How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Low-Pressure Press-Connect Steel Unthreaded Pipe Fittings
- For Use On:
EPDM Rubber O-Ring: Ethylene Glycol, Propylene Glycol, Water
Buna-N Rubber O-Ring: Air, Lubricants, Propane, Fuel Oil, Natural Gas, Diesel Fuel - Specifications Met:
EPDM Rubber O-Ring: ASME B31,1, ASME B31.3, ASME B31.9, FM 1920, UL 213
Buna-N Rubber O-Ring: ASME B31.1, ASME B31.3, ASME B31.9, ANSI LC4/CSA 6.32, International Fuel Gas Code - Maximum Pressure:
EPDM Rubber O-Ring: 200 psi @ 72° F
Buna-N Rubber O-Ring: 125 psi @ 72° F - Pipe Nipples and Pipe: Use Schedule 40 Steel
- Flanges: Use Class 150 Steel
Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings.
Fittings meet ASME B31 code requirements for use in pressure piping systems.
Buna-N rubber O-rings hold up to natural gas, propane, diesel fuel, lubricants, and other oils. Fittings with these O-rings are often used in fuel gas systems and air lines. They meet the ANSI LC4/CSA 6.32 standard for fuel gas systems and comply with the International Fuel Gas Code.
Unions separate into three pieces. Unscrew and remove the center nut for quick access to a line.
For technical drawings and 3-D models, click on a part number.
Buna-N Rubber O-Ring | |||
|---|---|---|---|
Pipe Size | Socket Dp. | Each | |
| 1 1/4 | 0.375" | 00000000 | 000000 |
Inline tees are also known as branch tees.
(A) | (B) | Buna-N Rubber O-Ring | |||
|---|---|---|---|---|---|
| Pipe Size | Socket Dp. | Pipe Size | Thread Type | Each | |
| 2 | 0.375" | 3/4 | NPT | 00000000 | 0000000 |
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
| Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
High-Pressure Nipples for Compressed Gas
Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut (sold separately) so you can make a threaded connection.
Brass nipples have good corrosion resistance and are softer than 316 stainless steel nipples, so they're easier to thread together. Chrome-plated brass nipples have better corrosion and wear resistance than unplated brass nipples and have a bright, shiny appearance.
Nipples that tighten by hand should be paired with a nut with a plastic grip.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F
Regulator Connection | ||||||
|---|---|---|---|---|---|---|
| For Number (Max. Pressure) | Pipe Size | Thread Type | Lg. | For Use With | Each | |
Brass—Tighten With Wrench | ||||||
| CGA 170 (3,000 psi @ 72° F) | 1/8 | NPT | 1 1/4" | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 000000 |
| CGA 180 (3,000 psi @ 72° F) | 1/8 | NPT | 2" | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 00000 |
| CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 2 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
| CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 3" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
| CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F) | 1/4 | NPT | 3 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 0000 |
Brass—Tighten By Hand | ||||||
| CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F) | 1/4 | NPT | 3 33/64" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 00000 |
Chrome-Plated Brass—Tighten With Wrench | ||||||
| CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F) | 1/4 | NPT | 3 1/2" | Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon | 000000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F
| Number | Gender | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| CGA 500 | Male | 0.880"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Medical Gas Mixtures | 000000000 | 000000 |
| CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 0000 |
| CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 0000 |
| CGA 590 | Male | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 0000 |
Brass with Plastic Grip | ||||||||
| CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
| CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
Aluminum-Plated Brass | ||||||||
| CGA 170 | Female | 9/16"-18 | UN/UNF (CGA) | Right Hand | 3,000 psi @ 72° F | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 00000 |
| CGA 180 | Female | 5/8"-18 | UN/UNF (CGA) | Right Hand | 3,000 psi @ 72° F | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 00000 |
Chrome-Plated Brass | ||||||||
| CGA 510 | Male | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
| CGA 580 | Male | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
| CGA 590 | Male | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 00000 |
Nuts for High-Pressure Nipples for Compressed Gas
Slide a high-pressure hose nipple for compressed gas into one of these nuts to connect a pipe to the inlet of a pressure regulator. They are also known as CGA (Compressed Gas Association) nuts and inlet nuts.
Brass nuts have good corrosion resistance and are softer than 316 stainless steel nuts, so they're easier to thread together. Aluminum-plated brass nuts have better corrosion and wear resistance than unplated brass. Chrome-plated brass nuts have comparable corrosion and wear resistance to aluminum-plated brass nuts, and have a bright, shiny appearance.
Nuts with a plastic grip can be tightened by hand instead of with a wrench.
Nuts with left-hand threads are identified with a notch.
