Filter by
For Cutting
Cutting Pattern
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Portable Long-Cut Bench-Top Sheet Metal-Cutting Shears
For Use On Aluminum, Brass, Copper, Plastic, Steel, Tin
 |
Shears | Replacement Upper Blades | Replacement Lower Blades | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | ||||||||||||||||||||
Cut Lg. | Steel | Aluminum | Tin | Brass | Copper | Plastic | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Wt., lb. | Sharpenable | Each | Each | Each | |||||
| 12" | 0.015" | 0.03" | 0.015" | 0.02" | 0.015" | 0.062" | Steel | Aluminum, Steel | 14 1/2" | 11" | 25" | 17 1/4" | 40 | Yes | 86745T51 | 0000000 | 86745T52 | 0000000 | 86745T53 | 0000000 | ||
For Use On Aluminum, Brass, Copper, Steel, Tin
 |
Adjustable Stop |
Adjustable Stop—Cutters with an adjustable stop can make repeat cuts up to 6” long.
Shears | Replacement Upper Blades | Replacement Lower Blades | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | |||||||||||||||||||
Cut Lg. | Steel | Aluminum | Tin | Brass | Copper | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Wt., lb. | Sharpenable | Each | Each | Each | |||||
Adjustable Stop | |||||||||||||||||||||
| 12" | 0.02" | 0.05" | 0.025" | 0.025" | 0.025" | Steel | Steel | 14 3/8" | 19" | 15 5/8" | 15" | 28 | Yes | 86745T101 | 0000000 | 86745T105 | 0000000 | 86745T104 | 0000000 | ||
Sheet Metal Notchers
 |  |
Notches Shown on Sheet Metal |
Cut up to 1" deep V-shaped notches in sheet metal.
For Max. Thk. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Notch Angle | Notch Dp. | Overall Lg. | Steel | Stainless Steel | Aluminum | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Each | |||
For Use On Aluminum, Stainless Steel, and Steel | ||||||||||||||
| 32° | 13/16" | 9" | 1/32" | 1/64" | 1/32" | Steel | Steel | Black | Rubber | Manual | 2448A11 | 0000000 | ||
Smooth-Edge Electric Sheet Metal-Cutting Shears
 |
 |  |
Style A | Style B |
 |
Cutting Pattern - Straight, Right Curves, Left Curves |
Shears | Replacement Blades | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Electrical | ||||||||||||||||||||||
Style | Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Blade Material | Overall Lg. | No-Load Strokes per min., stroke/min | Starting Hole Dia. | Voltage | Current, amp | Cord Lg., ft. | Connection | No. of Blades | Specs. Met | Certification | Includes | Each | Each | ||||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||||||||||
| A | 1/16" | 3/64" | 3/32" | 7/32" | 7" | Steel | 14" | 2,500 | 1/2" | 120V AC | 5 | 8 | Straight Blade | 2 | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302 | CSA Certified, UL Listed | Lubricant, Head-Adjusting Wrench | 3717A16 | 0000000 | 3717A22 | 000000 | ||
For Use On Aluminum, Steel | |||||||||||||||||||||||
| B | 3/64" | 1/32" | 3/64" | 7/32" | 4 1/2" | Steel | 15 1/2" | 2,450 | 7/32" | 20V DC | — | — | — | — | — | CSA Certified | Two Batteries, Battery Charger, Bag, Hex Wrench | 7080A34 | 000000 | ——— | 0 | ||
Straight-Cutting Bench-Mount Sheet Metal-Cutting Shears
 |
Make straight, clean cuts in thick sheet metal.
Shears | Replacement Blades | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | Mounting Holes | ||||||||||||||||
Steel | Stainless Steel | Cut Lg. | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Wt., lb. | Sharpenable | No. of | Dia. | Fasteners Included | Each | Pair | ||||
Cutting Pattern—Straight | |||||||||||||||||||
For Use On Stainless Steel, Steel, Rubber, Leather | |||||||||||||||||||
| 1/8" | 1/16" | 2 1/2" | Steel | Steel | 8" | 8" | 3 1/4" | 20" | 11 | Yes | 2 | 1/2" | No | 3788A2 | 0000000 | 3788A15 | 0000000 | ||
| 3/16" | 1/8" | 2 1/2" | Steel | Steel | 11" | 13" | 3 3/4" | 30" | 25 | Yes | 2 | 1/2" | No | 3788A3 | 000000 | 3788A16 | 000000 | ||
Notch-Cutting Bench-Mount Sheet Metal-Cutting Shears
 |
Notch, cut, and pierce a variety of materials including metal, plastic, and vinyl. These versatile cutters have an adjustable stroke length for piercing and knockout operations.
