McMaster-Carr logo
    Filter by
    System of Measurement
    Flute Direction
    Flute Type
    Number of Flutes
    Number of Pieces
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Specifications Met
    Container Length
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    1,415 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    80 Ga.
    0.0135"
    3/4"0.1"Round
    0.0135"Standard
    0000000000000
    79 Ga.
    0.0145"
    3/4"0.1"Round
    0.0145"Standard
    000000000000
    78 Ga.
    0.016"
    7/8"0.16"Round
    0.016"Standard
    000000000000
    77 Ga.
    0.018"
    7/8"0.16"Round
    0.018"Standard
    000000000000
    76 Ga.
    0.02"
    7/8"0.15"Round
    0.02"Standard
    000000000000
    75 Ga.
    0.021"
    1"0.21"Round
    0.021"Standard
    000000000000
    74 Ga.
    0.0225"
    1"0.21"Round
    0.0225"Standard
    000000000000
    73 Ga.
    0.024"
    1 1/8"0.27"Round
    0.024"Standard
    000000000000
    72 Ga.
    0.025"
    1 1/8"0.27"Round
    0.025"Standard
    000000000000
    71 Ga.
    0.026"
    1 1/4"0.33"Round
    0.026"Standard
    000000000000
    70 Ga.
    0.028"
    1 1/4"0.33"Round
    0.028"Standard
    000000000000
    69 Ga.
    0.0292"
    1 3/8"0.45"Round
    0.0292"Standard
    000000000000
    68 Ga.
    0.031"
    1 3/8"0.45"Round
    0.031"Standard
    000000000000
    67 Ga.
    0.032"
    1 3/8"0.45"Round
    0.032"Standard
    000000000000
    66 Ga.
    0.033"
    1 3/8"0.45"Round
    0.033"Standard
    000000000000
    65 Ga.
    0.035"
    1 1/2"0.57"Round
    0.035"Standard
    000000000000
    64 Ga.
    0.036"
    1 1/2"0.57"Round
    0.036"Standard
    000000000000
    63 Ga.
    0.037"
    1 1/2"0.57"Round
    0.037"Standard
    000000000000
    62 Ga.
    0.038"
    1 1/2"0.56"Round
    0.038"Standard
    000000000000
    61 Ga.
    0.039"
    1 5/8"0.62"Round
    0.039"Standard
    000000000000
    60 Ga.
    0.04"
    1 5/8"0.62"Round
    0.04"Standard
    000000000000
    59 Ga.
    0.041"
    1 5/8"0.62"Round
    0.041"Standard
    000000000000
    58 Ga.
    0.042"
    1 5/8"0.62"Round
    0.042"Standard
    000000000000
    57 Ga.
    0.043"
    1 3/4"0.68"Round
    0.043"Standard
    000000000000
    56 Ga.
    0.0465"
    1 3/4"0.68"Round
    0.0465"Standard
    000000000000
    55 Ga.
    0.052"
    1 7/8"0.79"Round
    0.052"Standard
    000000000000
    54 Ga.
    0.055"
    1 7/8"0.79"Round
    0.055"Standard
    000000000000
    53 Ga.
    0.0595"
    1 7/8"0.78"Round
    0.0595"Standard
    000000000000
    52 Ga.
    0.0635"
    1 7/8"0.78"Round
    0.0635"Split
    000000000000
    51 Ga.
    0.067"
    2"0.9"Round
    0.067"Split
    000000000000
    50 Ga.
    0.07"
    2"0.89"Round
    0.07"Split
    000000000000
    49 Ga.
    0.073"
    2"0.89"Round
    0.073"Split
    000000000000
    48 Ga.
    0.076"
    2"0.88"Round
    0.076"Split
    000000000000
    47 Ga.
    0.0785"
    2"0.88"Round
    0.0785"Split
    000000000000
    46 Ga.
    0.081"
    2 1/8"1"Round
    0.081"Split
    000000000000
    45 Ga.
    0.082"
    2 1/8"1"Round
    0.082"Split
    000000000000
    44 Ga.
    0.086"
    2 1/8"0.99"Round
    0.086"Split
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.11"Round
    0.089"Split
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.11"Round
    0.0935"Split
    000000000000
    41 Ga.
    0.096"
    2 3/8"1.23"Round
    0.096"Split
    000000000000
    40 Ga.
    0.098"
    2 3/8"1.22"Round
    0.098"Split
    000000000000
    39 Ga.
    0.0995"
    2 3/8"1.22"Round
    0.0995"Split
    000000000000
    38 Ga.
    0.1015"
    2 1/2"1.28"Round
    0.1015"Split
    000000000000
    37 Ga.
    0.104"
    2 1/2"1.28"Round
    0.104"Split
    000000000000
    36 Ga.
    0.1065"
    2 1/2"1.27"Round
    0.1065"Split
    00000000000
    35 Ga.
    0.11"
    2 5/8"1.33"Round
    0.11"Split
    000000000000
    34 Ga.
    0.111"
    2 5/8"1.33"Round
    0.111"Split
    000000000000
    33 Ga.
    0.113"
    2 5/8"1.33"Round
    0.113"Split
    000000000000
    32 Ga.
    0.116"
    2 3/4"1.45"Round
    0.116"Split
    000000000000
    31 Ga.
    0.12"
    2 3/4"1.44"Round
    0.12"Split
    000000000000
    30 Ga.
    0.1285"
    2 3/4"1.43"Round
    0.1285"Split
    000000000000
    29 Ga.
    0.136"
    2 7/8"1.54"Round
    0.136"Split
    000000000000
    28 Ga.
    0.1405"
    2 7/8"1.53"Round
    0.1405"Split
    000000000000
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Split
    000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Split
    000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"Round
    0.152"Split
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"Round
    0.154"Split
    000000000000
    22 Ga.
    0.157"
    3 1/8"1.76"Round
    0.157"Split
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"Round
    0.159"Split
    000000000000
    20 Ga.
    0.161"
    3 1/4"1.88"Round
    0.161"Split
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"Round
    0.166"Split
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"Round
    0.1695"Split
    000000000000
    17 Ga.
    0.173"
    3 3/8"1.92"Round
    0.173"Split
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"Round
    0.177"Split
    000000000000
    15 Ga.
    0.18"
    3 3/8"1.91"Round
    0.18"Split
    000000000000
    14 Ga.
    0.182"
    3 3/8"1.91"Round
    0.182"Split
    000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"Round
    0.185"Split
    000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"Round
    0.189"Split
    000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"Round
    0.191"Split
    000000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"Round
    0.1935"Split
    000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"Round
    0.196"Split
    000000000000
    8 Ga.
    0.199"
    3 5/8"2.13"Round
    0.199"Split
    000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"Round
    0.201"Split
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"Round
    0.204"Split
    000000000000
    5 Ga.
    0.2055"
    3 3/4"2.19"Round
    0.2055"Split
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"Round
    0.209"Split
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"Round
    0.213"Split
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"Round
    0.221"Split
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"Round
    0.228"Split
    000000000000
     
    Titanium Nitride (TiN) Coated
    80 Ga.
    0.0135"
    3/4"0.1"Round
    0.0135"Standard
    0000000000000
    79 Ga.
    0.0145"
    3/4"0.1"Round
    0.0145"Standard
    0000000000000
    78 Ga.
    0.016"
    7/8"0.16"Round
    0.016"Standard
    0000000000000
    77 Ga.
    0.018"
    7/8"0.16"Round
    0.018"Standard
    0000000000000
    76 Ga.
    0.02"
    7/8"0.15"Round
    0.02"Standard
    0000000000000
    75 Ga.
    0.021"
    1"0.21"Round
    0.021"Standard
    0000000000000
    74 Ga.
    0.0225"
    1"0.21"Round
    0.0225"Standard
    0000000000000
    73 Ga.
    0.024"
    1 1/8"0.27"Round
    0.024"Standard
    0000000000000
    72 Ga.
    0.025"
    1 1/8"0.27"Round
    0.025"Standard
    0000000000000
    71 Ga.
    0.026"
    1 1/4"0.33"Round
    0.026"Standard
    0000000000000
    70 Ga.
    0.028"
    1 1/4"0.33"Round
    0.028"Standard
    0000000000000
    69 Ga.
    0.0292"
    1 3/8"0.45"Round
    0.0292"Standard
    0000000000000
    68 Ga.
    0.031"
    1 3/8"0.45"Round
    0.031"Standard
    0000000000000
    67 Ga.
    0.032"
    1 3/8"0.45"Round
    0.032"Standard
    0000000000000
    66 Ga.
    0.033"
    1 3/8"0.45"Round
    0.033"Standard
    0000000000000
    65 Ga.
    0.035"
    1 1/2"0.57"Round
    0.035"Standard
    0000000000000
    64 Ga.
    0.036"
    1 1/2"0.57"Round
    0.036"Standard
    0000000000000
    63 Ga.
    0.037"
    1 1/2"0.57"Round
    0.037"Standard
    0000000000000
    62 Ga.
    0.038"
    1 1/2"0.56"Round
    0.038"Standard
    0000000000000
    61 Ga.
    0.039"
    1 5/8"0.62"Round
    0.039"Standard
    0000000000000
    60 Ga.
    0.04"
    1 5/8"0.62"Round
    0.04"Standard
    0000000000000
    59 Ga.
    0.041"
    1 5/8"0.62"Round
    0.041"Standard
    0000000000000
    58 Ga.
    0.042"
    1 5/8"0.62"Round
    0.042"Standard
    0000000000000
    57 Ga.
    0.043"
    1 3/4"0.68"Round
    0.043"Standard
    0000000000000
    56 Ga.
    0.0465"
    1 3/4"0.68"Round
    0.0465"Standard
    0000000000000
    55 Ga.
    0.052"
    1 7/8"0.79"Round
    0.052"Standard
    0000000000000
    54 Ga.
    0.055"
    1 7/8"0.79"Round
    0.055"Standard
    0000000000000
    53 Ga.
    0.0595"
    1 7/8"0.78"Round
    0.0595"Standard
    0000000000000
    52 Ga.
    0.0635"
    1 7/8"0.78"Round
    0.0635"Split
    0000000000000
    51 Ga.
    0.067"
    2"0.9"Round
    0.067"Split
    0000000000000
    50 Ga.
    0.07"
    2"0.89"Round
    0.07"Split
    0000000000000
    49 Ga.
    0.073"
    2"0.89"Round
    0.073"Split
    0000000000000
    48 Ga.
    0.076"
    2"0.88"Round
    0.076"Split
    0000000000000
    47 Ga.
    0.0785"
    2"0.88"Round
    0.0785"Split
    0000000000000
    46 Ga.
    0.081"
    2 1/8"1"Round
    0.081"Split
    0000000000000
    45 Ga.
    0.082"
    2 1/8"1"Round
    0.082"Split
    0000000000000
    44 Ga.
    0.086"
    2 1/8"0.99"Round
    0.086"Split
    0000000000000
    43 Ga.
    0.089"
    2 1/4"1.11"Round
    0.089"Split
    0000000000000
    42 Ga.
    0.0935"
    2 1/4"1.11"Round
    0.0935"Split
    0000000000000
    41 Ga.
    0.096"
    2 3/8"1.23"Round
    0.096"Split
    0000000000000
    40 Ga.
    0.098"
    2 3/8"1.22"Round
    0.098"Split
    0000000000000
    39 Ga.
    0.0995"
    2 3/8"1.22"Round
    0.0995"Split
    0000000000000
    38 Ga.
    0.1015"
    2 1/2"1.28"Round
    0.1015"Split
    0000000000000
    37 Ga.
    0.104"
    2 1/2"1.28"Round
    0.104"Split
    0000000000000
    36 Ga.
    0.1065"
    2 1/2"1.27"Round
    0.1065"Split
    0000000000000
    35 Ga.
    0.11"
    2 5/8"1.33"Round
    0.11"Split
    0000000000000
    34 Ga.
    0.111"
    2 5/8"1.33"Round
    0.111"Split
    0000000000000
    33 Ga.
    0.113"
    2 5/8"1.33"Round
    0.113"Split
    0000000000000
    32 Ga.
    0.116"
    2 3/4"1.45"Round
    0.116"Split
    0000000000000
    31 Ga.
    0.12"
    2 3/4"1.44"Round
    0.12"Split
    0000000000000
    30 Ga.
    0.1285"
    2 3/4"1.43"Round
    0.1285"Split
    0000000000000
    29 Ga.
    0.136"
    2 7/8"1.54"Round
    0.136"Split
    0000000000000
    28 Ga.
    0.1405"
    2 7/8"1.53"Round
    0.1405"Split
    0000000000000
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Split
    0000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Split
    0000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Split
    0000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"Round
    0.152"Split
    0000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"Round
    0.154"Split
    0000000000000
    22 Ga.
    0.157"
    3 1/8"1.76"Round
    0.157"Split
    0000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"Round
    0.159"Split
    0000000000000
    20 Ga.
    0.161"
    3 1/4"1.88"Round
    0.161"Split
    0000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"Round
    0.166"Split
    0000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"Round
    0.1695"Split
    0000000000000
    17 Ga.
    0.173"
    3 3/8"1.92"Round
    0.173"Split
    0000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"Round
    0.177"Split
    0000000000000
    15 Ga.
    0.18"
    3 3/8"1.91"Round
    0.18"Split
    0000000000000
    14 Ga.
    0.182"
    3 3/8"1.91"Round
    0.182"Split
    0000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"Round
    0.185"Split
    0000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"Round
    0.189"Split
    0000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"Round
    0.191"Split
    0000000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"Round
    0.1935"Split
    0000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"Round
    0.196"Split
    0000000000000
    8 Ga.
    0.199"
    3 5/8"2.13"Round
    0.199"Split
    0000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"Round
    0.201"Split
    0000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"Round
    0.204"Split
    0000000000000
    5 Ga.
    0.2055"
    3 3/4"2.19"Round
    0.2055"Split
    0000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"Round
    0.209"Split
    0000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"Round
    0.213"Split
    0000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"Round
    0.221"Split
    0000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"Round
    0.228"Split
    0000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Split
    000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Split
    000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"Round
    0.152"Split
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"Round
    0.154"Split
    000000000000
    22 Ga.
    0.157"
    3 1/8"1.76"Round
    0.157"Split
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"Round
    0.159"Split
    000000000000
    20 Ga.
    0.161"
    3 1/4"1.88"Round
    0.161"Split
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"Round
    0.166"Split
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"Round
    0.1695"Split
    000000000000
    17 Ga.
    0.173"
    3 3/8"1.92"Round
    0.173"Split
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"Round
    0.177"Split
    000000000000
    15 Ga.
    0.18"
    3 3/8"1.91"Round
    0.18"Split
    000000000000
    14 Ga.
    0.182"
    3 3/8"1.91"Round
    0.182"Split
    000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"Round
    0.185"Split
    000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"Round
    0.189"Split
    000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"Round
    0.191"Split
    000000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"Round
    0.1935"Split
    000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"Round
    0.196"Split
    000000000000
    8 Ga.
    0.199"
    3 5/8"2.13"Round
    0.199"Split
    000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"Round
    0.201"Split
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"Round
    0.204"Split
    000000000000
    5 Ga.
    0.2055"
    3 3/4"2.19"Round
    0.2055"Split
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"Round
    0.209"Split
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"Round
    0.213"Split
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"Round
    0.221"Split
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"Round
    0.228"Split
    000000000000
     