Note: Nuts have a CGA, BS, or DIN number that corresponds to a specific type of gas. Choose a nut with the same number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F, except DIN 477 No. 9: 250° F
| Number | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Aluminum-Plated Brass | |||||||
|---|---|---|---|---|---|---|---|
| CGA 170 | 9/16"-18 | UN/UNF (CGA) | Right Hand | 3,000 psi @ 72° F | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 000000 |
| CGA 180 | 5/8"-18 | UN/UNF (CGA) | Right Hand | 3,000 psi @ 72° F | Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene | 000000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F, except DIN 477 No. 12: 250° F
| Number | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| CGA 500 | 0.880"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Medical Gas Mixtures | 000000000 | 000000 |
| CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 0000 |
| CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 0000 |
| CGA 590 | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 0000 |
Brass with Plastic Grip | |||||||
| CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
| CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
Chrome-Plated Brass | |||||||
| CGA 510 | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 000000000 | 00000 |
| CGA 580 | 0.960"-14 | NGO | Right Hand | 3,000 psi @ 72° F | Argon, Helium, Krypton, Neon, Nitrogen, Xenon | 000000000 | 00000 |
| CGA 590 | 0.960"-14 | NGO | Left Hand | 3,000 psi @ 72° F | Sulfur Hexafluoride | 000000000 | 00000 |
High-Pressure Threaded Fittings for Compressed Gas
Designed to handle high-pressure welding applications, these fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Temperature: 120° F
CGA Number | Tank Connection | Regulator Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tank | Regulator | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||||||
| 200 | 510 | 0.628"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 000000 |
| 300 | 510 | 0.830"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethyl Chloride, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 0000 |
| 520 | 510 | 0.899"-14 | NGO | Right Hand | 0.880"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
- Maximum Pressure: See table
- Maximum Temperature: 120° F
CGA Number | Tank Connection | Regulator Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tank | Regulator | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | Max. Pressure | For Use With | Each | |
Brass | |||||||||||
| 510 | 200 | 0.880"-14 | NGO | Left Hand | 0.628"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 000000 |
| 510 | 300 | 0.880"-14 | NGO | Left Hand | 0.830"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethyl Chloride, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
| 510 | 410 | 0.880"-14 | NGO | Left Hand | 0.855"-14 | NGO | Left Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
| 510 | 520 | 0.880"-14 | NGO | Left Hand | 0.899"-14 | NGO | Right Hand | 500 psi @ 72° F | Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride | 0000000 | 00000 |
Threaded Hose Fittings for Compressed Gas
Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Male Hose Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||||
| 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 00000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Female Hose Connection | Male Pipe Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Male Hose Connection | Male Pipe Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| CGA Number | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | Pipe Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
| 021 | A | 3/8"-24 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 00000 |
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/8 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1/4 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 0000 |
| 023 | B | 9/16"-18 | UN/UNF (CGA) | Left Hand | 3/8 | NPT | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 000000000 | 0000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
Threaded Hose-to-Propane-Torch Adapters for Compressed Gas
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
These adapters allow you to connect a hose to a propane torch. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance. Fittings have left-hand threads that are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
CGA Number | Hose Connection | Torch Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Hose | Torch | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
| 023 | 600 | 9/16"-18 | UN/UNF (CGA) | Left Hand | 1"-20 | UN/UNF (CGA) | Right Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
Barbed Hose Fittings for Compressed Gas
Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.
Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection. Adapters with a spiral barbed end twist into hose for an easier installation than adapters with a standard barb.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hose ID | For CGA Number | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
| 3/16" | 020, 021 | A | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 00000 | 020 | 0000000 | 00000 | 021 | 000000000 | 00000 |
| 3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
| 1/4" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
| 5/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
| 3/8" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hose ID | For CGA Number | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
| 3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 00000 | 022 | 000000 | 00000 | 023 | 000000 | 00000 |
| 1/4" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000 | 022 | 000000 | 000 | 023 | 000000 | 000 |
Threaded Hose-to-Propane-Tank Adapters for Compressed Gas
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
These adapters have a male threaded end that connects to a propane tank and a male threaded end that connects to a hose. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance. Fittings have left-hand threads that are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
CGA Number | Hose Connection | Tank Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Hose | Tank | Thread Size | Thread Type | Thread Direction | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
Brass | ||||||||||
| 023 | 510 | 9/16"-18 | UN/UNF (CGA) | Left Hand | 0.880"-14 | NGO | Left Hand | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Propane | 0000000 | 000000 |
Hose Crimping Tool and Fitting Sets for Compressed Gas
Sets contain a crimping tool and a variety of fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Barbed adapters let you adapt to a threaded end so you can connect welding hose to pressure regulators or torches. They consist of a barbed shaft with a rounded end that sits inside a threaded nut so you can make a threaded hose connection.
