M60 Nuts | McMaster-Carr

These Grade 5, Grade C, or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	M60 × 4 mm	90	48	Class 8	DIN 934	1	91423A440	000000

Bearing Nuts

Carbon Steel

Chamfered Face

Carbon Steel

Stepped Face

Often paired with spring lock washers to strengthen their hold, these bearing nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket.

Carbon Steel—Carbon steel bearing nuts are strong and resist wear.

Chamfered Face—Chamfered-face bearing nuts weigh less and produce less heat than stepped-face nuts.

Stepped Face—Use stepped-face bearing nuts with DIN 462 spring lock washers. You can also use them in pairs or with other bearing nuts. For the nut closer to the bearing, position the stepped face towards the bearing. All meet DIN standards for bearing lockout dimensions.

ISO 2982— Some chamfered-face bearing nuts meet ISO 2982 (formerly DIN 981), an international standard for bearing locknut dimensions. Their sizes correspond to SKF KM series. Use them with DIN 5406 spring lock washers.

Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.

	Nuts								Bearing Lock Washers		Sockets
	Thread
	Size	Spacing	OD, mm	Wd., mm	Specs. Met	For Lock Washer Specs. Met		Each		Each		Each
Carbon Steel







				Chamfered Face

				M60 × 2 mm	Extra Fine	80	11	DIN 981, ISO 2982	DIN 5406	3554N24	000000	90391A124	00000	5510N188	0000000




						Stepped Face

						M60 × 1.5 mm	Extra Fine	90	13	DIN 1804	DIN 462	3564N31	00000	———	0	———	0

Bearing Locknuts

Carbon Steel

With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place. They come as one piece, so you can easily clamp them onto your shaft or spindle. But, since they aren’t made entirely of metal, they don’t stand up to heat as well as all-metal locknuts. Slots in their sides mean you can tighten and loosen them with a spanner wrench or spanner socket. Their face is also chamfered to help keep the size and weight of your assembly at a minimum. All meet international standards for bearing locknut dimensions.

Zinc-Plated Carbon Steel—Zinc-plated carbon steel locknuts resist rusting from some moisture, but you shouldn’t use them with salt water or chemicals. They are strong and resist wear, though they don’t stand up to corrosion as well as 303 stainless steel locknuts.

Carbon Steel—All carbon steel locknuts are strong and resist wear, though they don’t stand up to corrosion as well as 303 stainless steel locknuts.

303 Stainless Steel—303 stainless steel locknuts resist corrosion better than carbon steel locknuts but aren’t as strong. They withstand washdowns and chemicals.

Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.

	Locknuts												Sockets
	Thread						Carbon Steel		Zinc-Plated Carbon Steel		303 Stainless Steel
	Size	Spacing	OD, mm	Wd., mm	Insert Max. Temp., ° F	Specs. Met		Each		Each		Each		Each
Chamfered Face



		M60 × 2 mm	Extra Fine	80	13.5	210	—	———	0	3552N48	0000000	———	0	———	0


		M60 × 2 mm	Extra Fine	80	15	160	ISO 2982-2	5197N117	000000	———	0	5197N138	000000	5510N161	0000000

Spanner Sockets


Socket Shown With Wrench (Sold Separately)

4-Pin

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts. These sockets require less clearance around bearings than standard hook spanner wrenches, so they’re good in tight spaces. Use them with a square-drive wrench handle or a ratchet wrench; they’re not for use with impact wrenches.

							Clearance Dp., mm
	Drive Size, mm	Overall Lg., mm	OD, mm	For Nut Thread Size	For Bearing Nut Specs. Met	For Nut Dia., mm	Nut	Bolt	Material		Each
4-Pin Socket







				1/2" Square Drive

				80	102	96	M60	ISO 2982-2	80	—	65	Steel	5510N161	0000000




						3/4" Square Drive

						80	90	88.5	M60	DIN 981, ISO 2982	80	15	62	Steel	5510N188	000000

Thread Adapters for Drum Openings


Polypropylene M60 Threads	Stainless Steel M56, M60, M64, M70, and BSPP

Convert drum openings with metric or BSPP threads to a 2 NPT pipe size.

	Inlet		Outlet
	Pipe/Thread Size	Gender	Pipe Size	Gender	Seal Material	Max. Temp., ° F		Each
Polypropylene



		M60 Metric	Male	2 NPT	Female	EPDM	125	2045T12	000000


		316 Stainless Steel



				M60 Metric	Male	2 NPT	Female	—	250	2045T22	000000

Thin-Profile Bearing Nuts

Used in pairs or with another bearing nut, these thin-profile nuts—often called shaft nuts—hold bearings, bushings, pulleys, and gears in place on your threaded shaft or spindle. Threading two nuts tightly against each other makes it harder for vibration to loosen your assembly than if you used only one nut. For the nut closer to the bearing, position the stepped face towards the bearing. These thin-profile nuts have holes on the side, so you can tighten and loosen them with a pin spanner wrench. All meet DIN 1816, an international standard for bearing locknut dimensions.

Carbon Steel—Carbon steel bearing nuts are strong and resist wear.

Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.

	Thread
	Size	Spacing	OD, mm	Wd., mm	Specs. Met		Each
Carbon Steel







				Stepped Face

				M60 × 1.5 mm	Extra Fine	90	13	DIN 1816	3549N32	000000