    Uncoated
    90 Ga.
    0.0087"
    3/4"0.08"Round
    0.0087"Standard
    00000000000
    88 Ga.
    0.0094"
    3/4"0.08"Round
    0.0094"Standard
    00000000000
    80 Ga.
    0.0135"
    3/4"0.1"Round
    0.0135"Standard
    000000000000
    79 Ga.
    0.0145"
    3/4"0.1"Round
    0.0145"Standard
    000000000000
    78 Ga.
    0.016"
    7/8"0.16"Round
    0.016"Standard
    000000000000
    77 Ga.
    0.018"
    7/8"0.16"Round
    0.018"Standard
    000000000000
    76 Ga.
    0.02"
    7/8"0.15"Round
    0.02"Standard
    000000000000
    75 Ga.
    0.021"
    1"0.21"Round
    0.021"Standard
    000000000000
    74 Ga.
    0.0225"
    1"0.21"Round
    0.0225"Standard
    000000000000
    73 Ga.
    0.024"
    1 1/8"0.27"Round
    0.024"Standard
    000000000000
    72 Ga.
    0.025"
    1 1/8"0.27"Round
    0.025"Standard
    000000000000
    71 Ga.
    0.026"
    1 1/4"0.33"Round
    0.026"Standard
    000000000000
    70 Ga.
    0.028"
    1 1/4"0.33"Round
    0.028"Standard
    000000000000
    69 Ga.
    0.0292"
    1 3/8"0.45"Round
    0.0292"Standard
    000000000000
    68 Ga.
    0.031"
    1 3/8"0.45"Round
    0.031"Standard
    000000000000
    67 Ga.
    0.032"
    1 3/8"0.45"Round
    0.032"Standard
    000000000000
    66 Ga.
    0.033"
    1 3/8"0.45"Round
    0.033"Standard
    000000000000
    65 Ga.
    0.035"
    1 1/2"0.57"Round
    0.035"Standard
    000000000000
    64 Ga.
    0.036"
    1 1/2"0.57"Round
    0.036"Standard
    000000000000
    63 Ga.
    0.037"
    1 1/2"0.57"Round
    0.037"Standard
    000000000000
    62 Ga.
    0.038"
    1 1/2"0.56"Round
    0.038"Standard
    000000000000
    61 Ga.
    0.039"
    1 5/8"0.62"Round
    0.039"Standard
    000000000000
    60 Ga.
    0.04"
    1 5/8"0.62"Round
    0.04"Standard
    000000000000
    59 Ga.
    0.041"
    1 5/8"0.62"Round
    0.041"Standard
    000000000000
    58 Ga.
    0.042"
    1 5/8"0.62"Round
    0.042"Standard
    000000000000
    57 Ga.
    0.043"
    1 3/4"0.68"Round
    0.043"Standard
    000000000000
    56 Ga.
    0.0465"
    1 3/4"0.68"Round
    0.0465"Standard
    000000000000
    55 Ga.
    0.052"
    1 7/8"0.79"Round
    0.052"Standard
    000000000000
    54 Ga.
    0.055"
    1 7/8"0.79"Round
    0.055"Standard
    000000000000
    53 Ga.
    0.0595"
    1 7/8"0.78"Round
    0.0595"Standard
    000000000000
    52 Ga.
    0.0635"
    1 7/8"0.78"Round
    0.0635"Standard
    000000000000
    51 Ga.
    0.067"
    2"0.9"Round
    0.067"Standard
    000000000000
    50 Ga.
    0.07"
    2"0.89"Round
    0.07"Standard
    000000000000
    49 Ga.
    0.073"
    2"0.89"Round
    0.073"Standard
    000000000000
    48 Ga.
    0.076"
    2"0.88"Round
    0.076"Standard
    000000000000
    47 Ga.
    0.0785"
    2"0.88"Round
    0.0785"Standard
    000000000000
    46 Ga.
    0.081"
    2 1/8"1"Round
    0.081"Standard
    000000000000
    45 Ga.
    0.082"
    2 1/8"1"Round
    0.082"Standard
    000000000000
    44 Ga.
    0.086"
    2 1/8"0.99"Round
    0.086"Standard
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.11"Round
    0.089"Standard
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.11"Round
    0.0935"Standard
    000000000000
    41 Ga.
    0.096"
    2 3/8"1.23"Round
    0.096"Standard
    000000000000
    40 Ga.
    0.098"
    2 3/8"1.22"Round
    0.098"Standard
    000000000000
    39 Ga.
    0.0995"
    2 3/8"1.22"Round
    0.0995"Standard
    000000000000
    38 Ga.
    0.1015"
    2 1/2"1.28"Round
    0.1015"Standard
    000000000000
    37 Ga.
    0.104"
    2 1/2"1.28"Round
    0.104"Standard
    000000000000
    36 Ga.
    0.1065"
    2 1/2"1.27"Round
    0.1065"Standard
    000000000000
    35 Ga.
    0.11"
    2 5/8"1.33"Round
    0.11"Standard
    000000000000
    34 Ga.
    0.111"
    2 5/8"1.33"Round
    0.111"Standard
    000000000000
    33 Ga.
    0.113"
    2 5/8"1.33"Round
    0.113"Standard
    000000000000
    32 Ga.
    0.116"
    2 3/4"1.45"Round
    0.116"Standard
    000000000000
    31 Ga.
    0.12"
    2 3/4"1.44"Round
    0.12"Standard
    000000000000
    30 Ga.
    0.1285"
    2 3/4"1.43"Round
    0.1285"Standard
    000000000000
    29 Ga.
    0.136"
    2 7/8"1.54"Round
    0.136"Standard
    000000000000
    28 Ga.
    0.1405"
    2 7/8"1.53"Round
    0.1405"Standard
    000000000000
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Standard
    000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Standard
    000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Standard
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"Round
    0.152"Standard
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"Round
    0.154"Standard
    000000000000
    22 Ga.
    0.157"
    3 1/8"1.76"Round
    0.157"Standard
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"Round
    0.159"Standard
    000000000000
    20 Ga.
    0.161"
    3 1/4"1.88"Round
    0.161"Standard
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"Round
    0.166"Standard
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"Round
    0.1695"Standard
    000000000000
    17 Ga.
    0.173"
    3 3/8"1.92"Round
    0.173"Standard
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"Round
    0.177"Standard
    000000000000
    15 Ga.
    0.18"
    3 3/8"1.91"Round
    0.18"Standard
    000000000000
    14 Ga.
    0.182"
    3 3/8"1.91"Round
    0.182"Standard
    000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"Round
    0.185"Standard
    000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"Round
    0.189"Standard
    000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"Round
    0.191"Standard
    000000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"Round
    0.1935"Standard
    000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"Round
    0.196"Standard
    000000000000
    8 Ga.
    0.199"
    3 5/8"2.13"Round
    0.199"Standard
    000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"Round
    0.201"Standard
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"Round
    0.204"Standard
    000000000000
    5 Ga.
    0.2055"
    3 3/4"2.19"Round
    0.2055"Standard
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"Round
    0.209"Standard
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"Round
    0.213"Standard
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"Round
    0.221"Standard
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"Round
    0.228"Standard
    000000000000
     

    Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-11
    12-Up
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    80 Ga.
    0.0135"
    3/4"0.13"Round
    0.0135"Standard
    0000000000000000000
    79 Ga.
    0.0145"
    3/4"0.13"Round
    0.0145"Standard
    00000000000000000
    78 Ga.
    0.016"
    7/8"0.19"Round
    0.016"Standard
    00000000000000000
    77 Ga.
    0.018"
    7/8"0.19"Round
    0.018"Standard
    00000000000000000
    76 Ga.
    0.02"
    7/8"0.19"Round
    0.02"Standard
    00000000000000000
    75 Ga.
    0.021"
    1"0.25"Round
    0.021"Standard
    00000000000000000
    74 Ga.
    0.0225"
    1"0.25"Round
    0.0225"Standard
    00000000000000000
    73 Ga.
    0.024"
    1 1/8"0.31"Round
    0.024"Standard
    00000000000000000
    72 Ga.
    0.025"
    1 1/8"0.31"Round
    0.025"Standard
    00000000000000000
    71 Ga.
    0.026"
    1 1/4"0.38"Round
    0.026"Standard
    00000000000000000
    70 Ga.
    0.028"
    1 1/4"0.38"Round
    0.028"Standard
    00000000000000000
    69 Ga.
    0.0292"
    1 3/8"0.5"Round
    0.0292"Standard
    00000000000000000
    68 Ga.
    0.031"
    1 3/8"0.5"Round
    0.031"Standard
    00000000000000000
    67 Ga.
    0.032"
    1 3/8"0.5"Round
    0.032"Standard
    00000000000000000
    66 Ga.
    0.033"
    1 3/8"0.5"Round
    0.033"Standard
    00000000000000000
    65 Ga.
    0.035"
    1 1/2"0.63"Round
    0.035"Standard
    00000000000000000
    64 Ga.
    0.036"
    1 1/2"0.63"Round
    0.036"Standard
    00000000000000000
    63 Ga.
    0.037"
    1 1/2"0.63"Round
    0.037"Standard
    00000000000000000
    62 Ga.
    0.038"
    1 1/2"0.63"Round
    0.038"Standard
    00000000000000000
    61 Ga.
    0.039"
    1 5/8"0.69"Round
    0.039"Standard
    00000000000000000
    60 Ga.
    0.04"
    1 5/8"0.69"Round
    0.04"Standard
    00000000000000000
    59 Ga.
    0.041"
    1 5/8"0.69"Round
    0.041"Standard
    00000000000000000
    58 Ga.
    0.042"
    1 5/8"0.69"Round
    0.042"Standard
    00000000000000000
    57 Ga.
    0.043"
    1 3/4"0.75"Round
    0.043"Standard
    00000000000000000
    56 Ga.
    0.0465"
    1 3/4"0.75"Round
    0.0465"Standard
    00000000000000000
    55 Ga.
    0.052"
    1 7/8"0.88"Round
    0.052"Standard
    00000000000000000
    54 Ga.
    0.055"
    1 7/8"0.88"Round
    0.055"Standard
    00000000000000000
    53 Ga.
    0.0595"
    1 7/8"0.88"Round
    0.0595"Standard
    00000000000000000
    52 Ga.
    0.0635"
    1 7/8"0.88"Round
    0.0635"Split
    00000000000000000
    51 Ga.
    0.067"
    2"1"Round
    0.067"Split
    00000000000000000
    50 Ga.
    0.07"
    2"1"Round
    0.07"Split
    00000000000000000
    49 Ga.
    0.073"
    2"1"Round
    0.073"Split
    00000000000000000
    48 Ga.
    0.076"
    2"1"Round
    0.076"Split
    00000000000000000
    47 Ga.
    0.0785"
    2"1"Round
    0.0785"Split
    00000000000000000
    46 Ga.
    0.081"
    2 1/8"1.13"Round
    0.081"Split
    00000000000000000
    45 Ga.
    0.082"
    2 1/8"1.13"Round
    0.082"Split
    00000000000000000
    44 Ga.
    0.086"
    2 1/8"1.13"Round
    0.086"Split
    00000000000000000
    43 Ga.
    0.089"
    2 1/4"1.25"Round
    0.089"Split
    00000000000000000
    42 Ga.
    0.0935"
    2 1/4"1.25"Round
    0.0935"Split
    00000000000000000
    41 Ga.
    0.096"
    2 3/8"1.38"Round
    0.096"Split
    00000000000000000
    40 Ga.
    0.098"
    2 3/8"1.38"Round
    0.098"Split
    00000000000000000
    39 Ga.
    0.0995"
    2 3/8"1.38"Round
    0.0995"Split
    00000000000000000
    38 Ga.
    0.1015"
    2 1/2"1.44"Round
    0.1015"Split
    00000000000000000
    37 Ga.
    0.104"
    2 1/2"1.44"Round
    0.104"Split
    00000000000000000
    36 Ga.
    0.1065"
    2 1/2"1.44"Round
    0.1065"Split
    00000000000000000
    35 Ga.
    0.11"
    2 5/8"1.5"Round
    0.11"Split
    00000000000000000
    34 Ga.
    0.111"
    2 5/8"1.5"Round
    0.111"Split
    00000000000000000
    33 Ga.
    0.113"
    2 5/8"1.5"Round
    0.113"Split
    00000000000000000
    32 Ga.
    0.116"
    2 3/4"1.63"Round
    0.116"Split
    00000000000000000
    31 Ga.
    0.12"
    2 3/4"1.63"Round
    0.12"Split
    00000000000000000
    30 Ga.
    0.1285"
    2 3/4"1.63"Round
    0.1285"Split
    00000000000000000
    29 Ga.
    0.136"
    2 7/8"1.75"Round
    0.136"Split
    00000000000000000
    28 Ga.
    0.1405"
    2 7/8"1.75"Round
    0.1405"Split
    00000000000000000
    27 Ga.
    0.144"
    3"1.88"Round
    0.144"Split
    00000000000000000
    26 Ga.
    0.147"
    3"1.88"Round
    0.147"Split
    00000000000000000
    25 Ga.
    0.1495"
    3"1.88"Round
    0.1495"Split
    00000000000000000
    24 Ga.
    0.152"
    3 1/8"2"Round
    0.152"Split
    00000000000000000
    23 Ga.
    0.154"
    3 1/8"2"Round
    0.154"Split
    00000000000000000
    22 Ga.
    0.157"
    3 1/8"2"Round
    0.157"Split
    00000000000000000
    21 Ga.
    0.159"
    3 1/4"2.13"Round
    0.159"Split
    00000000000000000
    20 Ga.
    0.161"
    3 1/4"2.13"Round
    0.161"Split
    00000000000000000
    19 Ga.
    0.166"
    3 1/4"2.13"Round
    0.166"Split
    00000000000000000
    18 Ga.
    0.1695"
    3 1/4"2.13"Round
    0.1695"Split
    00000000000000000
    17 Ga.
    0.173"
    3 3/8"2.19"Round
    0.173"Split
    00000000000000000
    16 Ga.
    0.177"
    3 3/8"2.19"Round
    0.177"Split
    00000000000000000
    15 Ga.
    0.18"
    3 3/8"2.19"Round
    0.18"Split
    00000000000000000
    14 Ga.
    0.182"
    3 3/8"2.19"Round
    0.182"Split
    00000000000000000
    13 Ga.
    0.185"
    3 1/2"2.31"Round
    0.185"Split
    00000000000000000
    12 Ga.
    0.189"
    3 1/2"2.31"Round
    0.189"Split
    00000000000000000
    11 Ga.
    0.191"
    3 1/2"2.31"Round
    0.191"Split
    00000000000000000
    10 Ga.
    0.1935"
    3 5/8"2.44"Round
    0.1935"Split
    00000000000000000
    9 Ga.
    0.196"
    3 5/8"2.44"Round
    0.196"Split
    00000000000000000
    8 Ga.
    0.199"
    3 5/8"2.44"Round
    0.199"Split
    00000000000000000
    7 Ga.
    0.201"
    3 5/8"2.44"Round
    0.201"Split
    00000000000000000
    6 Ga.
    0.204"
    3 3/4"2.5"Round
    0.204"Split
    000000000000000000
    5 Ga.
    0.2055"
    3 3/4"2.5"Round
    0.2055"Split
    000000000000000000
    4 Ga.
    0.209"
    3 3/4"2.5"Round
    0.209"Split
    000000000000000000
    3 Ga.
    0.213"
    3 3/4"2.5"Round
    0.213"Split
    000000000000000000
    2 Ga.
    0.221"
    3 7/8"2.63"Round
    0.221"Split
    000000000000000000
    1 Ga.
    0.228"
    3 7/8"2.63"Round
    0.228"Split
    000000000000000000
     
    Uncoated
    80 Ga.
    0.0135"
    3/4"0.1"Round
    0.0135"Standard
    0000000000000000
    79 Ga.
    0.0145"
    3/4"0.1"Round
    0.0145"Standard
    0000000000000000
    78 Ga.
    0.016"
    7/8"0.16"Round
    0.016"Standard
    0000000000000000
    77 Ga.
    0.018"
    7/8"0.16"Round
    0.018"Standard
    0000000000000000
    76 Ga.
    0.02"
    7/8"0.15"Round
    0.02"Standard
    0000000000000000
    75 Ga.
    0.021"
    1"0.21"Round
    0.021"Standard
    0000000000000000
    74 Ga.
    0.0225"
    1"0.21"Round
    0.0225"Standard
    0000000000000000
    73 Ga.
    0.024"
    1 1/8"0.27"Round
    0.024"Standard
    0000000000000000
    72 Ga.
    0.025"
    1 1/8"0.27"Round
    0.025"Standard
    0000000000000000
    71 Ga.
    0.026"
    1 1/4"0.33"Round
    0.026"Standard
    0000000000000000
    70 Ga.
    0.028"
    1 1/4"0.33"Round
    0.028"Standard
    0000000000000000
    69 Ga.
    0.0292"
    1 3/8"0.45"Round
    0.0292"Standard
    0000000000000000
    68 Ga.
    0.031"
    1 3/8"0.45"Round
    0.031"Standard
    0000000000000000
    67 Ga.
    0.032"
    1 3/8"0.45"Round
    0.032"Standard
    0000000000000000
    66 Ga.
    0.033"
    1 3/8"0.45"Round
    0.033"Standard
    0000000000000000
    65 Ga.
    0.035"
    1 1/2"0.57"Round
    0.035"Standard
    0000000000000000
    64 Ga.
    0.036"
    1 1/2"0.57"Round
    0.036"Standard
    0000000000000000
    63 Ga.
    0.037"
    1 1/2"0.57"Round
    0.037"Standard
    0000000000000000
    62 Ga.
    0.038"
    1 1/2"0.56"Round
    0.038"Standard
    0000000000000000
    61 Ga.
    0.039"
    1 5/8"0.62"Round
    0.039"Standard
    0000000000000000
    60 Ga.
    0.04"
    1 5/8"0.62"Round
    0.04"Standard
    0000000000000000
    59 Ga.
    0.041"
    1 5/8"0.62"Round
    0.041"Standard
    0000000000000000
    58 Ga.
    0.042"
    1 5/8"0.62"Round
    0.042"Standard
    0000000000000000
    57 Ga.
    0.043"
    1 3/4"0.68"Round
    0.043"Standard
    0000000000000000
    56 Ga.
    0.0465"
    1 3/4"0.68"Round
    0.0465"Standard
    0000000000000000
    55 Ga.
    0.052"
    1 7/8"0.79"Round
    0.052"Standard
    0000000000000000
    54 Ga.
    0.055"
    1 7/8"0.79"Round
    0.055"Standard
    0000000000000000
    53 Ga.
    0.0595"
    1 7/8"0.78"Round
    0.0595"Standard
    0000000000000000
    52 Ga.
    0.0635"
    1 7/8"0.78"Round
    0.0635"Split
    0000000000000000
    51 Ga.
    0.067"
    2"0.9"Round
    0.067"Split
    0000000000000000
    50 Ga.
    0.07"
    2"0.89"Round
    0.07"Split
    0000000000000000
    49 Ga.
    0.073"
    2"0.89"Round
    0.073"Split
    0000000000000000
    48 Ga.
    0.076"
    2"0.88"Round
    0.076"Split
    0000000000000000
    47 Ga.
    0.0785"
    2"0.88"Round
    0.0785"Split
    0000000000000000
    46 Ga.
    0.081"
    2 1/8"1"Round
    0.081"Split
    0000000000000000
    45 Ga.
    0.082"
    2 1/8"1"Round
    0.082"Split
    0000000000000000
    44 Ga.
    0.086"
    2 1/8"0.99"Round
    0.086"Split
    0000000000000000
    43 Ga.
    0.089"
    2 1/4"1.11"Round
    0.089"Split
    0000000000000000
    42 Ga.
    0.0935"
    2 1/4"1.11"Round
    0.0935"Split
    0000000000000000
    41 Ga.
    0.096"
    2 3/8"1.23"Round
    0.096"Split
    0000000000000000
    40 Ga.
    0.098"
    2 3/8"1.22"Round
    0.098"Split
    0000000000000000
    39 Ga.
    0.0995"
    2 3/8"1.22"Round
    0.0995"Split
    0000000000000000
    38 Ga.
    0.1015"
    2 1/2"1.28"Round
    0.1015"Split
    0000000000000000
    37 Ga.
    0.104"
    2 1/2"1.28"Round
    0.104"Split
    0000000000000000
    36 Ga.
    0.1065"
    2 1/2"1.27"Round
    0.1065"Split
    0000000000000000
    35 Ga.
    0.11"
    2 5/8"1.33"Round
    0.11"Split
    0000000000000000
    34 Ga.
    0.111"
    2 5/8"1.33"Round
    0.111"Split
    0000000000000000
    33 Ga.
    0.113"
    2 5/8"1.33"Round
    0.113"Split
    0000000000000000
    32 Ga.
    0.116"
    2 3/4"1.45"Round
    0.116"Split
    0000000000000000
    31 Ga.
    0.12"
    2 3/4"1.44"Round
    0.12"Split
    0000000000000000
    30 Ga.
    0.1285"
    2 3/4"1.43"Round
    0.1285"Split
    0000000000000000
    29 Ga.
    0.136"
    2 7/8"1.54"Round
    0.136"Split
    0000000000000000
    28 Ga.
    0.1405"
    2 7/8"1.53"Round
    0.1405"Split
    0000000000000000
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Split
    0000000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Split
    0000000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Split
    0000000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"Round
    0.152"Split
    0000000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"Round
    0.154"Split
    0000000000000000
    22 Ga.
    0.157"
    3 1/8"1.76"Round
    0.157"Split
    0000000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"Round
    0.159"Split
    0000000000000000
    20 Ga.
    0.161"
    3 1/4"1.88"Round
    0.161"Split
    0000000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"Round
    0.166"Split
    0000000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"Round
    0.1695"Split
    0000000000000000
    17 Ga.
    0.173"
    3 3/8"1.92"Round
    0.173"Split
    0000000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"Round
    0.177"Split
    0000000000000000
    15 Ga.
    0.18"
    3 3/8"1.91"Round
    0.18"Split
    0000000000000000
    14 Ga.
    0.182"
    3 3/8"1.91"Round
    0.182"Split
    0000000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"Round
    0.185"Split
    0000000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"Round
    0.189"Split
    0000000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"Round
    0.191"Split
    0000000000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"Round
    0.1935"Split
    0000000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"Round
    0.196"Split
    0000000000000000
    8 Ga.
    0.199"
    3 5/8"2.13"Round
    0.199"Split
    0000000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"Round
    0.201"Split
    0000000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"Round
    0.204"Split
    0000000000000000
    5 Ga.
    0.2055"
    3 3/4"2.19"Round
    0.2055"Split
    0000000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"Round
    0.209"Split
    0000000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"Round
    0.213"Split
    0000000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"Round
    0.221"Split
    0000000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"Round
    0.228"Split
    0000000000000000
     