Barbed connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Slide the barbed end into welding hose and use a hose ferrule and the crimping tool to secure the fitting to hose.
Threaded connectors let you attach threaded welding hose to pressure regulators and torches.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
| For Hose ID | No. of Pieces | Includes | Max. Pressure | For Use With | Each | |
Brass | ||||||
|---|---|---|---|---|---|---|
| 3/16", 1/4" | 93 | Crimping Tool Eight barbed hose adapters for 3/16" hose ID (use with A-size nuts) Six barbed hose adapters for 3/16" hose ID (use with B-size nuts) Ten barbed hose adapters for 1/4" hose ID (use with B-size nuts) Two barbed hose connectors for 3/16" hose ID Four barbed hose connectors for 1/4" hose ID One A-size 3/8"-24 male right-hand threaded connector (CGA-020) One A-size 3/8"-24 male left-hand threaded connector (CGA-021) One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Four A-size 3/8"-24 right-hand threaded nuts (CGA-020) Four A-size 3/8"-24 left-hand threaded nuts (CGA-021) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Twelve ferrules with 0.45" hose end ID Ten ferrules with 0.562" hose end ID Twelve ferrules with 0.593" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000000 |
| 5/16", 3/8" | 71 | Crimping Tool Eight barbed hose adapters for 5/16" hose ID (use with B-size nuts) Eight barbed hose adapters for 3/8" hose ID (use with B-size nuts) Two barbed hose connectors for 5/16" hose ID Two barbed hose connectors for 3/8" hose ID One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Eight ferrules with 0.625" hose end ID Eight ferrules with 0.656" hose end ID Six ferrules with 0.687" hose end ID Eight ferrules with 0.718" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 000000 |
Quick-Disconnect Hose Couplings for Compressed Gas
Use these couplings to quickly link and unlink welding hoses, torches, and pressure regulators. They consist of a plug and socket that are sold together as a set of two—you’ll get one right-hand connection for oxygen and one left-hand connection for fuel gas. The connections are noninterchangeable and color coded so you can’t mix lines. The male threaded ends attach to threaded welding hose, and the female threaded ends attach to a torch or pressure regulator. To connect couplings, push the plug into the socket; the sleeve on the socket has a spring-loaded lock for gas-tight connections. To disconnect, pull back on the socket sleeve and twist to release the plug. The sockets have a shut-off valve that stops the flow when the coupling is separated so gas won’t leak from the line. The sockets also have a built-in check valve to prevent gas backflow. Couplings are also known as CGA (Compressed Gas Association) couplings. They are brass for good corrosion resistance.
Couplings with left-hand threads are identified with a notch in the nut.
Note: Couplings have a CGA number that corresponds to a specific type of gas. Make sure the CGA number of the coupling matches the CGA number of your tank and other system components.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
| Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
| One CGA 022 Coupling Adapter (Male Hose Plug × Female Torch Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Torch Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
| Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
| One CGA 022 Coupling Adapter (Male Hose Plug × Female Regulator Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Female Regulator Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Specifications Met: OSHA 29 CFR 1915.55, OSHA 29 CFR 1917.152, OSHA 29 CFR 1926.350, UL Listed
| Includes | Gas Fitting Size | Thread Size | Thread Type | Thread Direction | For Use With | Each | |
| One CGA 022 Coupling Adapter (Male Hose Plug × Male Hose Socket) One CGA 023 Coupling Adapter (Male Hose Plug × Male Hose Socket) | B | 9/16"-18 | UN/UNF (CGA) | Right Hand (CGA 022), Left Hand (CGA 023) | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 0000000 |
Minimal-Spill Push-and-Turn Hose Couplings for Natural and LP Gas
Often used for loading and unloading gas tankers, these couplings are tough enough to handle frequent connections and designed to be virtually spill-free. The socket has a rubber lip and large handles that protect it if it’s dropped. To connect, simply push the plug into the socket and twist 90°. Also known as dry disconnects and double-shut off couplings, both the plug and the socket have a shut-off valve that holds your line when they’re separated. A close fit between the plug and socket means there's little room for gas to leak when you disconnect them. This further reduces the risk of leaks and burns from contact with extremely cold gases such as liquified petroleum (LP). The socket swivels, so you won’t have to twist your hose to attach the plug. Made of stainless steel, these couplings resist corrosion from harsh chemicals and salt water.
A complete coupling consists of a plug and a socket (both sold separately).
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 360 psi @ 72° F
- Temperature Range: -40° to 400° F
- Compatible With Manufacturer: MannTek