About Powered Nibblers and Powered Cutters
More
Electric Sheet Metal Nibblers
Punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
Style B comply with OSHA 29 CFR 1910.243, so they meet standards for hand-held equipment. They also meet OSHA Compliant 29 CFR 1926.302 and fulfill requirements for power-operated hand tools.
Style D can also cut aluminum with the punch, die, and stripper for use on aluminum (sold separately).
Nibblers, punches, and dies that cannot be sold to the listed areas are restricted due to product regulations.
Straight, Right
Curves, Left Curves
For Max. Thick. | Material | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Voltage | Current, A | Cannot Be Sold To | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin | |||||||||||||||||
| 1/16" | 3/64" | 7/64" | 1/4" | 1 3/4" | 10 1/4" | Steel | Polycarbonate | 2,200 | 74 | 1/2" | Corrugated, Flat | Push Button | 120V DC | 5 | Outside United States | 0000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/8" | 3/32" | 5/64" | 0.24" | 2 1/2" | 12 1/4" | Steel | Magnesium | 1,000 | 105 | 1 21/32" | Corrugated, Flat | Toggle | 120V DC 120V AC | 4 | __ | 0000000 | 00000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 11/64" | 1/8" | 3/16" | 0.21" | 6" | 13" | Steel | Aluminum | 260 | 48 | 2 1/2" | Flat | Trigger with Lock | 110V AC | 3-5 | __ | 0000000 | 00000000 |
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 8" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | __ | 0000000 | 00000000 |
Cutting Pattern—Straight | |||||||||||||||||
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 32" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | __ | 000000 | 00000000 |
| Cannot Be Sold To | Each | ||
| Replacement Punch for Style A | Outside United States | 00000000 | 000000 |
| Replacement Punch For Style B | __ | 0000000 | 00000 |
| Replacement Punch for Style C | __ | 0000000 | 00000 |
| Replacement Punch for Style D | __ | 0000000 | 00000 |
| Optional Punch for Style D (Required for cutting aluminum) | __ | 0000000 | 00000 |
| Optional Punch for Style D (Recommended for cutting stainless steel) | __ | 0000000 | 00000 |
| Each | ||
| Replacement Die Holder for Style B | 0000000 | 0000000 |
| Each | ||
| Replacement Toggle Switch for Style B | 0000000 | 000000 |
| Each | ||
| Replacement Assembly Screws for Style D | 00000000 | 00000 |
| Each | ||
| Replacement Bearing for Style D | 00000000 | 000000 |
| Each | ||
| Replacement Grease Fitting for Style D | 00000000 | 00000 |
Air-Powered Sheet Metal Nibblers
Straight, Right
Curves, Left Curves
These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Air Consumption, cfm | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin, Plastic | |||||||||||||||
| 3/64" | __ | 1/32" | 1/4" | 1/4" | 7 1/16" | Steel | Aluminum | 3,200 | 62 | 1/2" | Corrugated | Lever | 21 | 00000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Steel, Tin | |||||||||||||||
| 3/64" | __ | 3/64" | 3/16" | 3/16" | 7" | Steel | Plastic | 2,600 | 46.5 | 5/8" | Corrugated | Lever | 4 | 0000000 | 000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/32" | 5/64" | 1/8" | 1/4" | 2" | 12" | Steel | Aluminum | 192 | 55 | 1 1/2" | Corrugated, Flat | Lever | 27 | 000000 | 000000 |
Cutting Pattern—Straight | |||||||||||||||
(D) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 11/64" | 1/8" | 11/64" | 3/16" | 6" | 12" | Steel | Aluminum | 192 | 48 | 2 1/2" | Flat | Trigger with Lock | 21-23 | 00000000 | 00000000 |
Punch Cutter Attachment for Portable Drills
Straight, Right
Curves, Left Curves
Turn your portable drill into a punch cutter for cutting curved and straight shapes in flat and corrugated sheet metal and plastic. To start cuts in the center of material, drill a starting hole.