    Cobalt Steel Drill Bit Sets

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bit Sets, Jobbers' Length.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    No. of
    Pieces
    Drill Bit Sizes Included
    System of Measurement
    Drill Bit Point
    Style
    Specs. Met
    Container
    Type
    Each
    Uncoated
    2080-61 gaWire GaugeStandard Point
    NAS907 Type JMetal Case0000000000000
    6060-53 ga,
    52-1 ga
    Wire GaugeStandard
    Split
    NAS907 Type JMetal Case0000000000000
    1141/16"-1/2" (increments of 1/64"),
    1.0-13.0 mm (increments of 0.5 mm),
    60-1 ga
    Inch, Metric, Wire GaugeSplit Point
    NAS907 Type JMetal Case000000000000000
    1151/16"-1/2" (increments of 1/64"),
    60-53 ga,
    52-1 ga,
    A-Z,
    Inch, Wire Gauge, Letter SizeSplit
    Standard
    NAS907 Type JMetal Case0000000000000
     

    Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    40 Ga.
    0.098"
    2 3/8"1.35"Round
    0.098"Standard
    00000000000000
    39 Ga.
    0.0995"
    2 3/8"1.35"Round
    0.0995"Standard
    0000000000000
    38 Ga.
    0.1015"
    2 1/2"1.35"Round
    0.1015"Standard
    0000000000000
    37 Ga.
    0.104"
    2 1/2"1.35"Round
    0.104"Standard
    0000000000000
    36 Ga.
    0.1065"
    2 1/2"1.35"Round
    0.1065"Standard
    0000000000000
    35 Ga.
    0.11"
    2 5/8"1.35"Round
    0.11"Standard
    0000000000000
    34 Ga.
    0.111"
    2 5/8"1.35"Round
    0.111"Standard
    0000000000000
    33 Ga.
    0.113"
    2 5/8"1.35"Round
    0.113"Standard
    0000000000000
    32 Ga.
    0.116"
    2 3/4"1.35"Round
    0.116"Standard
    0000000000000
    32 Ga.
    0.116"
    2 3/4"1.5"Round
    0.116"Split
    00000000000000
    31 Ga.
    0.12"
    2 3/4"1.35"Round
    0.12"Standard
    0000000000000
    31 Ga.
    0.12"
    2 3/4"1.4"Round
    0.12"Split
    00000000000000
    30 Ga.
    0.1285"
    2 3/4"1.35"Round
    0.1285"Standard
    0000000000000
    30 Ga.
    0.1285"
    2 3/4"1.4"Round
    0.1285"Split
    00000000000000
    29 Ga.
    0.136"
    2 7/8"1.5"Round
    0.136"Split
    00000000000000
    29 Ga.
    0.136"
    2 7/8"1.65"Round
    0.136"Standard
    0000000000000
    28 Ga.
    0.1405"
    2 7/8"1.5"Round
    0.1405"Split
    00000000000000
    28 Ga.
    0.1405"
    2 7/8"1.65"Round
    0.1405"Standard
    0000000000000
    27 Ga.
    0.144"
    3"1.65"Round
    0.144"Standard
    0000000000000
    27 Ga.
    0.144"
    3"1.7"Round
    0.144"Split
    00000000000000
    26 Ga.
    0.147"
    3"1.65"Round
    0.147"Standard
    0000000000000
    26 Ga.
    0.147"
    3"1.7"Round
    0.147"Split
    00000000000000
    25 Ga.
    0.1495"
    3"1.65"Round
    0.1495"Standard
    0000000000000
    25 Ga.
    0.1495"
    3"1.7"Round
    0.1495"Split
    00000000000000
    24 Ga.
    0.152"
    3 1/8"1.65"Round
    0.152"Standard
    0000000000000
    24 Ga.
    0.152"
    3 1/8"1.8"Round
    0.152"Split
    00000000000000
    23 Ga.
    0.154"
    3 1/8"1.65"Round
    0.154"Standard
    0000000000000
    23 Ga.
    0.154"
    3 1/8"1.8"Round
    0.154"Split
    00000000000000
    22 Ga.
    0.157"
    3 1/8"1.65"Round
    0.157"Standard
    0000000000000
    22 Ga.
    0.157"
    3 1/8"1.8"Round
    0.157"Split
    00000000000000
    21 Ga.
    0.159"
    3 1/4"1.65"Round
    0.159"Standard
    0000000000000
    21 Ga.
    0.159"
    3 1/4"1.9"Round
    0.159"Split
    00000000000000
    20 Ga.
    0.161"
    3 1/4"1.85"Round
    0.161"Standard
    0000000000000
    20 Ga.
    0.161"
    3 1/4"1.9"Round
    0.161"Split
    00000000000000
    19 Ga.
    0.166"
    3 1/4"1.85"Round
    0.166"Standard
    0000000000000
    19 Ga.
    0.166"
    3 1/4"1.9"Round
    0.166"Split
    00000000000000
    18 Ga.
    0.1695"
    3 1/4"1.85"Round
    0.1695"Standard
    0000000000000
    18 Ga.
    0.1695"
    3 1/4"1.9"Round
    0.1695"Split
    00000000000000
    17 Ga.
    0.173"
    3 3/8"1.85"Round
    0.173"Standard
    0000000000000
    17 Ga.
    0.173"
    3 3/8"1.9"Round
    0.173"Split
    00000000000000
    16 Ga.
    0.177"
    3 3/8"1.85"Round
    0.177"Standard
    0000000000000
    16 Ga.
    0.177"
    3 3/8"1.9"Round
    0.177"Split
    00000000000000
    15 Ga.
    0.18"
    3 3/8"1.85"Round
    0.18"Standard
    0000000000000
    15 Ga.
    0.18"
    3 3/8"1.9"Round
    0.18"Split
    00000000000000
    14 Ga.
    0.182"
    3 3/8"1.85"Round
    0.182"Standard
    0000000000000
    14 Ga.
    0.182"
    3 3/8"1.9"Round
    0.182"Split
    00000000000000
    13 Ga.
    0.185"
    3 1/2"1.85"Round
    0.185"Standard
    0000000000000
    13 Ga.
    0.185"
    3 1/2"2"Round
    0.185"Split
    00000000000000
    12 Ga.
    0.189"
    3 1/2"1.85"Round
    0.189"Standard
    0000000000000
    12 Ga.
    0.189"
    3 1/2"2"Round
    0.189"Split
    00000000000000
    11 Ga.
    0.191"
    3 1/2"1.85"Round
    0.191"Standard
    0000000000000
    11 Ga.
    0.191"
    3 1/2"2"Round
    0.191"Split
    00000000000000
    10 Ga.
    0.1935"
    3 5/8"2"Round
    0.1935"Standard
    0000000000000
    10 Ga.
    0.1935"
    3 5/8"2.1"Round
    0.1935"Split
    00000000000000
    9 Ga.
    0.196"
    3 5/8"2"Round
    0.196"Standard
    0000000000000
    9 Ga.
    0.196"
    3 5/8"2.1"Round
    0.196"Split
    00000000000000
    8 Ga.
    0.199"
    3 5/8"2"Round
    0.199"Standard
    0000000000000
    8 Ga.
    0.199"
    3 5/8"2.1"Round
    0.199"Split
    00000000000000
    7 Ga.
    0.201"
    3 5/8"2"Round
    0.201"Standard
    0000000000000
    7 Ga.
    0.201"
    3 5/8"2.1"Round
    0.201"Split
    00000000000000
    6 Ga.
    0.204"
    3 3/4"2"Round
    0.204"Standard
    0000000000000
    6 Ga.
    0.204"
    3 3/4"2.2"Round
    0.204"Split
    00000000000000
    5 Ga.
    0.2055"
    3 3/4"2"Round
    0.2055"Standard
    0000000000000
    5 Ga.
    0.2055"
    3 3/4"2.2"Round
    0.2055"Split
    00000000000000
    4 Ga.
    0.209"
    3 3/4"2"Round
    0.209"Standard
    0000000000000
    4 Ga.
    0.209"
    3 3/4"2.2"Round
    0.209"Split
    00000000000000
    3 Ga.
    0.213"
    3 3/4"2"Round
    0.213"Standard
    0000000000000
    3 Ga.
    0.213"
    3 3/4"2.2"Round
    0.213"Split
    00000000000000
    2 Ga.
    0.221"
    3 7/8"2"Round
    0.221"Standard
    0000000000000
    2 Ga.
    0.221"
    3 7/8"2.3"Round
    0.221"Split
    00000000000000
    1 Ga.
    0.228"
    3 7/8"2.1"Round
    0.228"Standard
    0000000000000
    1 Ga.
    0.228"
    3 7/8"2.3"Round
    0.228"Split
    00000000000000
    A
    0.234"
    3 7/8"2.1"Round
    0.234"Standard
    0000000000000
    A
    0.234"
    3 7/8"2.3"Round
    0.234"Split
    00000000000000
    B
    0.238"
    4"2.1"Round
    0.238"Standard
    0000000000000
    B
    0.238"
    4"2.4"Round
    0.238"Split
    00000000000000
    C
    0.242"
    4"2.1"Round
    0.242"Standard
    0000000000000
    C
    0.242"
    4"2.4"Round
    0.242"Split
    00000000000000
    D
    0.246"
    4"2.1"Round
    0.246"Standard
    0000000000000
    D
    0.246"
    4"2.4"Round
    0.246"Split
    00000000000000
    F
    0.257"
    4 1/8"2.4"Round
    0.257"Standard
    0000000000000
    F
    0.257"
    4 1/8"2.8"Round
    0.257"Split
    00000000000000
    G
    0.261"
    4 1/8"2.4"Round
    0.261"Standard
    0000000000000
    G
    0.261"
    4 1/8"2.5"Round
    0.261"Split
    00000000000000
    H
    0.266"
    4 1/8"2.4"Round
    0.266"Standard
    0000000000000
    H
    0.266"
    4 1/8"2.5"Round
    0.266"Split
    00000000000000
    I
    0.272"
    4 1/8"2.4"Round
    0.272"Standard
    0000000000000
    I
    0.272"
    4 1/8"2.5"Round
    0.272"Split
    00000000000000
    J
    0.277"
    4 1/8"2.4"Round
    0.277"Standard
    0000000000000
    J
    0.277"
    4 1/8"2.5"Round
    0.277"Split
    00000000000000
    K
    0.281"
    4 1/4"2.4"Round
    0.281"Standard
    0000000000000
    K
    0.281"
    4 1/4"2.5"Round
    0.281"Split
    00000000000000
    L
    0.29"
    4 1/4"2.5"Round
    0.29"Split
    00000000000000
    L
    0.29"
    4 1/4"2.6"Round
    0.29"Standard
    0000000000000
    M
    0.295"
    4 3/8"2.6"Round
    0.295"Standard
    0000000000000
    M
    0.295"
    4 3/8"2.6"Round
    0.295"Split
    00000000000000
    N
    0.302"
    4 3/8"2.6"Round
    0.302"Standard
    0000000000000
    N
    0.302"
    4 3/8"2.6"Round
    0.302"Split
    00000000000000
    O
    0.316"
    4 1/2"2.6"Round
    0.316"Standard
    0000000000000
    O
    0.316"
    4 1/2"2.7"Round
    0.316"Split
    00000000000000
    P
    0.323"
    4 5/8"2.8"Round
    0.323"Standard
    0000000000000
    P
    0.323"
    4 5/8"2.8"Round
    0.323"Split
    00000000000000
    Q
    0.332"
    4 3/4"2.8"Round
    0.332"Standard
    0000000000000
    Q
    0.332"
    4 3/4"2.9"Round
    0.332"Split
    00000000000000
    R
    0.339"
    4 3/4"2.8"Round
    0.339"Standard
    0000000000000
    R
    0.339"
    4 3/4"2.9"Round
    0.339"Split
    00000000000000
    S
    0.348"
    4 7/8"2.9"Round
    0.348"Standard
    0000000000000
    S
    0.348"
    4 7/8"3"Round
    0.348"Split
    00000000000000
    T
    0.358"
    4 7/8"2.9"Round
    0.358"Standard
    0000000000000
    T
    0.358"
    4 7/8"3"Round
    0.358"Split
    00000000000000
    U
    0.368"
    5"2.9"Round
    0.368"Standard
    0000000000000
    U
    0.368"
    5"3.1"Round
    0.368"Split
    00000000000000
    V
    0.377"
    5"2.9"Round
    0.377"Standard
    0000000000000
    V
    0.377"
    5"3.1"Round
    0.377"Split
    00000000000000
    W
    0.386"
    5 1/8"3"Round
    0.386"Standard
    0000000000000
    W
    0.386"
    5 1/8"3.2"Round
    0.386"Split
    00000000000000
    X
    0.397"
    5 1/8"3"Round
    0.397"Standard
    0000000000000
    X
    0.397"
    5 1/8"3.2"Round
    0.397"Split
    00000000000000
    Y
    0.404"
    5 1/4"3"Round
    0.404"Standard
    0000000000000
    Y
    0.404"
    5 1/4"3.3"Round
    0.404"Split
    00000000000000
    Z
    0.413"
    5 1/4"3.2"Round
    0.413"Standard
    0000000000000
    Z
    0.413"
    5 1/4"3.3"Round
    0.413"Split
    00000000000000
     

    High-Speed Steel Drill Bit Sets

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bit Sets, Jobbers' Length.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Split

    Standard

    These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    No. of
    Pieces
    Drill Bit Sizes Included
    System of Measurement
    Drill Bit Point
    Style
    Specs. Met
    Container Type
    Each
    Black Oxide
    2080-61 gaWire GaugeStandard Point
    NAS907 Type BMetal Case0000000000000
    6060-53 ga,
    52-1 ga
    Wire GaugeStandard
    Split
    NAS907 Type BMetal Case0000000000000
    8080-1 gaWire GaugeStandard Point
    ASME B94.11M, DIN 338Metal Case0000000000000
    1141/16"-1/2" (increments of 1/64"),
    1.0-13.0 mm (increments of 0.5 mm),
    60-1 ga
    Inch, Metric, Wire GaugeStandard Point
    DIN 338Metal Case0000000000000
    1151/16"-1/2" (increments of 1/64"),
    60-53 ga,
    52-1 ga,
    A-Z,
    Inch, Wire Gauge, Letter SizeSplit
    Standard
    NAS907 Type BMetal Case0000000000000
    1151/16"-1/2" (increments of 1/64"),
    60-1 ga,
    A-Z
    Inch, Wire Gauge, Letter SizeStandard Point
    ASME B94.11M, DIN 338Metal Case0000000000000
    2495 each of 60-53 ga,
    5 each of 52-30 ga,
    4 each of 29-23 ga,
    3 each of 22-1 ga,
    Wire GaugeStandard
    Split
    Metal Drawer Cabinet0000000000000
     
    Titanium Nitride (TiN) Coated
    2080-61 gaWire GaugeStandard Point
    NAS907 Type BMetal Case00000000000000
    6060-53 ga,
    52-1 ga
    Wire GaugeStandard
    Split
    NAS907 Type BMetal Case00000000000000
    1151/16"-1/2" (increments of 1/64"),
    60-53 ga,
    52-1 ga,
    A-Z,
    Inch, Wire Gauge, Letter SizeSplit
    Standard
    NAS907 Type BMetal Case0000000000000
    2495 each of 60-30 ga,
    4 each of 29-23 ga,
    3 each of 22-1 ga
    Wire GaugeSplit Point
    NAS907 Type BMetal Drawer Cabinet0000000000000
     
    Uncoated
    2080-61 gaWire GaugeStandard Point
    ASME B94.11M, DIN 338Metal Case0000000000000
    6060-1 gaWire GaugeStandard Point
    ASME B94.11M, DIN 338Metal Case00000000000000
    1151/16"-1/2" (increments of 1/64"),
    60-1 ga,
    A-Z
    Inch, Wire Gauge, Letter SizeStandard Point
    ASME B94.11M, DIN 338Metal Case0000000000000
    2495 each of 60-30 ga,
    4 each of 29-23 ga,
    3 each of 22-1 ga
    Wire GaugeSplit Point
    NAS907 Type AMetal Drawer Cabinet00000000000000
     

    Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    56 Ga.
    0.0465"
    1 1/2"0.6"Round
    0.0465"Four Facet
    00000000000000
    55 Ga.
    0.052"
    1 1/2"0.6"Round
    0.052"Four Facet
    0000000000000
    54 Ga.
    0.055"
    1 1/2"0.6"Round
    0.055"Four Facet
    0000000000000
    53 Ga.
    0.0595"
    1 1/2"0.6"Round
    0.0595"Four Facet
    0000000000000
    52 Ga.
    0.0635"
    1 1/2"0.6"Round
    0.0635"Four Facet
    0000000000000
    51 Ga.
    0.067"
    1 1/2"0.6"Round
    0.067"Four Facet
    0000000000000
    50 Ga.
    0.07"
    1 3/4"0.7"Round
    0.07"Four Facet
    0000000000000
    49 Ga.
    0.073"
    1 3/4"0.7"Round
    0.073"Four Facet
    0000000000000
    48 Ga.
    0.076"
    1 3/4"0.7"Round
    0.076"Four Facet
    0000000000000
    47 Ga.
    0.0785"
    1 3/4"0.7"Round
    0.0785"Four Facet
    0000000000000
    46 Ga.
    0.081"
    1 3/4"0.7"Round
    0.081"Four Facet
    0000000000000
    45 Ga.
    0.082"
    1 3/4"0.7"Round
    0.082"Four Facet
    0000000000000
    44 Ga.
    0.086"
    2"0.8"Round
    0.086"Four Facet
    0000000000000
    43 Ga.
    0.089"
    2"0.8"Round
    0.089"Four Facet
    0000000000000
    42 Ga.
    0.0935"
    2"0.8"Round
    0.0935"Four Facet
    0000000000000
    41 Ga.
    0.096"
    2"0.8"Round
    0.096"Four Facet
    0000000000000
    40 Ga.
    0.098"
    2"0.8"Round
    0.098"Four Facet
    0000000000000
    39 Ga.
    0.0995"
    2 1/4"1"Round
    0.0995"Four Facet
    0000000000000
    38 Ga.
    0.1015"
    2 1/4"1"Round
    0.1015"Four Facet
    0000000000000
    37 Ga.
    0.104"
    2 1/4"1"Round
    0.104"Four Facet
    0000000000000
    36 Ga.
    0.1065"
    2 1/4"1"Round
    0.1065"Four Facet
    0000000000000
    35 Ga.
    0.11"
    2 1/4"1"Round
    0.11"Four Facet
    0000000000000
    34 Ga.
    0.111"
    2 1/4"1"Round
    0.111"Four Facet
    0000000000000
    33 Ga.
    0.113"
    2 1/4"1"Round
    0.113"Four Facet
    0000000000000
    32 Ga.
    0.116"
    2 1/4"1"Round
    0.116"Four Facet
    0000000000000
    31 Ga.
    0.12"
    2 1/4"1"Round
    0.12"Four Facet
    0000000000000
    30 Ga.
    0.1285"
    2 1/4"1.1"Round
    0.1285"Four Facet
    0000000000000
    29 Ga.
    0.136"
    2 1/2"1.1"Round
    0.136"Four Facet
    0000000000000
    28 Ga.
    0.1405"
    2 1/2"1.1"Round
    0.1405"Four Facet
    0000000000000
    27 Ga.
    0.144"
    2 1/2"1.1"Round
    0.144"Four Facet
    0000000000000
    26 Ga.
    0.147"
    2 1/2"1.1"Round
    0.147"Four Facet
    0000000000000
    25 Ga.
    0.1495"
    2 1/2"1.1"Round
    0.1495"Four Facet
    0000000000000
    24 Ga.
    0.152"
    2 1/2"1.1"Round
    0.152"Four Facet
    0000000000000
    23 Ga.
    0.154"
    2 1/2"1.1"Round
    0.154"Four Facet
    0000000000000
    22 Ga.
    0.157"
    2 1/2"1.1"Round
    0.157"Four Facet
    0000000000000
    21 Ga.
    0.159"
    2 1/2"1.1"Round
    0.159"Four Facet
    0000000000000
    20 Ga.
    0.161"
    2 1/2"1.1"Round
    0.161"Four Facet
    0000000000000
    19 Ga.
    0.166"
    2 3/4"1.3"Round
    0.166"Four Facet
    0000000000000
    18 Ga.
    0.1695"
    2 3/4"1.3"Round
    0.1695"Four Facet
    0000000000000
    17 Ga.
    0.173"
    2 3/4"1.3"Round
    0.173"Four Facet
    0000000000000
    16 Ga.
    0.177"
    2 3/4"1.3"Round
    0.177"Four Facet
    0000000000000
    15 Ga.
    0.18"
    2 3/4"1.3"Round
    0.18"Four Facet
    0000000000000
    14 Ga.
    0.182"
    2 3/4"1.3"Round
    0.182"Four Facet
    0000000000000
    13 Ga.
    0.185"
    2 3/4"1.3"Round
    0.185"Four Facet
    0000000000000
    12 Ga.
    0.189"
    2 3/4"1.3"Round
    0.189"Four Facet
    0000000000000
    11 Ga.
    0.191"
    2 3/4"1.3"Round
    0.191"Four Facet
    0000000000000
    10 Ga.
    0.1935"
    2 3/4"1.3"Round
    0.1935"Four Facet
    0000000000000
    9 Ga.
    0.196"
    3"1.4"Round
    0.196"Four Facet
    0000000000000
    8 Ga.
    0.199"
    3"1.4"Round
    0.199"Four Facet
    0000000000000
    7 Ga.
    0.201"
    3"1.4"Round
    0.201"Four Facet
    0000000000000
    6 Ga.
    0.204"
    3"1.4"Round
    0.204"Four Facet
    0000000000000
    5 Ga.
    0.2055"
    3"1.4"Round
    0.2055"Four Facet
    0000000000000
    4 Ga.
    0.209"
    3"1.4"Round
    0.209"Four Facet
    0000000000000
    3 Ga.
    0.213"
    3"1.4"Round
    0.213"Four Facet
    0000000000000
    2 Ga.
    0.221"
    3"1.4"Round
    0.221"Four Facet
    0000000000000
    1 Ga.
    0.228"
    3 1/4"1.4"Round
    0.228"Four Facet
    000000000000
     
    Titanium Aluminum Nitride (TiAlN) Coated
    30 Ga.
    0.1285"
    2 1/4"1.1"Round
    0.1285"Four Facet
    0000000000000
    29 Ga.
    0.136"
    2 1/2"1.4"Round
    0.136"Four Facet
    000000000000
    28 Ga.
    0.1405"
    2 1/2"1.1"Round
    0.1405"Four Facet
    0000000000000
    27 Ga.
    0.144"
    2 1/2"1.1"Round
    0.144"Four Facet
    0000000000000
    26 Ga.
    0.147"
    2 1/2"1.1"Round
    0.147"Four Facet
    0000000000000
    25 Ga.
    0.1495"
    2 1/2"1.1"Round
    0.1495"Four Facet
    000000000000
    24 Ga.
    0.152"
    2 1/2"1.1"Round
    0.152"Four Facet
    0000000000000
    23 Ga.
    0.154"
    2 1/2"1.1"Round
    0.154"Four Facet
    0000000000000
    22 Ga.
    0.157"
    2 1/2"1.1"Round
    0.157"Four Facet
    0000000000000
    21 Ga.
    0.159"
    2 1/2"1.1"Round
    0.159"Four Facet
    000000000000
    20 Ga.
    0.161"
    2 1/2"1.1"Round
    0.161"Four Facet
    0000000000000
    19 Ga.
    0.166"
    2 3/4"1.3"Round
    0.166"Four Facet
    0000000000000
    18 Ga.
    0.1695"
    2 3/4"1.3"Round
    0.1695"Four Facet
    0000000000000
    17 Ga.
    0.173"
    2 3/4"1.3"Round
    0.173"Four Facet
    0000000000000
    16 Ga.
    0.177"
    2 3/4"1.3"Round
    0.177"Four Facet
    0000000000000
    15 Ga.
    0.18"
    2 3/4"1.3"Round
    0.18"Four Facet
    0000000000000
    14 Ga.
    0.182"
    2 3/4"1.3"Round
    0.182"Four Facet
    0000000000000
    13 Ga.
    0.185"
    2 3/4"1.3"Round
    0.185"Four Facet
    0000000000000
    12 Ga.
    0.189"
    2 3/4"1.3"Round
    0.189"Four Facet
    0000000000000
    11 Ga.
    0.191"
    2 3/4"1.3"Round
    0.191"Four Facet
    0000000000000
    10 Ga.
    0.1935"
    2 3/4"1.3"Round
    0.1935"Four Facet
    0000000000000
    9 Ga.
    0.196"
    3"1.4"Round
    0.196"Four Facet
    0000000000000
    8 Ga.
    0.199"
    3"1.4"Round
    0.199"Four Facet
    0000000000000
    7 Ga.
    0.201"
    3"1.1"Round
    0.201"Four Facet
    000000000000
    6 Ga.
    0.204"
    3"1.4"Round
    0.204"Four Facet
    0000000000000
    5 Ga.
    0.2055"
    3"1.4"Round
    0.2055"Four Facet
    0000000000000
    4 Ga.
    0.209"
    3"1.4"Round
    0.209"Four Facet
    0000000000000
    3 Ga.
    0.213"
    3"1.4"Round
    0.213"Four Facet
    0000000000000
    2 Ga.
    0.221"
    3"1.4"Round
    0.221"Four Facet
    0000000000000
    1 Ga.
    0.228"
    3 1/4"1.4"Round
    0.228"Four Facet
    0000000000000
     
    Uncoated
    80 Ga.
    0.0135"
    1 1/4"0.2"Round
    0.0135"Four Facet
    000000000000
    79 Ga.
    0.0145"
    1 1/4"0.2"Round
    0.0145"Four Facet
    000000000000
    78 Ga.
    0.016"
    1 1/4"0.2"Round
    0.016"Four Facet
    000000000000
    77 Ga.
    0.018"
    1 1/4"0.2"Round
    0.018"Four Facet
    000000000000
    76 Ga.
    0.02"
    1 1/4"0.2"Round
    0.02"Four Facet
    000000000000
    75 Ga.
    0.021"
    1 1/4"0.2"Round
    0.021"Four Facet
    000000000000
    74 Ga.
    0.0225"
    1 1/4"0.2"Round
    0.0225"Four Facet
    000000000000
    73 Ga.
    0.024"
    1 1/4"0.2"Round
    0.024"Four Facet
    000000000000
    72 Ga.
    0.025"
    1 1/4"0.25"Round
    0.025"Four Facet
    000000000000
    71 Ga.
    0.026"
    1 1/4"0.25"Round
    0.026"Four Facet
    000000000000
    70 Ga.
    0.028"
    1 1/4"0.25"Round
    0.028"Four Facet
    000000000000
    69 Ga.
    0.0292"
    1 1/4"0.25"Round
    0.0292"Four Facet
    000000000000
    68 Ga.
    0.031"
    1 1/4"0.25"Round
    0.031"Four Facet
    000000000000
    67 Ga.
    0.032"
    1 1/4"0.25"Round
    0.032"Four Facet
    000000000000
    66 Ga.
    0.033"
    1 1/4"0.25"Round
    0.033"Four Facet
    000000000000
    65 Ga.
    0.035"
    1 1/2"0.5"Round
    0.035"Four Facet
    000000000000
    64 Ga.
    0.036"
    1 1/2"0.5"Round
    0.036"Four Facet
    000000000000
    63 Ga.
    0.037"
    1 1/2"0.5"Round
    0.037"Four Facet
    000000000000
    62 Ga.
    0.038"
    1 1/2"0.5"Round
    0.038"Four Facet
    000000000000
    61 Ga.
    0.039"
    1 1/2"0.5"Round
    0.039"Four Facet
    000000000000
    60 Ga.
    0.04"
    1 1/2"0.6"Round
    0.04"Four Facet
    000000000000
    59 Ga.
    0.041"
    1 1/2"0.6"Round
    0.041"Four Facet
    000000000000
    58 Ga.
    0.042"
    1 1/2"0.6"Round
    0.042"Four Facet
    000000000000
    57 Ga.
    0.043"
    1 1/2"0.6"Round
    0.043"Four Facet
    000000000000
    56 Ga.
    0.0465"
    1 1/2"0.6"Round
    0.0465"Four Facet
    000000000000
    55 Ga.
    0.052"
    1 1/2"0.6"Round
    0.052"Four Facet
    000000000000
    54 Ga.
    0.055"
    1 1/2"0.6"Round
    0.055"Four Facet
    000000000000
    53 Ga.
    0.0595"
    1 1/2"0.6"Round
    0.0595"Four Facet
    000000000000
    52 Ga.
    0.0635"
    1 1/2"0.6"Round
    0.0635"Four Facet
    000000000000
    51 Ga.
    0.067"
    1 1/2"0.6"Round
    0.067"Four Facet
    000000000000
    50 Ga.
    0.07"
    1 3/4"0.7"Round
    0.07"Four Facet
    000000000000
    49 Ga.
    0.073"
    1 3/4"0.7"Round
    0.073"Four Facet
    000000000000
    48 Ga.
    0.076"
    1 3/4"0.7"Round
    0.076"Four Facet
    000000000000
    47 Ga.
    0.0785"
    1 3/4"0.7"Round
    0.0785"Four Facet
    000000000000
    46 Ga.
    0.081"
    1 3/4"0.7"Round
    0.081"Four Facet
    000000000000
    45 Ga.
    0.082"
    1 3/4"0.7"Round
    0.082"Four Facet
    000000000000
    44 Ga.
    0.086"
    2"0.8"Round
    0.086"Four Facet
    000000000000
    43 Ga.
    0.089"
    2"0.8"Round
    0.089"Four Facet
    000000000000
    42 Ga.
    0.0935"
    2"0.8"Round
    0.0935"Four Facet
    000000000000
    41 Ga.
    0.096"
    2"0.8"Round
    0.096"Four Facet
    000000000000
    40 Ga.
    0.098"
    2"0.8"Round
    0.098"Four Facet
    000000000000
    39 Ga.
    0.0995"
    2 1/4"1"Round
    0.0995"Four Facet
    000000000000
    38 Ga.
    0.1015"
    2 1/4"1"Round
    0.1015"Four Facet
    000000000000
    37 Ga.
    0.104"
    2 1/4"1"Round
    0.104"Four Facet
    000000000000
    36 Ga.
    0.1065"
    2 1/4"1"Round
    0.1065"Four Facet
    000000000000
    35 Ga.
    0.11"
    2 1/4"1"Round
    0.11"Four Facet
    000000000000
    34 Ga.
    0.111"
    2 1/4"1"Round
    0.111"Four Facet
    000000000000
    33 Ga.
    0.113"
    2 1/4"1"Round
    0.113"Four Facet
    000000000000
    32 Ga.
    0.116"
    2 1/4"1"Round
    0.116"Four Facet
    000000000000
    31 Ga.
    0.12"
    2 1/4"1"Round
    0.12"Four Facet
    000000000000
    30 Ga.
    0.1285"
    2 1/4"1.1"Round
    0.1285"Four Facet
    000000000000
    29 Ga.
    0.136"
    2 1/2"1.1"Round
    0.136"Four Facet
    000000000000
    28 Ga.
    0.1405"
    2 1/2"1.1"Round
    0.1405"Four Facet
    000000000000
    27 Ga.
    0.144"
    2 1/2"1.1"Round
    0.144"Four Facet
    000000000000
    26 Ga.
    0.147"
    2 1/2"1.1"Round
    0.147"Four Facet
    000000000000
    25 Ga.
    0.1495"
    2 1/2"1.1"Round
    0.1495"Four Facet
    000000000000
    24 Ga.
    0.152"
    2 1/2"1.1"Round
    0.152"Four Facet
    000000000000
    23 Ga.
    0.154"
    2 1/2"1.1"Round
    0.154"Four Facet
    000000000000
    22 Ga.
    0.157"
    2 1/2"1.1"Round
    0.157"Four Facet
    000000000000
    21 Ga.
    0.159"
    2 1/2"1.1"Round
    0.159"Four Facet
    000000000000
    20 Ga.
    0.161"
    2 1/2"1.1"Round
    0.161"Four Facet
    000000000000
    19 Ga.
    0.166"
    2 3/4"1.3"Round
    0.166"Four Facet
    000000000000
    18 Ga.
    0.1695"
    2 3/4"1.3"Round
    0.1695"Four Facet
    000000000000
    17 Ga.
    0.173"
    2 3/4"1.3"Round
    0.173"Four Facet
    000000000000
    16 Ga.
    0.177"
    2 3/4"1.3"Round
    0.177"Four Facet
    000000000000
    15 Ga.
    0.18"
    2 3/4"1.3"Round
    0.18"Four Facet
    000000000000
    14 Ga.
    0.182"
    2 3/4"1.3"Round
    0.182"Four Facet
    000000000000
    13 Ga.
    0.185"
    2 3/4"1.3"Round
    0.185"Four Facet
    000000000000
    12 Ga.
    0.189"
    2 3/4"1.3"Round
    0.189"Four Facet
    000000000000
    11 Ga.
    0.191"
    2 3/4"1.3"Round
    0.191"Four Facet
    000000000000
    10 Ga.
    0.1935"
    2 3/4"1.3"Round
    0.1935"Four Facet
    000000000000
    9 Ga.
    0.196"
    3"1.4"Round
    0.196"Four Facet
    000000000000
    8 Ga.
    0.199"
    3"1.4"Round
    0.199"Four Facet
    000000000000
    7 Ga.
    0.201"
    3"1.4"Round
    0.201"Four Facet
    000000000000
    6 Ga.
    0.204"
    3"1.4"Round
    0.204"Four Facet
    000000000000
    5 Ga.
    0.2055"
    3"1.4"Round
    0.2055"Four Facet
    000000000000
    4 Ga.
    0.209"
    3"1.4"Round
    0.209"Four Facet
    000000000000
    3 Ga.
    0.213"
    3"1.4"Round
    0.213"Four Facet
    000000000000
    2 Ga.
    0.221"
    3"1.4"Round
    0.221"Four Facet
    000000000000
    1 Ga.
    0.228"
    3 1/4"1.4"Round
    0.228"Four Facet
    000000000000
     

    Carbide Drill Bit Sets

    The hardest and most wear-resistant drill bits you can buy. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Carbide Drill Bit Sets, Jobbers' Length.
    These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    No. of
    Pieces
    Drill Bit Sizes
    Included
    System of
    Measurement
    Drill Bit Point
    Style
    Container
    Type
    Each
    Uncoated
    6060-1 gaWire GaugeFour-Facet Point
    Metal Case000000000000000
     

    Left-Hand High-Speed Steel Drill Bit Sets

    With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Left-Hand High-Speed Steel Drill Bit Sets, Jobbers' Length.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    No. of
    Pieces
    Drill Bit Sizes
    Included
    System of
    Measurement
    Drill Bit Point
    Style
    Container
    Type
    Each
    Uncoated
    6060-1 gaWire GaugeStandard Point
    Metal Case000000000000000
     