Shears | Replacement Blades | Floor Stands | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | For Max. Thk. | Mounting Holes | ||||||||||||||||||||||||
Notch Angle | Notch Dp. | Lg. | Ht. | Wd. | Steel | Stainless Steel | Aluminum | Tin | Brass | Copper | Iron | Nickel | Handle Lg. | Wt., lb. | No. of | Dia. | Fasteners Included | Blade Material | Each | Each | Each | |||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||||||||||||||
| 90° | 4 1/4" | 19" | 15" | 18" | 3/64" | 3/64" | 5/64" | 1/16" | 1/16" | 1/16" | 3/64" | 3/64" | 22 1/4" | 170 | 4 | 1/2" | No | Steel | 3803A8 | 000000000 | 3803A9 | 0000000 | 3803A91 | 0000000 | ||
Curve-Cutting Bench-Mount Sheet Metal-Cutting Shears
 |  | |
Fixed Blade | Rotating Blade | Cutting Pattern - Straight, Right Curves, Left Curves |
Turn your workpiece while cutting to create curves and complex shapes.
Rotating Blade—Cutters with rotating blades have two blades that turn to cut your material where they meet. When cutting curves, they make cleaner and smoother cuts than cutters with fixed blades.
Shears | Replacement Blades | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | Mounting Holes | |||||||||||||||||||
Cut Lg. | Steel | Stainless Steel | Aluminum | Blade Diameter | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Wt., lb. | Sharpenable | No. of | Dia. | Fasteners Included | Each | Each | Pair | ||||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||||||||
Fixed Blade | ||||||||||||||||||||||
| 3" | 1/16" | 3/64" | 1/16" | — | Steel | Steel | 7" | 14" | 9" | 18" | 18 | Yes | 3 | 1/2" | No | 3796A2 | 0000000 | 3796A6 | 0 | 0000000 | ||
| 3 1/8" | 1/8" | 1/16" | 1/8" | — | Steel | Steel | 9" | 15" | 10" | 24" | 35 | Yes | 3 | 1/2" | No | 3796A3 | 00000000 | 3796A7 | 0 | 000000 | ||
| 4 1/4" | 3/16" | 1/8" | 3/16" | — | Steel | Steel | 9" | 15" | 14" | 30" | 58 | Yes | 3 | 1/2" | No | 3796A4 | 00000000 | 3796A8 | 0 | 000000 | ||
Rotating Blade | ||||||||||||||||||||||
| — | 1/16" | 3/64" | 1/16" | 2 1/2" | Steel | Cast Iron | 8" | 12" | 7" | 16" | 49 | No | 4 | 1/2" | No | 3796A101 | 000000 | 3796A102 | 0000000 | 0 | ||
Long-Cut Bench-Top Sheet Metal-Cutting Shears
 |
This large-capacity cutter has a 25" blade for long, straight cuts.
For Max. Thk. | Material | Overall | Work Surface | Max. Gauge Reading | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cut Lg. | Steel | Stainless Steel | Aluminum | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Lg. | Wd. | Wt., lb. | Sharpenable | Front | Back | Includes | Each | |||
Cutting Pattern—Straight | ||||||||||||||||||||
For Use On Aluminum, Brass, Plastic, Stainless Steel, Steel | ||||||||||||||||||||
| 25" | 3/64" | 3/64" | 3/64" | Steel | Steel | 39" | 37" | 30 3/4" | 31" | 11 13/16" | 25 7/8" | 290 | Yes | 21" | 9 1/2" | Back Gauge, Front Gauge, Material Hold-Down Clamp | 36665A16 | 000000000 | ||
Air-Powered Sheet Metal-Cutting Shears for Pliable Metal
 | |
Cutting Pattern - Straight, Right Curves, Left Curves |
For Max. Thk. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wire Cloth | Plastic | Blade Material | Overall Lg. | No-Load Strokes per min., stroke/min | Air Consumption, ft³/min | Air Pressure, psi | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||
For Use On Aluminum, Brass, Bronze, Copper, Foam, Nickel, Plastic, Rubber, Stainless Steel, Steel | |||||||||||||||
| 3/64" | 1/8" | Steel | 12" | 2,500 | 4 | 90 | 1/4" to 1/2" | No | NPT | 1/4 | Female | 38185A14 | 0000000 | ||
Sheet Metal-Cutting Drill Attachments
 | |
Drill Not Included | Cutting Pattern - Straight, Right Curves, Left Curves |
Convert your drill into a sheet metal cutter to make quick, low-effort cuts without a separate power tool. Insert the bit on these attachments into your chuck to power the jaws, then slide the telescoping clamp over the drill body to hold them in place. They’re quick to install and remove, so you can switch between cutting and drilling. These attachments have a rotating collar that can turn the cutting head 360° to make cuts at any angle.
