3. Higher ratings signify better protection for knuckles and fingers from impact injuries.

Lined to keep hands warm and coated to prevent cuts, these gloves are often worn for work with sharp tools in cold environments. They meet ANSI/ISEA 105 standards for cut, abrasion, puncture, and impact resistance.

All have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. The higher the rating, the more protection they provide.

A coating on the palm adds grip and wear resistance to these cut-protection gloves. They’re rated to ANSI/ISEA standards for protecting hands from cuts, abrasions, and punctures. The thicker the gloves, the more wear they’ll withstand, but you’ll have less touch sensitivity.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Chop, slice, and dice safely and with precision—these gloves keep your fingers nimble while still protecting you from cuts. They’re commonly used with knives and other sharp tools in food-service environments. All meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance. Gloves are sold individually (order two for a pair).

All have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. The higher the rating, the more protection you get.

Keep your fingertips bare to handle objects while still protecting the rest of your hand from cuts. These gloves have an ANSI cut rating of A9, the highest possible rating based on the amount of force needed to cut through them with a razor blade. And while they’re highly protective, they won’t restrict your movement—their 21-gauge knit makes them the thinnest cut-protection gloves available. As a result, they’re often used in precision tasks such as wiring and fine parts assembly.

In addition to cut resistance, these are rated to ANSI/ISEA 105 standards for protection from abrasion and punctures. A nitrile coating makes them resistant to chemicals and oil.

Tougher than standard cold-protection mitts, these mitts protect your hands from cuts and impacts as well as wintry weather. They’re packed with insulation to keep you warm while you work. To keep you dry, the leather exterior is treated for water resistance. A separated index finger makes it easier to grab and hold objects.

These mitts are rated to ANSI/ISEA 105 standards for resistance to cuts, abrasions, and punctures. The higher the rating, the greater the protection. They also meet ANSI 138 standards for impact resistance. Their EN 388 rating means they adhere to European standards for puncture resistance.

Snip circuit board leads, inspect silicon wafers, and handle other sharp components in clean rooms. Not only are these gloves rated to protect your hands from cuts, they’re also lint-free and unlined to prevent shedding. They’re cleaned and bagged in environments with low levels of particulates, so they won’t contaminate your work area.

All meet ANSI/ISEA 105 standards for various forms of protection, such as cuts, abrasions, and punctures.

Safeguard hands from cuts, impacts, and wintry weather—these gloves are tougher than standard cold-protection gloves. They’re packed with insulation to keep you warm while you work. All meet ANSI/ISEA 105 standards for resistance to cuts, abrasions, punctures, or heat. They also meet ANSI/ISEA 138 standards for impact resistance. The higher the rating, the greater the protection.

Snap these sleeves on your forearm to shield from sharp objects and fragments as thin as needles, glass shards, and metal shavings. They meet the ANSI needlestick rating, which rates gloves and sleeves on a scale of 1-5 based on how much force it takes to puncture them with a needle. Higher numbers represent more protection.

These sleeves meet ANSI/ISEA 105 standards for various forms of protection, such as resistance to cuts, abrasion, punctures, and heat. Their ANSI cut rating reflects how much force is needed to cut through them with a razor blade. At A8, they’re safe to use with spikes and bulky objects with sharp edges. They also meet EN 388, a European standard that rates their resistance to abrasion, cuts, tears, punctures, and impact.

Use these sleeves alone or with gloves to protect your arms when handling sharp objects. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance.

All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.