    Chip-Clearing Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Cobalt Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    52 Ga.
    0.0635"
    2"0.88"ParabolicRound
    0.0635"Split
    0000000000000
    51 Ga.
    0.067"
    2"0.88"ParabolicRound
    0.067"Split
    000000000000
    50 Ga.
    0.07"
    2"0.88"ParabolicRound
    0.07"Split
    000000000000
    49 Ga.
    0.073"
    2"0.88"ParabolicRound
    0.073"Split
    000000000000
    48 Ga.
    0.076"
    2"0.88"ParabolicRound
    0.076"Split
    000000000000
    47 Ga.
    0.0785"
    2"0.88"ParabolicRound
    0.0785"Split
    000000000000
    46 Ga.
    0.081"
    2 1/8"1.13"ParabolicRound
    0.081"Split
    000000000000
    45 Ga.
    0.082"
    2 1/8"1.13"ParabolicRound
    0.082"Split
    000000000000
    44 Ga.
    0.086"
    2 1/8"1.13"ParabolicRound
    0.086"Split
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.22"ParabolicRound
    0.089"Split
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.15"ParabolicRound
    0.0935"Split
    000000000000
    41 Ga.
    0.096"
    2 1/4"1.15"ParabolicRound
    0.096"Split
    000000000000
    40 Ga.
    0.098"
    2 1/4"1.15"ParabolicRound
    0.098"Split
    000000000000
    39 Ga.
    0.0995"
    2 1/4"1.15"ParabolicRound
    0.0995"Split
    000000000000
    38 Ga.
    0.1015"
    2 1/4"1.15"ParabolicRound
    0.1015"Split
    000000000000
    37 Ga.
    0.104"
    2 1/4"1.15"ParabolicRound
    0.104"Split
    000000000000
    36 Ga.
    0.1065"
    2 3/8"1.27"ParabolicRound
    0.1065"Split
    000000000000
    35 Ga.
    0.11"
    2 3/8"1.27"ParabolicRound
    0.11"Split
    000000000000
    34 Ga.
    0.111"
    2 3/8"1.27"ParabolicRound
    0.111"Split
    000000000000
    33 Ga.
    0.113"
    2 3/8"1.27"ParabolicRound
    0.113"Split
    000000000000
    32 Ga.
    0.116"
    2 3/8"1.27"ParabolicRound
    0.116"Split
    000000000000
    31 Ga.
    0.12"
    2 1/2"1.41"ParabolicRound
    0.12"Split
    000000000000
    30 Ga.
    0.1285"
    2 1/2"1.41"ParabolicRound
    0.1285"Split
    000000000000
    29 Ga.
    0.136"
    2 3/4"1.47"ParabolicRound
    0.136"Split
    000000000000
    28 Ga.
    0.1405"
    2 3/4"1.47"ParabolicRound
    0.1405"Split
    000000000000
    27 Ga.
    0.144"
    2 3/4"1.47"ParabolicRound
    0.144"Split
    000000000000
    26 Ga.
    0.147"
    2 3/4"1.47"ParabolicRound
    0.147"Split
    000000000000
    25 Ga.
    0.1495"
    3"1.56"ParabolicRound
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    3"1.56"ParabolicRound
    0.152"Split
    000000000000
    23 Ga.
    0.154"
    3"1.56"ParabolicRound
    0.154"Split
    000000000000
    22 Ga.
    0.157"
    3"1.56"ParabolicRound
    0.157"Split
    0000000000000
    21 Ga.
    0.159"
    3"1.56"ParabolicRound
    0.159"Split
    0000000000000
    20 Ga.
    0.161"
    3"1.56"ParabolicRound
    0.161"Split
    0000000000000
    19 Ga.
    0.166"
    3"1.56"ParabolicRound
    0.166"Split
    0000000000000
    18 Ga.
    0.1695"
    3 1/8"1.75"ParabolicRound
    0.1695"Split
    0000000000000
    17 Ga.
    0.173"
    3 1/8"1.75"ParabolicRound
    0.173"Split
    0000000000000
    16 Ga.
    0.177"
    3 1/8"1.75"ParabolicRound
    0.177"Split
    0000000000000
    15 Ga.
    0.18"
    3 1/8"1.75"ParabolicRound
    0.18"Split
    0000000000000
    14 Ga.
    0.182"
    3 1/8"1.75"ParabolicRound
    0.182"Split
    0000000000000
    13 Ga.
    0.185"
    3 1/8"1.75"ParabolicRound
    0.185"Split
    0000000000000
    12 Ga.
    0.189"
    3 3/8"1.94"ParabolicRound
    0.189"Split
    0000000000000
    11 Ga.
    0.191"
    3 3/8"1.94"ParabolicRound
    0.191"Split
    0000000000000
    10 Ga.
    0.1935"
    3 3/8"1.94"ParabolicRound
    0.1935"Split
    0000000000000
    9 Ga.
    0.196"
    3 3/8"1.94"ParabolicRound
    0.196"Split
    0000000000000
    8 Ga.
    0.199"
    3 3/8"1.94"ParabolicRound
    0.199"Split
    0000000000000
    7 Ga.
    0.201"
    3 3/8"1.94"ParabolicRound
    0.201"Split
    0000000000000
    6 Ga.
    0.204"
    3 3/8"1.94"ParabolicRound
    0.204"Split
    0000000000000
    5 Ga.
    0.2055"
    3 3/8"1.94"ParabolicRound
    0.2055"Split
    0000000000000
    4 Ga.
    0.209"
    3 5/8"2.2"ParabolicRound
    0.209"Split
    0000000000000
    3 Ga.
    0.213"
    3 5/8"2.2"ParabolicRound
    0.213"Split
    0000000000000
    2 Ga.
    0.221"
    3 5/8"2.2"ParabolicRound
    0.221"Split
    0000000000000
    1 Ga.
    0.228"
    3 5/8"2.2"ParabolicRound
    0.228"Split
    0000000000000
     

    Short-Flute Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Short-Flute Cobalt Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    These bits combine the toughness and wear resistance of cobalt with short flutes for rigidity. The shallow drilling depth makes them less likely to wobble than other bits of the same length, so they stay centered and drill straighter. Cobalt lasts at least twice as long as high-speed steel. It can also run up to 25% faster at higher temperatures without damaging the bit on hard materials such as nickel.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-9
    10-Up
    Jobbers' Length
     
    Black Oxide
    52 Ga.
    0.0635"
    1 7/8"0.59"Round
    0.0635"Split
    000000000000000000
    51 Ga.
    0.067"
    2"0.59"Round
    0.067"Split
    0000000000000000
    50 Ga.
    0.07"
    2"0.58"Round
    0.07"Split
    0000000000000000
    49 Ga.
    0.073"
    2"0.58"Round
    0.073"Split
    0000000000000000
    48 Ga.
    0.076"
    2"0.57"Round
    0.076"Split
    0000000000000000
    47 Ga.
    0.0785"
    2"0.57"Round
    0.0785"Split
    0000000000000000
    46 Ga.
    0.081"
    2 1/8"0.63"Round
    0.081"Split
    0000000000000000
    45 Ga.
    0.082"
    2 1/8"0.63"Round
    0.082"Split
    0000000000000000
    44 Ga.
    0.086"
    2 1/8"0.62"Round
    0.086"Split
    0000000000000000
    43 Ga.
    0.089"
    2 1/4"0.62"Round
    0.089"Split
    0000000000000000
    42 Ga.
    0.0935"
    2 1/4"0.61"Round
    0.0935"Split
    0000000000000000
    41 Ga.
    0.096"
    2 3/8"0.67"Round
    0.096"Split
    0000000000000000
    40 Ga.
    0.098"
    2 3/8"0.67"Round
    0.098"Split
    0000000000000000
    39 Ga.
    0.0995"
    2 3/8"0.66"Round
    0.0995"Split
    0000000000000000
    38 Ga.
    0.1015"
    2 1/2"0.66"Round
    0.1015"Split
    0000000000000000
    37 Ga.
    0.104"
    2 1/2"0.66"Round
    0.104"Split
    0000000000000000
    36 Ga.
    0.1065"
    2 1/2"0.65"Round
    0.1065"Split
    0000000000000000
    35 Ga.
    0.11"
    2 5/8"0.71"Round
    0.11"Split
    0000000000000000
    34 Ga.
    0.111"
    2 5/8"0.71"Round
    0.111"Split
    0000000000000000
    33 Ga.
    0.113"
    2 5/8"0.71"Round
    0.113"Split
    0000000000000000
    32 Ga.
    0.116"
    2 3/4"0.7"Round
    0.116"Split
    0000000000000000
    31 Ga.
    0.12"
    2 3/4"0.7"Round
    0.12"Split
    0000000000000000
    30 Ga.
    0.1285"
    2 3/4"0.74"Round
    0.1285"Split
    0000000000000000
    29 Ga.
    0.136"
    2 7/8"0.73"Round
    0.136"Split
    0000000000000000
    28 Ga.
    0.1405"
    2 7/8"0.73"Round
    0.1405"Split
    0000000000000000
    27 Ga.
    0.144"
    3"0.78"Round
    0.144"Split
    0000000000000000
    26 Ga.
    0.147"
    3"0.78"Round
    0.147"Split
    0000000000000000
    25 Ga.
    0.1495"
    3"0.78"Round
    0.1495"Split
    0000000000000000
    24 Ga.
    0.152"
    3 1/8"0.77"Round
    0.152"Split
    0000000000000000
    23 Ga.
    0.154"
    3 1/8"0.77"Round
    0.154"Split
    0000000000000000
    22 Ga.
    0.157"
    3 1/8"0.83"Round
    0.157"Split
    0000000000000000
    21 Ga.
    0.159"
    3 1/4"0.82"Round
    0.159"Split
    0000000000000000
    20 Ga.
    0.161"
    3 1/4"0.82"Round
    0.161"Split
    0000000000000000
    19 Ga.
    0.166"
    3 1/4"0.81"Round
    0.166"Split
    0000000000000000
    18 Ga.
    0.1695"
    3 1/4"0.81"Round
    0.1695"Split
    0000000000000000
    17 Ga.
    0.173"
    3 3/8"0.87"Round
    0.173"Split
    0000000000000000
    16 Ga.
    0.177"
    3 3/8"0.86"Round
    0.177"Split
    0000000000000000
    15 Ga.
    0.18"
    3 3/8"0.86"Round
    0.18"Split
    0000000000000000
    14 Ga.
    0.182"
    3 3/8"0.85"Round
    0.182"Split
    0000000000000000
    13 Ga.
    0.185"
    3 1/2"0.85"Round
    0.185"Split
    0000000000000000
    12 Ga.
    0.189"
    3 1/2"0.9"Round
    0.189"Split
    0000000000000000
    11 Ga.
    0.191"
    3 1/2"0.9"Round
    0.191"Split
    0000000000000000
    10 Ga.
    0.1935"
    3 5/8"0.9"Round
    0.1935"Split
    0000000000000000
    9 Ga.
    0.196"
    3 5/8"0.89"Round
    0.196"Split
    0000000000000000
    8 Ga.
    0.199"
    3 5/8"0.89"Round
    0.199"Split
    0000000000000000
    7 Ga.
    0.201"
    3 5/8"0.89"Round
    0.201"Split
    0000000000000000
    6 Ga.
    0.204"
    3 3/4"0.94"Round
    0.204"Split
    0000000000000000
    5 Ga.
    0.2055"
    3 3/4"0.94"Round
    0.2055"Split
    0000000000000000
    4 Ga.
    0.209"
    3 3/4"0.94"Round
    0.209"Split
    0000000000000000
    3 Ga.
    0.213"
    3 3/4"0.93"Round
    0.213"Split
    0000000000000000
    2 Ga.
    0.221"
    3 7/8"0.98"Round
    0.221"Split
    0000000000000000
    1 Ga.
    0.228"
    3 7/8"0.97"Round
    0.228"Split
    0000000000000000
     

    Chip-Clearing High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, High Helix Flute, Round Shank.

    Jobbers' Length

    High Helix Flute

    Round Shank

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Standard

    Split

    With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.
    High Helix Flute—Less aggressive than parabolic flutes for cleaner cuts in soft metals.
    Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Black Oxide
    52 Ga.
    0.0635"
    1 7/8"0.7"ParabolicRound
    0.0635"Split
    0000000000000
    51 Ga.
    0.067"
    2"0.9"ParabolicRound
    0.067"Split
    000000000000
    50 Ga.
    0.07"
    2"0.9"ParabolicRound
    0.07"Split
    000000000000
    49 Ga.
    0.073"
    2"0.9"ParabolicRound
    0.073"Split
    000000000000
    48 Ga.
    0.076"
    2"0.8"ParabolicRound
    0.076"Split
    000000000000
    47 Ga.
    0.0785"
    2"0.8"ParabolicRound
    0.0785"Split
    000000000000
    46 Ga.
    0.081"
    2 1/8"1"ParabolicRound
    0.081"Split
    000000000000
    45 Ga.
    0.082"
    2 1/8"1"ParabolicRound
    0.082"Split
    000000000000
    44 Ga.
    0.086"
    2 1/8"1"ParabolicRound
    0.086"Split
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.1"ParabolicRound
    0.089"Split
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.1"ParabolicRound
    0.0935"Split
    000000000000
    41 Ga.
    0.096"
    2 3/8"1.2"ParabolicRound
    0.096"Split
    000000000000
    40 Ga.
    0.098"
    2 3/8"1.2"ParabolicRound
    0.098"Split
    000000000000
    39 Ga.
    0.0995"
    2 3/8"1.2"ParabolicRound
    0.0995"Split
    000000000000
    38 Ga.
    0.1015"
    2 1/2"1.2"ParabolicRound
    0.1015"Split
    000000000000
    37 Ga.
    0.104"
    2 1/2"1.2"ParabolicRound
    0.104"Split
    000000000000
    36 Ga.
    0.1065"
    2 1/2"1.2"ParabolicRound
    0.1065"Split
    000000000000
    35 Ga.
    0.11"
    2 5/8"1.3"ParabolicRound
    0.11"Split
    000000000000
    34 Ga.
    0.111"
    2 5/8"1.3"ParabolicRound
    0.111"Split
    000000000000
    32 Ga.
    0.116"
    2 3/4"1.4"ParabolicRound
    0.116"Split
    000000000000
    31 Ga.
    0.12"
    2 3/4"1.4"ParabolicRound
    0.12"Split
    000000000000
    30 Ga.
    0.1285"
    2 3/4"1.4"ParabolicRound
    0.1285"Split
    000000000000
    29 Ga.
    0.136"
    2 7/8"1.5"ParabolicRound
    0.136"Split
    000000000000
    28 Ga.
    0.1405"
    2 7/8"1.5"ParabolicRound
    0.1405"Split
    000000000000
    27 Ga.
    0.144"
    3"1.6"ParabolicRound
    0.144"Split
    000000000000
    26 Ga.
    0.147"
    3"1.6"ParabolicRound
    0.147"Split
    000000000000
    25 Ga.
    0.1495"
    3"1.6"ParabolicRound
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.7"ParabolicRound
    0.152"Split
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.7"ParabolicRound
    0.154"Split
    000000000000
    22 Ga.
    0.157"
    3 1/8"1.7"ParabolicRound
    0.157"Split
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.8"ParabolicRound
    0.159"Split
    000000000000
    20 Ga.
    0.161"
    3 1/4"1.8"ParabolicRound
    0.161"Split
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.8"ParabolicRound
    0.166"Split
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.8"ParabolicRound
    0.1695"Split
    000000000000
    17 Ga.
    0.173"
    3 3/8"1.8"ParabolicRound
    0.173"Split
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.8"ParabolicRound
    0.177"Split
    000000000000
    15 Ga.
    0.18"
    3 3/8"1.8"ParabolicRound
    0.18"Split
    000000000000
    14 Ga.
    0.182"
    3 3/8"1.8"ParabolicRound
    0.182"Split
    000000000000
    13 Ga.
    0.185"
    3 1/2"1.9"ParabolicRound
    0.185"Split
    000000000000
    12 Ga.
    0.189"
    3 1/2"1.9"ParabolicRound
    0.189"Split
    000000000000
    11 Ga.
    0.191"
    3 1/2"1.9"ParabolicRound
    0.191"Split
    000000000000
    10 Ga.
    0.1935"
    3 5/8"2.1"ParabolicRound
    0.1935"Split
    000000000000
    9 Ga.
    0.196"
    3 5/8"2"ParabolicRound
    0.196"Split
    000000000000
    8 Ga.
    0.199"
    3 5/8"2"ParabolicRound
    0.199"Split
    000000000000
    7 Ga.
    0.201"
    3 5/8"2"ParabolicRound
    0.201"Split
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.1"ParabolicRound
    0.204"Split
    000000000000
    5 Ga.
    0.2055"
    3 3/4"2.1"ParabolicRound
    0.2055"Split
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.1"ParabolicRound
    0.209"Split
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.1"ParabolicRound
    0.213"Split
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.2"ParabolicRound
    0.221"Split
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.2"ParabolicRound
    0.228"Split
    000000000000
     