Also known as scissor-blade shears, these attachments have a bottom blade that stays in place while the upper blade moves up and down, making clean cuts without deforming edges. If your tool runs at multiple speeds, the jaws do too. Choose a slow speed for curves and corners, or a fast speed for quick, straight cuts. To extend the life of the blades, adjust the clearance between the cutting jaws to suit the thickness of the material you’re cutting.
Made from lightweight aluminum and plastic, these attachments won’t weigh down your tool, so you can make one-handed cuts. Both the width and length of the clamp are adjustable, so they can fit around most corded or cordless drills, including impact drivers. Tighten onto your drill with a thumb screw. They also include spacers for extending the clamp to fit over large drills.
For Max. Thk. | Material | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Steel | Stainless Steel | Aluminum | Copper | Blade | Housing | For Max. Drill Speed, rpm | For Drill Chuck Size Range | For Min. Drill Voltage | For Max. Drill Current, amp | For Min. Drill Torque, in·lbf | Operating Temp. Range, ° F | Features | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves, Square | ||||||||||||||||
For Use On Aluminum, Copper, Stainless Steel, Steel | ||||||||||||||||
| 3/64" | 1/32" | 1/16" | 7/64" | Steel | Aluminum | 2,900 | 1/4" to 1/2" | 100V AC, 14V DC | 7 | 300 | 32 to 100 | Rotating Collar, Telescoping Clamp | 7454N11 | 0000000 | ||
Floor-Mount Sheet Metal-Cutting Shears
 |
Make straight cuts in sheets. These cutters are foot operated so your hands are free to position the material.
Shears | Replacement Blades | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | Extension Arm Lg. | Max. Gauge Reading | |||||||||||||||||||
Cut Lg. | Steel | Stainless Steel | Aluminum | Tin | Brass | Copper | Iron | Nickel | Plastic | Blade | Frame | Ht. | Wd. | Front | Back | Front | Back | Each | Pair | ||||
Cutting Pattern—Straight | |||||||||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||||||||||||
| 37" | 3/64" | 1/32" | 5/64" | 1/16" | 1/16" | 1/16" | 3/64" | 1/32" | 1/16" | Steel | Cast Iron | 42" | 27" | 30" | 30" | 37" | 30" | 3809A2 | 000000000 | 3809A11 | 0000000 | ||
| 52 1/4" | 3/64" | 1/32" | 5/64" | 1/16" | 1/16" | 1/16" | 3/64" | 1/32" | 1/16" | Steel | Cast Iron | 42" | 36" | 30" | 30" | 37" | 30" | 3809A4 | 00000000 | 3809A12 | 00000000 | ||
Portable Straight-Cutting Bench-Top Sheet Metal-Cutting Shears
 |
Move these lightweight cutters wherever you need to make clean, straight cuts through metal. They’re supported by a sturdy front leg and a long back edge for stability on uneven surfaces.