Punch Cutter | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Punches | |||||||||||||
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | For Max. Drill Speed, rpm | Shank Size | Shank Shape | Punch Material | Housing Material | Starting Hole Dia. | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||
| 1/32" | 1/32" | 1/32" | 3/16" | 5 5/8" | 3,000 | 1/4" | Hex | Steel | Plastic | 1/2" | 0000000 | 0000000 | 0000000 | 000000 |
Sheet Metal Hole Cutters
- Straight,
Left Curves
Make round, square, and irregular-shaped holes with this punch-style hole cutter. Drill a 3/8" dia. starting hole, then push the cutter through the hole and squeeze the handles together to cut out small pieces of material.
For Max. Thick. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Starting Hole Dia. | Overall Lg. | Steel | Aluminum | Copper | Handle Material | Handle Color | Opening Style | Punch Material | Each | |
Cutting Pattern—Straight, Left Curves | ||||||||||
For Use On Aluminum, Copper, Plastic, Steel | ||||||||||
| 3/8" | 7 1/4" | 3/64" | 1/16" | 1/16" | Steel | Silver | Manual | Steel | 0000000 | 000000 |
Smooth-Edge High-Force Sheet Metal Cutters with Safety Guard
Straight, Right
Curves, Left Curves
Prevent waste from flying up as you work. A double blade makes two cuts, creating a 7/64" wide strip that peels back leaving little distortion and smooth edges. Also known as aviation snips, these cutters have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. The serrated blade edge prevents slipping.
Cutters | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Blades | ||||||||||||||||
| Overall Lg. | Cut Lg. | Cut Wd. | Steel | Aluminum | Brass | Copper | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||
For Use On Aluminum, Brass, Copper, Plastic, Steel, Tin | |||||||||||||||||
| 11" | 1/4" | 7/64" | 3/64" | 1/16" | 1/16" | 1/16" | Steel | Plastic | Black and Orange | Plastic | Spring Assisted | Straight × Serrated | Latch | 000000 | 000000 | 0000000 | 000000 |
Smooth-Edge High-Force Sheet Metal Cutters with Offset Handles
Straight, Right
Curves, Left Curves
This cutter has two blades that cut a 1/8" wide strip—peel it back for smooth edges with little distortion. Also known as aviation snips, this cutter has a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use.
| Overall Lg. | Cut Lg. | Cut Wd. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||
| 10" | 1 3/8" | 1/8" | 1/32" | Steel | Steel | Yellow | Plastic | Spring Assisted | Straight × Straight | Latch | 0000000 | 000000 |
Sheet Metal Notch Cutters
Cut up to 1" deep V-shaped notches in sheet metal.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Notch Angle | Notch Depth | Overall Lg. | Steel | Stainless Steel | Aluminum | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Each | |
For Use On Aluminum, Stainless Steel, Steel | ||||||||||||
| 32° | 13/16" | 9" | 1/32" | 1/64" | 1/32" | Steel | Steel | Black | Rubber | Manual | 0000000 | 0000000 |
Notch-Cutting Bench-Mount Sheet Metal Cutters
Notch, cut, and pierce a variety of materials including metal, plastic, and vinyl. These versatile cutters have an adjustable stroke length for piercing and knockout operations.
Cutters | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Overall | Mounting Holes | Replacement Blades | ||||||||||||||||||
| Notch Angle | Steel | Stainless Steel | Aluminum | Tin | Brass | Copper | Iron | Nickel | Overall Lg. | Notch Dp. | Ht. | Wd. | Handle Lg. | Weight, lbs. | No. of | Dia. | Fasteners Included | Each | Each | ||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||||||||||
| 90° | 3/64" | 3/64" | 5/64" | 1/16" | 1/16" | 1/16" | 3/64" | 3/64" | 19" | 4 1/4" | 15" | 18" | 22 1/4" | 170 | 4 | 1/2" | No | 000000 | 000000000 | 000000 | 0000000 |
| Optional Floor Stand | 0000000 | Each | 0000000 |
Plier-Action Keyway Punches
Cut keyways at the edges of existing holes. Also known as a keyway nibbler.
| For Keyway Notch Lg. × Wd. | For Max. Steel Thick. | Material | Each | |
For Use On Aluminum, Brass, Copper, Steel | ||||
|---|---|---|---|---|
| 3/32" × 1/8", 1/8" × 3/16" | 1/8" | Steel | 0000000 | 0000000 |