    Titanium Nitride (TiN) Coated
    52 Ga.
    0.0635"
    1 7/8"0.7"ParabolicRound
    0.0635"Split
    0000000000000
    51 Ga.
    0.067"
    2"0.9"ParabolicRound
    0.067"Split
    0000000000000
    50 Ga.
    0.07"
    2"0.9"ParabolicRound
    0.07"Split
    0000000000000
    49 Ga.
    0.073"
    2"0.9"ParabolicRound
    0.073"Split
    0000000000000
    48 Ga.
    0.076"
    2"0.8"ParabolicRound
    0.076"Split
    0000000000000
    47 Ga.
    0.0785"
    2"0.8"ParabolicRound
    0.0785"Split
    0000000000000
    46 Ga.
    0.081"
    2 1/8"1"ParabolicRound
    0.081"Split
    0000000000000
    45 Ga.
    0.082"
    2 1/8"1"ParabolicRound
    0.082"Split
    000000000000
    44 Ga.
    0.086"
    2 1/8"1"ParabolicRound
    0.086"Split
    0000000000000
    43 Ga.
    0.089"
    2 1/4"1.1"ParabolicRound
    0.089"Split
    0000000000000
    42 Ga.
    0.0935"
    2 1/4"1.1"ParabolicRound
    0.0935"Split
    0000000000000
    41 Ga.
    0.096"
    2 3/8"1.2"ParabolicRound
    0.096"Split
    0000000000000
    40 Ga.
    0.098"
    2 3/8"1.2"ParabolicRound
    0.098"Split
    0000000000000
    39 Ga.
    0.0995"
    2 3/8"1.2"ParabolicRound
    0.0995"Split
    0000000000000
    38 Ga.
    0.1015"
    2 1/2"1.2"ParabolicRound
    0.1015"Split
    0000000000000
    37 Ga.
    0.104"
    2 1/2"1.2"ParabolicRound
    0.104"Split
    0000000000000
    36 Ga.
    0.1065"
    2 1/2"1.2"ParabolicRound
    0.1065"Split
    0000000000000
    35 Ga.
    0.11"
    2 5/8"1.3"ParabolicRound
    0.11"Split
    000000000000
    34 Ga.
    0.111"
    2 5/8"1.3"ParabolicRound
    0.111"Split
    0000000000000
    33 Ga.
    0.113"
    2 5/8"1.3"ParabolicRound
    0.113"Split
    0000000000000
    32 Ga.
    0.116"
    2 3/4"1.4"ParabolicRound
    0.116"Split
    0000000000000
    31 Ga.
    0.12"
    2 3/4"1.4"ParabolicRound
    0.12"Split
    0000000000000
    30 Ga.
    0.1285"
    2 3/4"1.4"ParabolicRound
    0.1285"Split
    0000000000000
    29 Ga.
    0.136"
    2 7/8"1.5"ParabolicRound
    0.136"Split
    0000000000000
    28 Ga.
    0.1405"
    2 7/8"1.5"ParabolicRound
    0.1405"Split
    0000000000000
    27 Ga.
    0.144"
    3"1.6"ParabolicRound
    0.144"Split
    0000000000000
    26 Ga.
    0.147"
    3"1.6"ParabolicRound
    0.147"Split
    0000000000000
    25 Ga.
    0.1495"
    3"1.6"ParabolicRound
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.7"ParabolicRound
    0.152"Split
    0000000000000
    23 Ga.
    0.154"
    3 1/8"1.7"ParabolicRound
    0.154"Split
    00000000000000
    22 Ga.
    0.157"
    3 1/8"1.7"ParabolicRound
    0.157"Split
    00000000000000
    21 Ga.
    0.159"
    3 1/4"1.8"ParabolicRound
    0.159"Split
    00000000000000
    20 Ga.
    0.161"
    3 1/4"1.8"ParabolicRound
    0.161"Split
    0000000000000
    19 Ga.
    0.166"
    3 1/4"1.8"ParabolicRound
    0.166"Split
    00000000000000
    18 Ga.
    0.1695"
    3 1/4"1.8"ParabolicRound
    0.1695"Split
    00000000000000
    17 Ga.
    0.173"
    3 3/8"1.8"ParabolicRound
    0.173"Split
    00000000000000
    16 Ga.
    0.177"
    3 3/8"1.8"ParabolicRound
    0.177"Split
    00000000000000
    15 Ga.
    0.18"
    3 3/8"1.8"ParabolicRound
    0.18"Split
    0000000000000
    14 Ga.
    0.182"
    3 3/8"1.8"ParabolicRound
    0.182"Split
    00000000000000
    13 Ga.
    0.185"
    3 1/2"1.9"ParabolicRound
    0.185"Split
    00000000000000
    12 Ga.
    0.189"
    3 1/2"1.9"ParabolicRound
    0.189"Split
    00000000000000
    11 Ga.
    0.191"
    3 1/2"1.9"ParabolicRound
    0.191"Split
    00000000000000
    10 Ga.
    0.1935"
    3 5/8"2.1"ParabolicRound
    0.1935"Split
    00000000000000
    9 Ga.
    0.196"
    3 5/8"2"ParabolicRound
    0.196"Split
    00000000000000
    8 Ga.
    0.199"
    3 5/8"2"ParabolicRound
    0.199"Split
    00000000000000
    7 Ga.
    0.201"
    3 5/8"2"ParabolicRound
    0.201"Split
    00000000000000
    6 Ga.
    0.204"
    3 3/4"2.1"ParabolicRound
    0.204"Split
    00000000000000
    5 Ga.
    0.2055"
    3 3/4"2.1"ParabolicRound
    0.2055"Split
    0000000000000
    4 Ga.
    0.209"
    3 3/4"2.1"ParabolicRound
    0.209"Split
    00000000000000
    3 Ga.
    0.213"
    3 3/4"2.1"ParabolicRound
    0.213"Split
    00000000000000
    2 Ga.
    0.221"
    3 7/8"2.2"ParabolicRound
    0.221"Split
    00000000000000
    1 Ga.
    0.228"
    3 7/8"2.2"ParabolicRound
    0.228"Split
    00000000000000
     
    Uncoated
    80 Ga.
    0.0135"
    3/4"0.1"High HelixRound
    0.0135"Standard
    000000000000
    79 Ga.
    0.0145"
    3/4"0.1"High HelixRound
    0.0145"Standard
    000000000000
    78 Ga.
    0.016"
    7/8"0.16"High HelixRound
    0.016"Standard
    000000000000
    77 Ga.
    0.018"
    7/8"0.16"High HelixRound
    0.018"Standard
    000000000000
    76 Ga.
    0.02"
    7/8"0.15"High HelixRound
    0.02"Standard
    000000000000
    75 Ga.
    0.021"
    1"0.21"High HelixRound
    0.021"Standard
    000000000000
    74 Ga.
    0.0225"
    1"0.21"High HelixRound
    0.0225"Standard
    000000000000
    73 Ga.
    0.024"
    1 1/8"0.27"High HelixRound
    0.024"Standard
    000000000000
    72 Ga.
    0.025"
    1 1/8"0.27"High HelixRound
    0.025"Standard
    000000000000
    71 Ga.
    0.026"
    1 1/4"0.33"High HelixRound
    0.026"Standard
    000000000000
    70 Ga.
    0.028"
    1 1/4"0.33"High HelixRound
    0.028"Standard
    000000000000
    69 Ga.
    0.0292"
    1 3/8"0.45"High HelixRound
    0.0292"Standard
    000000000000
    68 Ga.
    0.031"
    1 3/8"0.45"High HelixRound
    0.031"Standard
    000000000000
    67 Ga.
    0.032"
    1 3/8"0.45"High HelixRound
    0.032"Standard
    000000000000
    66 Ga.
    0.033"
    1 3/8"0.45"High HelixRound
    0.033"Standard
    000000000000
    65 Ga.
    0.035"
    1 1/2"0.57"High HelixRound
    0.035"Standard
    000000000000
    64 Ga.
    0.036"
    1 1/2"0.57"High HelixRound
    0.036"Standard
    000000000000
    63 Ga.
    0.037"
    1 1/2"0.57"High HelixRound
    0.037"Standard
    000000000000
    62 Ga.
    0.038"
    1 1/2"0.56"High HelixRound
    0.038"Standard
    000000000000
    61 Ga.
    0.039"
    1 5/8"0.62"High HelixRound
    0.039"Standard
    000000000000
    60 Ga.
    0.04"
    1 5/8"0.62"High HelixRound
    0.04"Standard
    000000000000
    59 Ga.
    0.041"
    1 5/8"0.62"High HelixRound
    0.041"Standard
    000000000000
    58 Ga.
    0.042"
    1 5/8"0.62"High HelixRound
    0.042"Standard
    000000000000
    57 Ga.
    0.043"
    1 3/4"0.68"High HelixRound
    0.043"Standard
    000000000000
    56 Ga.
    0.0465"
    1 3/4"0.68"High HelixRound
    0.0465"Standard
    000000000000
    55 Ga.
    0.052"
    1 7/8"0.79"High HelixRound
    0.052"Standard
    000000000000
    54 Ga.
    0.055"
    1 7/8"0.79"High HelixRound
    0.055"Standard
    000000000000
    53 Ga.
    0.0595"
    1 7/8"0.78"High HelixRound
    0.0595"Standard
    000000000000
    52 Ga.
    0.0635"
    1 7/8"0.7"ParabolicRound
    0.0635"Split
    000000000000
    52 Ga.
    0.0635"
    1 7/8"0.78"High HelixRound
    0.0635"Standard
    000000000000
    51 Ga.
    0.067"
    2"0.9"High HelixRound
    0.067"Standard
    000000000000
    51 Ga.
    0.067"
    2"0.9"ParabolicRound
    0.067"Split
    000000000000
    50 Ga.
    0.07"
    2"0.89"High HelixRound
    0.07"Standard
    000000000000
    50 Ga.
    0.07"
    2"0.9"ParabolicRound
    0.07"Split
    00000000000
    49 Ga.
    0.073"
    2"0.89"High HelixRound
    0.073"Standard
    000000000000
    49 Ga.
    0.073"
    2"0.9"ParabolicRound
    0.073"Split
    000000000000
    48 Ga.
    0.076"
    2"0.8"ParabolicRound
    0.076"Split
    000000000000
    48 Ga.
    0.076"
    2"0.88"High HelixRound
    0.076"Standard
    000000000000
    47 Ga.
    0.0785"
    2"0.8"ParabolicRound
    0.0785"Split
    000000000000
    47 Ga.
    0.0785"
    2"0.88"High HelixRound
    0.0785"Standard
    000000000000
    46 Ga.
    0.081"
    2 1/8"1"High HelixRound
    0.081"Standard
    000000000000
    46 Ga.
    0.081"
    2 1/8"1"ParabolicRound
    0.081"Split
    000000000000
    45 Ga.
    0.082"
    2 1/8"1"High HelixRound
    0.082"Standard
    000000000000
    45 Ga.
    0.082"
    2 1/8"1"ParabolicRound
    0.082"Split
    000000000000
    44 Ga.
    0.086"
    2 1/8"0.99"High HelixRound
    0.086"Standard
    000000000000
    44 Ga.
    0.086"
    2 1/8"1"ParabolicRound
    0.086"Split
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.1"ParabolicRound
    0.089"Split
    000000000000
    43 Ga.
    0.089"
    2 1/4"1.11"High HelixRound
    0.089"Standard
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.1"ParabolicRound
    0.0935"Split
    000000000000
    42 Ga.
    0.0935"
    2 1/4"1.11"High HelixRound
    0.0935"Standard
    000000000000
    41 Ga.
    0.096"
    2 3/8"1.2"ParabolicRound
    0.096"Split
    000000000000
    41 Ga.
    0.096"
    2 3/8"1.23"High HelixRound
    0.096"Standard
    000000000000
    40 Ga.
    0.098"
    2 3/8"1.2"ParabolicRound
    0.098"Split
    00000000000
    40 Ga.
    0.098"
    2 3/8"1.22"High HelixRound
    0.098"Standard
    000000000000
    39 Ga.
    0.0995"
    2 3/8"1.2"ParabolicRound
    0.0995"Split
    000000000000
    39 Ga.
    0.0995"
    2 3/8"1.22"High HelixRound
    0.0995"Standard
    000000000000
    38 Ga.
    0.1015"
    2 1/2"1.2"ParabolicRound
    0.1015"Split
    000000000000
    38 Ga.
    0.1015"
    2 1/2"1.28"High HelixRound
    0.1015"Standard
    000000000000
    37 Ga.
    0.104"
    2 1/2"1.2"ParabolicRound
    0.104"Split
    000000000000
    37 Ga.
    0.104"
    2 1/2"1.28"High HelixRound
    0.104"Standard
    000000000000
    36 Ga.
    0.1065"
    2 1/2"1.2"ParabolicRound
    0.1065"Split
    000000000000
    36 Ga.
    0.1065"
    2 1/2"1.27"High HelixRound
    0.1065"Standard
    000000000000
    35 Ga.
    0.11"
    2 5/8"1.3"ParabolicRound
    0.11"Split
    000000000000
    35 Ga.
    0.11"
    2 5/8"1.33"High HelixRound
    0.11"Standard
    000000000000
    33 Ga.
    0.113"
    2 5/8"1.3"ParabolicRound
    0.113"Split
    000000000000
    33 Ga.
    0.113"
    2 5/8"1.33"High HelixRound
    0.113"Standard
    000000000000
    32 Ga.
    0.116"
    2 3/4"1.4"ParabolicRound
    0.116"Split
    000000000000
    32 Ga.
    0.116"
    2 3/4"1.45"High HelixRound
    0.116"Standard
    000000000000
    31 Ga.
    0.12"
    2 3/4"1.4"ParabolicRound
    0.12"Split
    000000000000
    31 Ga.
    0.12"
    2 3/4"1.44"High HelixRound
    0.12"Standard
    000000000000
    30 Ga.
    0.1285"
    2 3/4"1.4"ParabolicRound
    0.1285"Split
    00000000000
    30 Ga.
    0.1285"
    2 3/4"1.43"High HelixRound
    0.1285"Standard
    000000000000
    29 Ga.
    0.136"
    2 7/8"1.5"ParabolicRound
    0.136"Split
    000000000000
    29 Ga.
    0.136"
    2 7/8"1.54"High HelixRound
    0.136"Standard
    000000000000
    28 Ga.
    0.1405"
    2 7/8"1.5"ParabolicRound
    0.1405"Split
    000000000000
    28 Ga.
    0.1405"
    2 7/8"1.53"High HelixRound
    0.1405"Standard
    000000000000
    27 Ga.
    0.144"
    3"1.6"ParabolicRound
    0.144"Split
    000000000000
    27 Ga.
    0.144"
    3"1.65"High HelixRound
    0.144"Standard
    000000000000
    26 Ga.
    0.147"
    3"1.6"ParabolicRound
    0.147"Split
    000000000000
    26 Ga.
    0.147"
    3"1.65"High HelixRound
    0.147"Standard
    000000000000
    25 Ga.
    0.1495"
    3"1.6"ParabolicRound
    0.1495"Split
    000000000000
    25 Ga.
    0.1495"
    3"1.65"High HelixRound
    0.1495"Standard
    000000000000
    24 Ga.
    0.152"
    3 1/8"1.77"High HelixRound
    0.152"Standard
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.7"ParabolicRound
    0.154"Split
    000000000000
    23 Ga.
    0.154"
    3 1/8"1.76"High HelixRound
    0.154"Standard
    000000000000
    22 Ga.
    0.157"
    3 1/8"1.7"ParabolicRound
    0.157"Split
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.8"ParabolicRound
    0.159"Split
    000000000000
    21 Ga.
    0.159"
    3 1/4"1.88"High HelixRound
    0.159"Standard
    000000000000
    20 Ga.
    0.161"
    3 1/4"1.8"ParabolicRound
    0.161"Split
    00000000000
    20 Ga.
    0.161"
    3 1/4"1.88"High HelixRound
    0.161"Standard
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.8"ParabolicRound
    0.166"Split
    000000000000
    19 Ga.
    0.166"
    3 1/4"1.87"High HelixRound
    0.166"Standard
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.8"ParabolicRound
    0.1695"Split
    000000000000
    18 Ga.
    0.1695"
    3 1/4"1.87"High HelixRound
    0.1695"Standard
    000000000000
    17 Ga.
    0.173"
    3 3/8"1.8"ParabolicRound
    0.173"Split
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.8"ParabolicRound
    0.177"Split
    000000000000
    16 Ga.
    0.177"
    3 3/8"1.92"High HelixRound
    0.177"Standard
    000000000000
    15 Ga.
    0.18"
    3 3/8"1.8"ParabolicRound
    0.18"Split
    000000000000
    14 Ga.
    0.182"
    3 3/8"1.8"ParabolicRound
    0.182"Split
    000000000000
    13 Ga.
    0.185"
    3 1/2"1.9"ParabolicRound
    0.185"Split
    000000000000
    13 Ga.
    0.185"
    3 1/2"2.03"High HelixRound
    0.185"Standard
    000000000000
    12 Ga.
    0.189"
    3 1/2"1.9"ParabolicRound
    0.189"Split
    000000000000
    12 Ga.
    0.189"
    3 1/2"2.02"High HelixRound
    0.189"Standard
    000000000000
    11 Ga.
    0.191"
    3 1/2"1.9"ParabolicRound
    0.191"Split
    000000000000
    11 Ga.
    0.191"
    3 1/2"2.02"High HelixRound
    0.191"Standard
    000000000000
    10 Ga.
    0.1935"
    3 5/8"2.1"ParabolicRound
    0.1935"Split
    00000000000
    10 Ga.
    0.1935"
    3 5/8"2.14"High HelixRound
    0.1935"Standard
    000000000000
    9 Ga.
    0.196"
    3 5/8"2"ParabolicRound
    0.196"Split
    000000000000
    9 Ga.
    0.196"
    3 5/8"2.14"High HelixRound
    0.196"Standard
    000000000000
    8 Ga.
    0.199"
    3 5/8"2"ParabolicRound
    0.199"Split
    000000000000
    7 Ga.
    0.201"
    3 5/8"2"ParabolicRound
    0.201"Split
    000000000000
    7 Ga.
    0.201"
    3 5/8"2.13"High HelixRound
    0.201"Standard
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.1"ParabolicRound
    0.204"Split
    000000000000
    6 Ga.
    0.204"
    3 3/4"2.19"High HelixRound
    0.204"Standard
    000000000000
    5 Ga.
    0.2055"
    3 3/4"2.1"ParabolicRound
    0.2055"Split
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.1"ParabolicRound
    0.209"Split
    000000000000
    4 Ga.
    0.209"
    3 3/4"2.18"High HelixRound
    0.209"Standard
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.1"ParabolicRound
    0.213"Split
    000000000000
    3 Ga.
    0.213"
    3 3/4"2.18"High HelixRound
    0.213"Standard
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.2"ParabolicRound
    0.221"Split
    000000000000
    2 Ga.
    0.221"
    3 7/8"2.29"High HelixRound
    0.221"Standard
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.2"ParabolicRound
    0.228"Split
    000000000000
    1 Ga.
    0.228"
    3 7/8"2.28"High HelixRound
    0.228"Standard
    000000000000
     

