Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.

Fill the void beneath motors, pumps, and other large machinery to create a structural support for your equipment. Also known as chocking epoxies, these epoxies replace traditional metal chocks, which often need to be machined. Mix these two-part epoxies and pour them in between your equipment and your base—they flow into every nook and cranny for a strong, long-lasting bond. As these epoxies cure, they won’t shrink. Designed to withstand demanding environments, these epoxies handle heavy loads, vibration, and chemicals without cracking. Especially good for harsh marine applications, you can use them when installing marine engines and deck-supported equipment, such as hoists and winches.

Stop slow-flowing and weeping leaks in concrete. These crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a dispensing gun (sold separately). The size listed is the combined total of the two parts. A mixer nozzle is included.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Fill cracks up to 4" deep on horizontal surfaces such as floors and sidewalks. These epoxies are shrink, impact, and chemical resistant, and can also be used on wood, fiberglass, and metal surfaces. Use the cartridges with a standard caulk gun (sold separately) for dispensing.