Shears | Replacement Upper Blades | Replacement Lower Blades | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | Material | Overall | |||||||||||||||||||
Cut Lg. | Steel | Aluminum | Tin | Brass | Copper | Blade | Frame | Lg. | Ht. | Wd. | Handle Lg. | Wt., lb. | Sharpenable | Each | Each | Each | |||||
Cutting Pattern—Straight | |||||||||||||||||||||
For Use On Aluminum, Brass, Copper, Steel, Tin | |||||||||||||||||||||
| 4" | 0.025" | 0.05" | 0.03" | 0.025" | 0.025" | Steel | Aluminum, Steel | 18" | 6 1/2" | 10" | 14" | 11 | Yes | 7427N14 | 0000000 | 7427N16 | 0000000 | 7427N15 | 0000000 | ||
Electric Sheet Metal-Cutting Shears
 |  | |
Style A | Style B | Cutting Pattern - Straight, Right Curves, Left Curves |
For Max. Thk. | Material | Electrical | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Steel | Stainless Steel | Aluminum | Min. Cut Radius | Blade | Housing | Overall Lg. | No-Load Strokes per min., stroke/min | Voltage, V AC | Current, amp | Cord Lg., ft. | Connection | No. of Blades | Certification | Cannot Be Sold To | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||||||
| A | 3/64" | 3/64" | 3/64" | 1 1/8" | Steel | Plastic | 12 1/2" | 4,000 | 120 | 3.3 | 8 | Straight Blade | 2 | UL Listed | Outside United States | 38005A82 | 0000000 | ||
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel, Tin | |||||||||||||||||||
| B | 9/64" | 1/16" | 5/32" | 2" | Steel | Plastic | 8 3/8" | 1,600 | 120 | 6.2 | 8 | Straight Blade | 2 | CSA Certified, CSA-US Certified | Outside United States | 3834A75 | 000000 | ||
Air-Powered Sheet Metal-Cutting Shears
 |  | |
Style A | Style B | Cutting Pattern - Straight, Right Curves, Left Curves |
Also known as slotting shears, these cutters have a double blade that creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. To start cuts in the center of material, drill a starting hole.
Shears | Replacement Blades | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thk. | ||||||||||||||||||
Style | Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per min., stroke/min | Starting Hole Dia. | Air Consumption, ft³/min | Air Pressure, psi | Includes | Each | Each | ||||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||||||
| A | 3/64" | 1/32" | 3/64" | 7/32" | 6" | 10" | Steel | 2,500 | 1/2" | 4 | 90 | Wrench, Lubricant | 3622A21 | 0000000 | ——— | 0 | ||
| B | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 10 1/2" | Steel | 2,200 | 1/2" | 4 | 90 | Wrench, Lubricant | 3717A19 | 000000 | 3717A22 | 000000 | ||
Air-Powered Sheet Metal-Cutting Shears for Thin Metal
 | |
Cutting Pattern - Straight, Right Curves, Left Curves |
For Max. Thk. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Steel | Aluminum | Min. Cut Radius | Blade Material | Overall Lg. | No-Load Strokes per min., stroke/min | Air Consumption, ft³/min | Air Pressure, psi | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||||||
| 1/64" | 1/64" | 7" | Steel | 11" | 2,200 | 4 | 90 | 1/4" to 1/2" | No | NPT | 1/4 | Female | 3818A19 | 0000000 | ||
Electric Sheet Metal-Cutting Shears for Pliable Metal
 | |
Cutting Pattern - Straight, Right Curves, Left Curves |
For Max. Thk. | Electrical | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cut Lg. | Wire Cloth | Plastic | Blade Material | Overall Lg. | No-Load Strokes per min., stroke/min | Voltage, V AC | Current, amp | Cord Lg., ft. | Connection | No. of Blades | Certification | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||
For Use On Aluminum, Brass, Bronze, Copper, Foam, Nickel, Plastic, Rubber, Stainless Steel, Steel | |||||||||||||||
| 2 1/4" | 3/64" | 1/8" | Steel | 16" | 2,500 | 120 | 5 | 8 | Straight Blade | 2 | C-UL Listed, UL Listed | 38185A16 | 0000000 | ||
Electric Sheet Metal-Cutting Shears for Thin Metal
 | |
Cutting Pattern - Straight, Right Curves, Left Curves |
For Max. Thk. | Electrical | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Steel | Aluminum | Min. Cut Radius | Blade Material | Overall Lg. | No-Load Strokes per min., stroke/min | Switch Type | Voltage, V AC | Current, amp | Cord Lg., ft. | Connection | No. of Blades | Specs. Met | Certification | Each | |||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | |||||||||||||||||
| 1/64" | 1/64" | 7" | Steel | 16" | 2,500 | Variable-Speed Trigger | 120 | 5 | 8 | Straight Blade | 2 | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302 | CSA Certified, UL Listed | 3818A18 | 0000000 | ||