    High-Speed Steel Drill Bits for Plastic

    The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics. They're made of wear-resistant high-speed steel.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits for Plastic, Jobbers' Length.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Each
    Uncoated
    31 Ga.
    0.12"
    2 3/4"1"Round
    0.12"60°Standard
    00000000000000
    30 Ga.
    0.1285"
    2 3/4"1"Round
    0.1285"60°Standard
    0000000000000
    29 Ga.
    0.136"
    2 7/8"1.12"Round
    0.136"60°Standard
    0000000000000
    28 Ga.
    0.1405"
    2 7/8"1.12"Round
    0.1405"60°Standard
    0000000000000
    27 Ga.
    0.144"
    3"1.25"Round
    0.144"60°Standard
    0000000000000
    26 Ga.
    0.147"
    3"1.25"Round
    0.147"60°Standard
    0000000000000
    25 Ga.
    0.1495"
    3"1.25"Round
    0.1495"60°Standard
    0000000000000
    24 Ga.
    0.152"
    3 1/8"1.31"Round
    0.152"60°Standard
    0000000000000
    23 Ga.
    0.154"
    3 1/8"1.31"Round
    0.154"60°Standard
    0000000000000
    22 Ga.
    0.157"
    3 1/8"1.31"Round
    0.157"60°Standard
    0000000000000
    21 Ga.
    0.159"
    3 1/4"1.37"Round
    0.159"60°Standard
    0000000000000
    20 Ga.
    0.161"
    3 1/4"1.37"Round
    0.161"60°Standard
    0000000000000
    19 Ga.
    0.166"
    3 1/4"1.37"Round
    0.166"60°Standard
    0000000000000
    18 Ga.
    0.1695"
    3 1/4"1.37"Round
    0.1695"60°Standard
    0000000000000
    17 Ga.
    0.173"
    3 3/8"1.5"Round
    0.173"60°Standard
    0000000000000
    16 Ga.
    0.177"
    3 3/8"1.5"Round
    0.177"60°Standard
    0000000000000
    15 Ga.
    0.18"
    3 3/8"1.5"Round
    0.18"60°Standard
    0000000000000
    14 Ga.
    0.182"
    3 3/8"1.5"Round
    0.182"60°Standard
    0000000000000
    13 Ga.
    0.185"
    3 1/2"1.62"Round
    0.185"60°Standard
    0000000000000
    12 Ga.
    0.189"
    3 1/2"1.62"Round
    0.189"60°Standard
    0000000000000
    11 Ga.
    0.191"
    3 1/2"1.62"Round
    0.191"60°Standard
    0000000000000
    10 Ga.
    0.1935"
    3 5/8"1.75"Round
    0.1935"60°Standard
    0000000000000
    9 Ga.
    0.196"
    3 5/8"1.75"Round
    0.196"60°Standard
    0000000000000
    8 Ga.
    0.199"
    3 5/8"1.75"Round
    0.199"60°Standard
    0000000000000
    7 Ga.
    0.201"
    3 5/8"1.75"Round
    0.201"60°Standard
    0000000000000
    6 Ga.
    0.204"
    3 3/4"1.75"Round
    0.204"60°Standard
    0000000000000
    5 Ga.
    0.2055"
    3 3/4"1.75"Round
    0.2055"60°Standard
    0000000000000
    4 Ga.
    0.209"
    3 3/4"1.75"Round
    0.209"60°Standard
    0000000000000
    3 Ga.
    0.213"
    3 3/4"1.75"Round
    0.213"60°Standard
    0000000000000
    2 Ga.
    0.221"
    3 7/8"1.87"Round
    0.221"60°Standard
    0000000000000
    1 Ga.
    0.228"
    3 7/8"1.87"Round
    0.228"60°Standard
    0000000000000
     

    Expanded-Shank Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Expanded-Shank Carbide Drill Bits, Jobbers' Length.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Jobbers' Length

    Standard

    The shank fits the same-size chuck as standard drill bits, so you can spend less time setting up. Because these bits make very small holes, they’re often used for drilling circuit boards. Carbide bits are the the hardest and most wear resistant. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Aluminum Nitride (TiAlN) Coated—No drill bits last longer. These are the best for high-speed, high-temperature drilling of very hard and abrasive materials, including titanium and fiberglass.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Each
    Jobbers' Length
     
    Titanium Aluminum Nitride (TiAlN) Coated
    80 Ga.
    0.0135"
    1 1/2"0.14"Expanded Round
    1/8"Four Facet
    0000000000000
    79 Ga.
    0.0145"
    1 1/2"0.14"Expanded Round
    1/8"Four Facet
    0000000000000
    78 Ga.
    0.016"
    1 1/2"0.14"Expanded Round
    1/8"Four Facet
    0000000000000
    77 Ga.
    0.018"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    76 Ga.
    0.02"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    75 Ga.
    0.021"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    74 Ga.
    0.0225"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    73 Ga.
    0.024"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    72 Ga.
    0.025"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    71 Ga.
    0.026"
    1 1/2"0.19"Expanded Round
    1/8"Four Facet
    0000000000000
    70 Ga.
    0.028"
    1 1/2"0.24"Expanded Round
    1/8"Four Facet
    000000000000
    69 Ga.
    0.0292"
    1 1/2"0.24"Expanded Round
    1/8"Four Facet
    0000000000000
    68 Ga.
    0.031"
    1 1/2"0.3"Expanded Round
    1/8"Four Facet
    0000000000000
    67 Ga.
    0.032"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    66 Ga.
    0.033"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    65 Ga.
    0.035"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    64 Ga.
    0.036"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    63 Ga.
    0.037"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    62 Ga.
    0.038"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    61 Ga.
    0.039"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    60 Ga.
    0.04"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    000000000000
    59 Ga.
    0.041"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    58 Ga.
    0.042"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    57 Ga.
    0.043"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    56 Ga.
    0.0465"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    55 Ga.
    0.052"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    54 Ga.
    0.055"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    53 Ga.
    0.0595"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    0000000000000
    52 Ga.
    0.0635"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    51 Ga.
    0.067"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    50 Ga.
    0.07"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    000000000000
    49 Ga.
    0.073"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    48 Ga.
    0.076"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    47 Ga.
    0.0785"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    46 Ga.
    0.081"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    45 Ga.
    0.082"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    44 Ga.
    0.086"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    43 Ga.
    0.089"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    42 Ga.
    0.0935"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    41 Ga.
    0.096"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    40 Ga.
    0.098"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    000000000000
    39 Ga.
    0.0995"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    38 Ga.
    0.1015"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    37 Ga.
    0.104"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    36 Ga.
    0.1065"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    35 Ga.
    0.11"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    34 Ga.
    0.111"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    33 Ga.
    0.113"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    32 Ga.
    0.116"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
    31 Ga.
    0.12"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    0000000000000
     
    Uncoated
    80 Ga.
    0.0135"
    1 1/2"0.22"Expanded Round
    1/8"Standard
    000000000000
    79 Ga.
    0.0145"
    1 1/2"0.22"Expanded Round
    1/8"Standard
    000000000000
    78 Ga.
    0.016"
    1 1/2"0.22"Expanded Round
    1/8"Standard
    000000000000
    77 Ga.
    0.018"
    1 1/2"0.22"Expanded Round
    1/8"Standard
    000000000000
    76 Ga.
    0.02"
    1 1/2"0.29"Expanded Round
    1/8"Standard
    00000000000
    75 Ga.
    0.021"
    1 1/2"0.28"Expanded Round
    1/8"Standard
    00000000000
    74 Ga.
    0.0225"
    1 1/2"0.28"Expanded Round
    1/8"Standard
    00000000000
    73 Ga.
    0.024"
    1 1/2"0.28"Expanded Round
    1/8"Standard
    00000000000
    72 Ga.
    0.025"
    1 1/2"0.28"Expanded Round
    1/8"Standard
    00000000000
    71 Ga.
    0.026"
    1 1/2"0.28"Expanded Round
    1/8"Standard
    00000000000
    70 Ga.
    0.028"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    69 Ga.
    0.0292"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    68 Ga.
    0.031"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    67 Ga.
    0.032"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    66 Ga.
    0.033"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    65 Ga.
    0.035"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    64 Ga.
    0.036"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    63 Ga.
    0.037"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    62 Ga.
    0.038"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    61 Ga.
    0.039"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    60 Ga.
    0.04"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    59 Ga.
    0.041"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    58 Ga.
    0.042"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    57 Ga.
    0.043"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    56 Ga.
    0.0465"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    55 Ga.
    0.052"
    1 1/2"0.32"Expanded Round
    1/8"Standard
    00000000000
    54 Ga.
    0.055"
    1 1/2"0.31"Expanded Round
    1/8"Standard
    00000000000
    53 Ga.
    0.0595"
    1 1/2"0.39"Expanded Round
    1/8"Standard
    00000000000
    52 Ga.
    0.0635"
    1 1/2"0.38"Expanded Round
    1/8"Standard
    00000000000
    51 Ga.
    0.067"
    1 1/2"0.37"Expanded Round
    1/8"Standard
    00000000000
    50 Ga.
    0.07"
    1 1/2"0.37"Expanded Round
    1/8"Standard
    00000000000
    49 Ga.
    0.073"
    1 1/2"0.37"Expanded Round
    1/8"Standard
    00000000000
    48 Ga.
    0.076"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    00000000000
    47 Ga.
    0.0785"
    1 1/2"0.36"Expanded Round
    1/8"Standard
    00000000000
    46 Ga.
    0.081"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    45 Ga.
    0.082"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    44 Ga.
    0.086"
    1 1/2"0.35"Expanded Round
    1/8"Standard
    00000000000
    43 Ga.
    0.089"
    1 1/2"0.34"Expanded Round
    1/8"Standard
    00000000000
    42 Ga.
    0.0935"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    41 Ga.
    0.096"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    40 Ga.
    0.098"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    39 Ga.
    0.0995"
    1 1/2"0.33"Expanded Round
    1/8"Standard
    00000000000
    38 Ga.
    0.1015"
    1 1/2"0.32"Expanded Round
    1/8"Standard
    00000000000
    37 Ga.
    0.104"
    1 1/2"0.32"Expanded Round
    1/8"Standard
    00000000000
    36 Ga.
    0.1065"
    1 1/2"0.32"Expanded Round
    1/8"Standard
    00000000000
    35 Ga.
    0.11"
    1 1/2"0.31"Expanded Round
    1/8"Standard
    00000000000
    34 Ga.
    0.111"
    1 1/2"0.31"Expanded Round
    1/8"Standard
    00000000000
    33 Ga.
    0.113"
    1 1/2"0.31"Expanded Round
    1/8"Standard
    00000000000
    32 Ga.
    0.116"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    00000000000
    31 Ga.
    0.12"
    1 1/2"0.3"Expanded Round
    1/8"Standard
    00000000000
     

    Expanded-Shank Carbide Drill Bit Sets

    All of the bits in these sets have the same shank diameter, so you can quickly change sizes without swapping out the collet on your tool. Because of their small size, they are often used for drilling holes in circuit boards. Carbide bits are the the hardest and most wear resistant. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' LengthAbout Jobbers' Length
    Image of Product. Front orientation. Drill Bits. Expanded-Shank Carbide Drill Bit Sets, Jobbers' Length.
    These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Size
    No. of
    Pieces
    Drill Bit Sizes
    Included
    System of
    Measurement
    Drill Bit Point
    Style
    Container
    Type
    Each
    Uncoated
    1/8"1080-71 gaWire GaugeFour-Facet Point
    Plastic Case00000000000000
    1/8"1070-61 gaWire GaugeFour-Facet Point
    Plastic Case0000000000000
     

    Smooth-Finish Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Smooth-Finish Carbide Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Split

    With more cutting edges than other drill bits, these cut continuously and consistently for a smoother finish. They also stay centered to produce holes that are straighter and more accurate. However, since there’s less space between the cutting edges, they don’t clear chips as quickly. Made of carbide, these are the hardest and most wear-resistant drill bits you can buy. They stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    36 Ga.
    0.1065"
    2 1/4"1"Round
    0.1065"Split
    0000000000000
    35 Ga.
    0.11"
    2 1/4"1"Round
    0.11"Split
    000000000000
    34 Ga.
    0.111"
    2 1/4"1"Round
    0.111"Split
    000000000000
    33 Ga.
    0.113"
    2 1/4"1"Round
    0.113"Split
    000000000000
    32 Ga.
    0.116"
    2 1/4"1"Round
    0.116"Split
    00000000000
    31 Ga.
    0.12"
    2 1/4"1"Round
    0.12"Split
    000000000000
    30 Ga.
    0.1285"
    2 1/4"1.1"Round
    0.1285"Split
    000000000000
    29 Ga.
    0.136"
    2 1/2"1.1"Round
    0.136"Split
    000000000000
    28 Ga.
    0.1405"
    2 1/2"1.1"Round
    0.1405"Split
    000000000000
    27 Ga.
    0.144"
    2 1/2"1.1"Round
    0.144"Split
    000000000000
    26 Ga.
    0.147"
    2 1/2"1.1"Round
    0.147"Split
    000000000000
    25 Ga.
    0.1495"
    2 1/2"1.1"Round
    0.1495"Split
    000000000000
    24 Ga.
    0.152"
    2 1/2"1.1"Round
    0.152"Split
    000000000000
    23 Ga.
    0.154"
    2 1/2"1.1"Round
    0.154"Split
    000000000000
    22 Ga.
    0.157"
    2 1/2"1.1"Round
    0.157"Split
    00000000000
    21 Ga.
    0.159"
    2 1/2"1.1"Round
    0.159"Split
    000000000000
    20 Ga.
    0.161"
    2 1/2"1.1"Round
    0.161"Split
    000000000000
    19 Ga.
    0.166"
    2 3/4"1.3"Round
    0.166"Split
    000000000000
    18 Ga.
    0.1695"
    2 3/4"1.3"Round
    0.1695"Split
    000000000000
    17 Ga.
    0.173"
    2 3/4"1.3"Round
    0.173"Split
    000000000000
    16 Ga.
    0.177"
    2 3/4"1.3"Round
    0.177"Split
    000000000000
    15 Ga.
    0.18"
    2 3/4"1.3"Round
    0.18"Split
    000000000000
    14 Ga.
    0.182"
    2 3/4"1.3"Round
    0.182"Split
    000000000000
    13 Ga.
    0.185"
    2 3/4"1.3"Round
    0.185"Split
    000000000000
    12 Ga.
    0.189"
    2 3/4"1.3"Round
    0.189"Split
    00000000000
    11 Ga.
    0.191"
    2 3/4"1.3"Round
    0.191"Split
    000000000000
    10 Ga.
    0.1935"
    2 3/4"1.4"Round
    0.1935"Split
    000000000000
    9 Ga.
    0.196"
    3"1.4"Round
    0.196"Split
    000000000000
    8 Ga.
    0.199"
    3"1.4"Round
    0.199"Split
    000000000000
    7 Ga.
    0.201"
    3"1.4"Round
    0.201"Split
    000000000000
    6 Ga.
    0.204"
    3"1.4"Round
    0.204"Split
    000000000000
    5 Ga.
    0.2055"
    3"1.4"Round
    0.2055"Split
    000000000000
    4 Ga.
    0.209"
    3"1.4"Round
    0.209"Split
    000000000000
    3 Ga.
    0.213"
    3"1.4"Round
    0.213"Split
    000000000000
    2 Ga.
    0.221"
    3"1.4"Round
    0.221"Split
    00000000000
    1 Ga.
    0.228"
    3 1/4"1.4"Round
    0.228"Split
    000000000000
     

    Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite

    Image of Product. Front orientation. Drill Bits. Carbide Drill Bits for Carbon Fiber, Fiberglass, and Graphite, Jobbers' Length.

    Jobbers' Length

    Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Point
    Angle
    Drill Bit
    Point Type
    Bit
    Style
    Each
    Jobbers' Length
     
    Uncoated
    60 Ga.
    0.04"
    1 1/2"0.6"Round
    0.04"140°Brad
    Fluted00000000000000
    57 Ga.
    0.043"
    1 1/2"0.6"Round
    0.043"140°Brad
    Fluted0000000000000
    56 Ga.
    0.0465"
    1 1/2"0.6"Round
    0.0465"140°Brad
    Fluted0000000000000
    55 Ga.
    0.052"
    1 1/2"0.6"Round
    0.052"140°Brad
    Fluted0000000000000
    54 Ga.
    0.055"
    1 1/2"0.6"Round
    0.055"140°Brad
    Fluted0000000000000
    53 Ga.
    0.0595"
    1 1/2"0.6"Round
    0.0595"140°Brad
    Fluted0000000000000
    52 Ga.
    0.0635"
    1 1/2"0.6"Round
    0.0635"140°Brad
    Fluted0000000000000
    51 Ga.
    0.067"
    1 1/2"0.6"Round
    0.067"140°Brad
    Fluted0000000000000
    50 Ga.
    0.07"
    1 3/4"0.7"Round
    0.07"140°Brad
    Fluted0000000000000
    49 Ga.
    0.073"
    1 3/4"0.7"Round
    0.073"140°Brad
    Fluted000000000000
    48 Ga.
    0.076"
    1 3/4"0.7"Round
    0.076"140°Brad
    Fluted0000000000000
    47 Ga.
    0.0785"
    1 3/4"0.7"Round
    0.0785"140°Brad
    Fluted0000000000000
    46 Ga.
    0.081"
    1 3/4"0.7"Round
    0.081"140°Brad
    Fluted0000000000000
    45 Ga.
    0.082"
    1 3/4"0.7"Round
    0.082"140°Brad
    Fluted0000000000000
    44 Ga.
    0.086"
    2"0.8"Round
    0.086"140°Brad
    Fluted0000000000000
    43 Ga.
    0.089"
    2"0.8"Round
    0.089"140°Brad
    Fluted0000000000000
    42 Ga.
    0.0935"
    2"0.8"Round
    0.0935"140°Brad
    Fluted0000000000000
    41 Ga.
    0.096"
    2"0.8"Round
    0.096"140°Brad
    Fluted0000000000000
    40 Ga.
    0.098"
    2"0.8"Round
    0.098"140°Brad
    Fluted0000000000000
    39 Ga.
    0.0995"
    2 1/4"1"Round
    0.0995"140°Brad
    Fluted000000000000
    38 Ga.
    0.1015"
    2 1/4"1"Round
    0.1015"140°Brad
    Fluted0000000000000
    37 Ga.
    0.104"
    2 1/4"1"Round
    0.104"140°Brad
    Fluted0000000000000
    36 Ga.
    0.1065"
    2 1/4"1"Round
    0.1065"140°Brad
    Fluted0000000000000
    35 Ga.
    0.11"
    2 1/4"1"Round
    0.11"140°Brad
    Fluted0000000000000
    34 Ga.
    0.111"
    2 1/4"1"Round
    0.111"140°Brad
    Fluted0000000000000
    33 Ga.
    0.113"
    2 1/4"1"Round
    0.113"140°Brad
    Fluted0000000000000
    32 Ga.
    0.116"
    2 1/4"1"Round
    0.116"140°Brad
    Fluted0000000000000
    31 Ga.
    0.12"
    2 1/4"1"Round
    0.12"140°Brad
    Fluted0000000000000
    30 Ga.
    0.1285"
    2 1/4"1.1"Round
    0.1285"140°Brad
    Fluted0000000000000
    29 Ga.
    0.136"
    2 1/2"1.1"Round
    0.136"140°Brad
    Fluted000000000000
    28 Ga.
    0.1405"
    2 1/2"1.1"Round
    0.1405"140°Brad
    Fluted0000000000000
    27 Ga.
    0.144"
    2 1/2"1.1"Round
    0.144"140°Brad
    Fluted0000000000000
    26 Ga.
    0.147"
    2 1/2"1.1"Round
    0.147"140°Brad
    Fluted0000000000000
    25 Ga.
    0.1495"
    2 1/2"1.1"Round
    0.1495"140°Brad
    Fluted0000000000000
    24 Ga.
    0.152"
    2 1/2"1.1"Round
    0.152"140°Brad
    Fluted0000000000000
    23 Ga.
    0.154"
    2 1/2"1.1"Round
    0.154"140°Brad
    Fluted0000000000000
    22 Ga.
    0.157"
    2 1/2"1.1"Round
    0.157"140°Brad
    Fluted0000000000000
    21 Ga.
    0.159"
    2 1/2"1.1"Round
    0.159"140°Brad
    Fluted0000000000000
    20 Ga.
    0.161"
    2 1/2"1.1"Round
    0.161"140°Brad
    Fluted0000000000000
    19 Ga.
    0.166"
    2 3/4"1.3"Round
    0.166"140°Brad
    Fluted000000000000
    18 Ga.
    0.1695"
    2 3/4"1.3"Round
    0.1695"140°Brad
    Fluted0000000000000
    17 Ga.
    0.173"
    2 3/4"1.3"Round
    0.173"140°Brad
    Fluted0000000000000
    16 Ga.
    0.177"
    2 3/4"1.3"Round
    0.177"140°Brad
    Fluted0000000000000
    15 Ga.
    0.18"
    2 3/4"1.3"Round
    0.18"140°Brad
    Fluted0000000000000
    14 Ga.
    0.182"
    2 3/4"1.3"Round
    0.182"140°Brad
    Fluted0000000000000
    13 Ga.
    0.185"
    2 3/4"1.3"Round
    0.185"140°Brad
    Fluted0000000000000
    12 Ga.
    0.189"
    2 3/4"1.3"Round
    0.189"140°Brad
    Fluted0000000000000
    11 Ga.
    0.191"
    2 3/4"1.3"Round
    0.191"140°Brad
    Fluted0000000000000
    10 Ga.
    0.1935"
    2 3/4"1.3"Round
    0.1935"140°Brad
    Fluted0000000000000
    9 Ga.
    0.196"
    3"1.4"Round
    0.196"140°Brad
    Fluted000000000000
    8 Ga.
    0.199"
    3"1.4"Round
    0.199"140°Brad
    Fluted0000000000000
    7 Ga.
    0.201"
    3"1.4"Round
    0.201"140°Brad
    Fluted0000000000000
    6 Ga.
    0.204"
    3"1.4"Round
    0.204"140°Brad
    Fluted0000000000000
    5 Ga.
    0.2055"
    3"1.4"Round
    0.2055"140°Brad
    Fluted0000000000000
    4 Ga.
    0.209"
    3"1.4"Round
    0.209"140°Brad
    Fluted0000000000000
    3 Ga.
    0.213"
    3"1.4"Round
    0.213"140°Brad
    Fluted0000000000000
    2 Ga.
    0.221"
    3"1.4"Round
    0.221"140°Brad
    Fluted0000000000000
    1 Ga.
    0.228"
    3 1/4"1.4"Round
    0.228"140°Brad
    Fluted0000000000000
     

