Full Cone Misting Nozzles

Filter by

Product Family

Spray Nozzles

Spray Pattern

Full Cone

Hollow Cone

System of Measurement

Pipe Size

Material

Flow Rate @ 40 psi

Spray Application

Orifice Diameter

Gender

Thread Type

For Use With

Maximum Pressure

Spray Angle

Fitting Connection

Connects To

Flow Rate @ 100 psi

Maximum Temperature

Overall Width

Width

Tip Type

RoHS

Compliant with Exemptions

Droplet Size

20 μm to 60 μm

60 μm to 200 μm

Spray Direction

Straight

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

REACH

25 Products

About Pipe Size and Spray Nozzles

Full Cone

These nozzles provide small, atomized spray droplets for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. All are easy to clean and have a strainer.

Brass nozzles have good corrosion resistance.

416 stainless steel nozzles are stronger than brass nozzles and offer mild corrosion resistance.

Flow Rate, gph								Strainer					Each
@ 40 psi	@ 100 psi	@ 500 psi	Orifice Dia.	Overall Wd.	Lg.	Max. Pressure, psi	Max. Temp., °F	Body Material	Mesh Material	Mesh Size	Spray Angle		1-9	10-49	50-Up
Brass
1/8 NPT Male
0.63	1	2.24	0.01"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K61	000000	000000	000000
1.26	2	4.47	0.01"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K62	00000	00000	00000
1.9	3	6.71	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K63	00000	00000	00000
2.53	4	8.94	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K74	00000	00000	00000
3.16	5	11.18	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K75	00000	00000	00000
6.32	10	22.36	0.03"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K76	00000	00000	00000
9.49	15	33.54	0.04"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K77	00000	00000	00000
416 Stainless Steel
1/8 NPT Male
0.63	1	2.24	0.01"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K41	00000	00000	00000
1.26	2	4.47	0.01"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K42	00000	00000	00000
1.9	3	6.71	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K43	00000	00000	00000
2.53	4	8.94	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K44	00000	00000	00000
3.16	5	11.18	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K45	00000	00000	00000
4.43	7	15.65	0.02"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K11	00000	00000	00000
9.49	15	33.54	0.04"	7/16"	1 1/8"	500	180°	Brass	Stainless Steel	120 × 120	80°	3178K47	00000	00000	00000

Full-Cone No-Drip Misting Nozzles

Female Threaded

Male Threaded

Full Cone

O-Ring

A check valve prevents the nozzle from dripping when it is turned off. All have a strainer. They provide small, atomized spray droplets for cooling, moistening, and humidifying applications. They're also a good choice for applying coatings and dust control. Made from 303 stainless steel, they're chemical, corrosion, and abrasion resistant.

Nozzles
Flow Rate, gph									Liquid Filter				Each			Replacement O-Rings
@ 100 psi	@ 500 psi	Orifice Dia.	Overall Wd.	Lg.	Max. Pressure, psi	Max. Temp., °F	Check Valve Closing Pressure, psi	Body Material	Particle Size, microns	Material	Spray Angle		1-9	10-49	50-Up		Each
303 Stainless Steel
1/8 NPT Female
0.59	1.31	0.01"	3/4"	2"	500	180°	65	Brass	31-41	Bronze	70°	32215K11	000000	000000	000000	32215K36	00000
1/8 NPT Male
0.59	1.31	0.01"	3/4"	2"	500	180°	65	Brass	31-41	Bronze	70°	32215K33	00000	00000	00000	32215K36	0000
1/4 NPT Female
0.59	1.31	0.01"	3/4"	2"	500	180°	65	Brass	31-41	Bronze	70°	32215K12	00000	00000	00000	32215K36	0000
1/4 NPT Male
0.59	1.31	0.01"	3/4"	2 1/8"	500	180°	65	Brass	31-41	Bronze	70°	32215K34	00000	00000	00000	32215K36	0000
3/8 NPT Male
0.59	1.31	0.01"	3/4"	2"	500	180°	65	Brass	31-41	Bronze	70°	32215K35	00000	00000	00000	32215K36	0000
10-24 UNC Male
0.59	1.31	0.01"	11/16"	1 5/16"	500	180°	65	Brass	31-41	Bronze	70°	32215K31	00000	00000	00000	32215K36	0000

Full-Cone Ultra-Fine Air-Powered Misting and Fogging Nozzles

Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles. Use them for mist coating, evaporative cooling, moisturizing, and spray drying. They have a knob to control the flow rate. Made from brass, they have good corrosion resistance.

Nozzles with droplet sizes of 20 microns to 60 microns are good for moisturizing, coating, evaporative cooling, and dust suppression.

Nozzles with droplet sizes of 60 microns to 200 microns are good for washing and applying lubricants.

Nozzle kits include a nozzle, Y-strainer, and air filter, giving you all the components you need to build a spraying system.

Nozzles

Full Cone

Brass
Droplet Size, microns	Flow Rate, gph	Orifice Dia.	Overall Wd.	Lg.	Max. Pressure, psi	Air Pressure Range, psi	Max. Temp., °F	Spray Angle		Each
1/4 NPT Female
20-60	6-30	0.04"	2 5/16"	4 1/4"	20	70-100	200°	10°-21°	3117K22	0000000
60-200	6-30	0.08"	2 5/16"	4 1/4"	20	70-100	200°	10°-21°	3117K23	000000

Nozzle Kits

Full Cone

									Strainer
Droplet Size, microns	Flow Rate, gph	Orifice Dia.	Overall Wd.	Lg.	Max. Pressure, psi	Air Pressure Range, psi	Max. Temp., °F	Air Filter Particle Size, microns	Material	Mesh Size	Spray Angle	Includes		Each
Brass
1/4 NPT Female
20-60	6-30	0.04"	2 5/16"	4 1/4"	20	70-100	200°	5	Bronze	40 × 40	10°-21°	5-micron Air Filter with Automatic Drain, Liquid Y-Strainer	3117K21	0000000
60-200	6-30	0.08"	2 5/16"	4 1/4"	20	70-100	200°	5	Bronze	40 × 40	10°-21°	5-micron Air Filter with Automatic Drain, Liquid Y-Strainer	3117K24	000000

About Pipe Size and Spray Nozzles

Full-Cone Misting Nozzles

Full-Cone No-Drip Misting Nozzles

Full-Cone Ultra-Fine Air-Powered Misting and Fogging Nozzles