    Chip-Clearing Carbide Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Carbide Drill Bits, Jobbers' Length, Parabolic Flute, Round Shank.

    Jobbers' Length

    Parabolic Flute

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    The hardest and most wear-resistant bits, the flutes clear chips and improve coolant flow. They prevent clogs and dissipate heat that can damage the bit and the hole. Carbide bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.
    Uncoated—Excellent for a range of materials but won't last as long as coated bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Titanium Nitride (TiN) Coated
    30 Ga.
    0.1285"
    2 25/32"1.45"ParabolicRound
    0.1283"Standard
    00000000000000
    29 Ga.
    0.136"
    2 29/32"1.56"ParabolicRound
    0.1358"Standard
    000000000000
    28 Ga.
    0.1405"
    2 29/32"1.56"ParabolicRound
    0.1406"Standard
    0000000000000
    27 Ga.
    0.144"
    3 1/32"1.71"ParabolicRound
    0.1441"Standard
    0000000000000
    26 Ga.
    0.147"
    3 1/32"1.7"ParabolicRound
    0.1469"Standard
    0000000000000
    25 Ga.
    0.1495"
    3 1/32"1.7"ParabolicRound
    0.1496"Standard
    000000000000
    24 Ga.
    0.152"
    3 5/32"1.82"ParabolicRound
    0.152"Standard
    0000000000000
    23 Ga.
    0.154"
    3 5/32"1.81"ParabolicRound
    0.1539"Standard
    0000000000000
    22 Ga.
    0.157"
    3 5/32"1.81"ParabolicRound
    0.1571"Standard
    0000000000000
    21 Ga.
    0.159"
    3 5/16"1.93"ParabolicRound
    0.1591"Standard
    000000000000
    20 Ga.
    0.161"
    3 5/16"1.92"ParabolicRound
    0.161"Standard
    0000000000000
    19 Ga.
    0.166"
    3 5/16"1.92"ParabolicRound
    0.1661"Standard
    0000000000000
    18 Ga.
    0.1695"
    3 5/16"1.91"ParabolicRound
    0.1693"Standard
    0000000000000
    17 Ga.
    0.173"
    3 7/16"1.99"ParabolicRound
    0.1728"Standard
    0000000000000
    16 Ga.
    0.177"
    3 7/16"1.98"ParabolicRound
    0.1772"Standard
    0000000000000
    15 Ga.
    0.18"
    3 7/16"1.97"ParabolicRound
    0.1799"Standard
    0000000000000
    14 Ga.
    0.182"
    3 7/16"1.97"ParabolicRound
    0.1819"Standard
    0000000000000
    13 Ga.
    0.185"
    3 9/16"2.09"ParabolicRound
    0.185"Standard
    0000000000000
    12 Ga.
    0.189"
    3 9/16"2.08"ParabolicRound
    0.189"Standard
    0000000000000
    11 Ga.
    0.191"
    3 9/16"2.08"ParabolicRound
    0.1909"Standard
    0000000000000
    10 Ga.
    0.1935"
    3 21/32"2.2"ParabolicRound
    0.1937"Standard
    0000000000000
    9 Ga.
    0.196"
    3 21/32"2.19"ParabolicRound
    0.1961"Standard
    0000000000000
    8 Ga.
    0.199"
    3 21/32"2.19"ParabolicRound
    0.1992"Standard
    0000000000000
    7 Ga.
    0.201"
    3 21/32"2.19"ParabolicRound
    0.2012"Standard
    000000000000
    6 Ga.
    0.204"
    3 25/32"2.26"ParabolicRound
    0.2039"Standard
    0000000000000
    5 Ga.
    0.2055"
    3 25/32"2.26"ParabolicRound
    0.2055"Standard
    0000000000000
    4 Ga.
    0.209"
    3 25/32"2.25"ParabolicRound
    0.2091"Standard
    0000000000000
    3 Ga.
    0.213"
    3 25/32"2.25"ParabolicRound
    0.213"Standard
    000000000000
    2 Ga.
    0.221"
    3 29/32"2.36"ParabolicRound
    0.2209"Standard
    0000000000000
    1 Ga.
    0.228"
    3 29/32"2.35"ParabolicRound
    0.228"Standard
    0000000000000
     
    Uncoated
    30 Ga.
    0.1285"
    2 25/32"1.45"ParabolicRound
    0.1283"Standard
    0000000000000
    29 Ga.
    0.136"
    2 29/32"1.56"ParabolicRound
    0.1358"Standard
    000000000000
    28 Ga.
    0.1405"
    2 29/32"1.56"ParabolicRound
    0.1406"Standard
    0000000000000
    27 Ga.
    0.144"
    3 1/32"1.71"ParabolicRound
    0.1441"Standard
    0000000000000
    26 Ga.
    0.147"
    3 1/32"1.7"ParabolicRound
    0.1469"Standard
    0000000000000
    25 Ga.
    0.1495"
    3 1/32"1.7"ParabolicRound
    0.1496"Standard
    000000000000
    24 Ga.
    0.152"
    3 5/32"1.82"ParabolicRound
    0.152"Standard
    0000000000000
    23 Ga.
    0.154"
    3 5/32"1.81"ParabolicRound
    0.1539"Standard
    0000000000000
    22 Ga.
    0.157"
    3 5/32"1.81"ParabolicRound
    0.1571"Standard
    0000000000000
    21 Ga.
    0.159"
    3 5/16"1.93"ParabolicRound
    0.1591"Standard
    000000000000
    20 Ga.
    0.161"
    3 5/16"1.92"ParabolicRound
    0.161"Standard
    0000000000000
    19 Ga.
    0.166"
    3 5/16"1.92"ParabolicRound
    0.1661"Standard
    0000000000000
    18 Ga.
    0.1695"
    3 5/16"1.91"ParabolicRound
    0.1693"Standard
    0000000000000
    17 Ga.
    0.173"
    3 7/16"1.99"ParabolicRound
    0.1728"Standard
    0000000000000
    16 Ga.
    0.177"
    3 7/16"1.98"ParabolicRound
    0.1772"Standard
    0000000000000
    15 Ga.
    0.18"
    3 7/16"1.97"ParabolicRound
    0.1799"Standard
    0000000000000
    14 Ga.
    0.182"
    3 7/16"1.97"ParabolicRound
    0.1819"Standard
    0000000000000
    13 Ga.
    0.185"
    3 9/16"2.09"ParabolicRound
    0.185"Standard
    0000000000000
    12 Ga.
    0.189"
    3 9/16"2.08"ParabolicRound
    0.189"Standard
    0000000000000
    11 Ga.
    0.191"
    3 9/16"2.08"ParabolicRound
    0.1909"Standard
    0000000000000
    10 Ga.
    0.1935"
    3 21/32"2.2"ParabolicRound
    0.1937"Standard
    0000000000000
    9 Ga.
    0.196"
    3 21/32"2.19"ParabolicRound
    0.1961"Standard
    0000000000000
    8 Ga.
    0.199"
    3 21/32"2.19"ParabolicRound
    0.1992"Standard
    0000000000000
    7 Ga.
    0.201"
    3 21/32"2.19"ParabolicRound
    0.2012"Standard
    000000000000
    6 Ga.
    0.204"
    3 25/32"2.26"ParabolicRound
    0.2039"Standard
    0000000000000
    5 Ga.
    0.2055"
    3 25/32"2.26"ParabolicRound
    0.2055"Standard
    0000000000000
    4 Ga.
    0.209"
    3 25/32"2.25"ParabolicRound
    0.2091"Standard
    0000000000000
    3 Ga.
    0.213"
    3 25/32"2.25"ParabolicRound
    0.213"Standard
    000000000000
    2 Ga.
    0.221"
    3 29/32"2.36"ParabolicRound
    0.2209"Standard
    0000000000000
    1 Ga.
    0.228"
    3 29/32"2.35"ParabolicRound
    0.228"Standard
    0000000000000
     

    Left-Hand High-Speed Steel Drill Bits

    Image of Product. Side1 orientation. Drill Bits. Left-Hand High-Speed Steel Drill Bits, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Standard

    With flutes that spiral in the opposite direction of other bits, these are primarily used to remove stripped screws. Choose a bit that’s slightly smaller than the diameter of the screw’s head. Set your power tool to rotate in reverse. Slowly drill in the center of the screw head, maintaining constant pressure. As the bit penetrates, it will catch onto the screw and reverse it out of the hole. If the screw is badly stripped, you might need to punch a starter hole. Also known as reverse-flute bits. High-speed steel is the versatile choice for drilling most metals.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Each
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    1-11
    12-Up
    Jobbers' Length
     
    Uncoated
    60 Ga.
    0.04"
    1 5/8"0.6"Round
    0.04"Standard
    000000000000000000
    59 Ga.
    0.041"
    1 5/8"0.6"Round
    0.041"Standard
    0000000000000000
    58 Ga.
    0.042"
    1 5/8"0.6"Round
    0.042"Standard
    0000000000000000
    57 Ga.
    0.043"
    1 3/4"0.66"Round
    0.043"Standard
    0000000000000000
    56 Ga.
    0.0465"
    1 3/4"0.65"Round
    0.0465"Standard
    0000000000000000
    55 Ga.
    0.052"
    1 7/8"0.77"Round
    0.052"Standard
    0000000000000000
    54 Ga.
    0.055"
    1 7/8"0.76"Round
    0.055"Standard
    0000000000000000
    53 Ga.
    0.0595"
    1 7/8"0.75"Round
    0.0595"Standard
    0000000000000000
    52 Ga.
    0.0635"
    1 7/8"0.74"Round
    0.0635"Standard
    0000000000000000
    51 Ga.
    0.067"
    2"0.86"Round
    0.067"Standard
    0000000000000000
    50 Ga.
    0.07"
    2"0.86"Round
    0.07"Standard
    0000000000000000
    49 Ga.
    0.073"
    2"0.85"Round
    0.073"Standard
    0000000000000000
    48 Ga.
    0.076"
    2"0.84"Round
    0.076"Standard
    0000000000000000
    47 Ga.
    0.0785"
    2"0.84"Round
    0.0785"Standard
    0000000000000000
    46 Ga.
    0.081"
    2 1/8"0.96"Round
    0.081"Standard
    0000000000000000
    45 Ga.
    0.082"
    2 1/8"0.96"Round
    0.082"Standard
    0000000000000000
    44 Ga.
    0.086"
    2 1/8"0.95"Round
    0.086"Standard
    0000000000000000
    43 Ga.
    0.089"
    2 1/4"1.07"Round
    0.089"Standard
    0000000000000000
    42 Ga.
    0.0935"
    2 1/4"1.06"Round
    0.0935"Standard
    0000000000000000
    41 Ga.
    0.096"
    2 3/8"1.18"Round
    0.096"Standard
    0000000000000000
    40 Ga.
    0.098"
    2 3/8"1.17"Round
    0.098"Standard
    0000000000000000
    39 Ga.
    0.0995"
    2 3/8"1.17"Round
    0.0995"Standard
    0000000000000000
    38 Ga.
    0.1015"
    2 1/2"1.23"Round
    0.1015"Standard
    0000000000000000
    37 Ga.
    0.104"
    2 1/2"1.22"Round
    0.104"Standard
    0000000000000000
    36 Ga.
    0.1065"
    2 1/2"1.22"Round
    0.1065"Standard
    0000000000000000
    35 Ga.
    0.11"
    2 5/8"1.28"Round
    0.11"Standard
    0000000000000000
    34 Ga.
    0.111"
    2 5/8"1.27"Round
    0.111"Standard
    0000000000000000
    33 Ga.
    0.113"
    2 5/8"1.27"Round
    0.113"Standard
    0000000000000000
    32 Ga.
    0.116"
    2 3/4"1.39"Round
    0.116"Standard
    0000000000000000
    31 Ga.
    0.12"
    2 3/4"1.38"Round
    0.12"Standard
    0000000000000000
    30 Ga.
    0.1285"
    2 3/4"1.36"Round
    0.1285"Standard
    0000000000000000
    29 Ga.
    0.136"
    2 7/8"1.47"Round
    0.136"Standard
    0000000000000000
    28 Ga.
    0.1405"
    2 7/8"1.46"Round
    0.1405"Standard
    0000000000000000
    27 Ga.
    0.144"
    3"1.58"Round
    0.144"Standard
    0000000000000000
    26 Ga.
    0.147"
    3"1.58"Round
    0.147"Standard
    0000000000000000
    25 Ga.
    0.1495"
    3"1.57"Round
    0.1495"Standard
    0000000000000000
    24 Ga.
    0.152"
    3 1/8"1.69"Round
    0.152"Standard
    0000000000000000
    23 Ga.
    0.154"
    3 1/8"1.69"Round
    0.154"Standard
    0000000000000000
    22 Ga.
    0.157"
    3 1/8"1.68"Round
    0.157"Standard
    0000000000000000
    21 Ga.
    0.159"
    3 1/4"1.8"Round
    0.159"Standard
    0000000000000000
    20 Ga.
    0.161"
    3 1/4"1.8"Round
    0.161"Standard
    0000000000000000
    19 Ga.
    0.166"
    3 1/4"1.79"Round
    0.166"Standard
    0000000000000000
    18 Ga.
    0.1695"
    3 1/4"1.78"Round
    0.1695"Standard
    0000000000000000
    17 Ga.
    0.173"
    3 3/8"1.84"Round
    0.173"Standard
    0000000000000000
    16 Ga.
    0.177"
    3 3/8"1.83"Round
    0.177"Standard
    0000000000000000
    15 Ga.
    0.18"
    3 3/8"1.82"Round
    0.18"Standard
    0000000000000000
    14 Ga.
    0.182"
    3 3/8"1.82"Round
    0.182"Standard
    0000000000000000
    13 Ga.
    0.185"
    3 1/2"1.94"Round
    0.185"Standard
    0000000000000000
    12 Ga.
    0.189"
    3 1/2"1.93"Round
    0.189"Standard
    00000000000000000
    11 Ga.
    0.191"
    3 1/2"1.93"Round
    0.191"Standard
    00000000000000000
    10 Ga.
    0.1935"
    3 5/8"2.05"Round
    0.1935"Standard
    00000000000000000
    9 Ga.
    0.196"
    3 5/8"2.04"Round
    0.196"Standard
    00000000000000000
    8 Ga.
    0.199"
    3 5/8"2.03"Round
    0.199"Standard
    00000000000000000
    7 Ga.
    0.201"
    3 5/8"2.03"Round
    0.201"Standard
    00000000000000000
    6 Ga.
    0.204"
    3 3/4"2.09"Round
    0.204"Standard
    000000000000000000
    5 Ga.
    0.2055"
    3 3/4"2.08"Round
    0.2055"Standard
    000000000000000000
    4 Ga.
    0.209"
    3 3/4"2.08"Round
    0.209"Standard
    000000000000000000
    3 Ga.
    0.213"
    3 3/4"2.07"Round
    0.213"Standard
    000000000000000000
    2 Ga.
    0.221"
    3 7/8"2.18"Round
    0.221"Standard
    000000000000000000
    1 Ga.
    0.228"
    3 7/8"2.16"Round
    0.228"Standard
    000000000000000000
     
    back to top