About Plastic Hammer Faces
More
About Hammers
More
Replaceable-Face Mallets
Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Mallets with two face materials can be used for a wider range of applications than other mallets.
Rubber and plastic faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber and plastic faces. Medium-soft faces have a hardness similar to that of a shoe heel. Hard faces have a hardness similar to that of a bowling ball. Extra-hard faces have a hardness similar to that of a hard hat. White rubber faces are nonmarking.
Brass faces are harder than copper and suitable for striking steel, iron, stone, and other hard surfaces.
Steel faces are the hardest metal faces we offer. Use them to drive chisels, masonry drills, and nails.
Acetal plastic handles are lightweight. Hickory and ash handles resist vibration. Steel handles are stronger than wooden handles but have less vibration resistance.
Textured grips provide slip resistance.
Mallets | Replacement Faces | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Face Hardness Rating (Face Color) | Overall Lg. | Head Material | Handle Replaceable | Each | Each | ||
Ash Handle with Plain Grip | |||||||||
| 1 7/8 lbs. | 2" | Hard (White) | 13 1/2" | Zinc | Replaceable | 0000000 | 000000 | 0000000 | 000000 |
| 6 oz. | 1" | Hard (White) | 11" | Zinc | Replaceable | 0000000 | 00000 | 0000000 | 0000 |
| 11 oz. | 1 1/4" | Hard (White) | 10 1/2" | Zinc | Replaceable | 0000000 | 00000 | 0000000 | 0000 |
| 15 oz. | 1 1/2" | Hard (White) | 13" | Zinc | Replaceable | 0000000 | 00000 | 0000000 | 0000 |
Hickory Handle with Plain Grip | |||||||||
| 2 lbs. | 2" | Hard (White) | 14 1/2" | Steel | Replaceable | 0000000 | 00000 | 0000000 | 0000 |
| 3 3/8 lbs. | __ | Hard (White) | 14 1/4" | Steel | Replaceable | 0000000 | 00000 | 0000000 | 00000 |
Mallets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Face Thread | Replacement Faces | ||||||||||
| Head Wt. | Face Dia. | Face Hardness Rating (Face Color) | Size | Type | Overall Lg. | Head Material | Handle Replaceable | Each | Each | ||
Acetal Plastic Handle with Smooth Grip | |||||||||||
| 2 oz. | 5/8" | Extra Hard (Yellow) | 1/4"-20 | UNC | 8 1/4" | Steel | Nonreplaceable | 0000000 | 000000 | 0000000 | 00000 |
| 4 oz. | 7/8" | Extra Hard (Yellow) | 5/16"-18 | UNC | 9 1/4" | Steel | Nonreplaceable | 0000000 | 00000 | 0000000 | 0000 |
Hickory Handle with Plain Grip | |||||||||||
| 7 oz. | 1" | Extra Hard (Yellow) | 7/16"-14 | UNC | 10 1/4" | Steel | Nonreplaceable | 0000000 | 00000 | 000000 | 0000 |
| 8 oz. | 1 1/4" | Extra Hard (Yellow) | 7/16"-14 | UNC | 12" | Steel | Nonreplaceable | 0000000 | 00000 | 0000000 | 0000 |
| 1 lbs. | 1 1/4" | Extra Hard (Yellow) | 7/16"-14 | UNC | 12" | Steel | Nonreplaceable | 0000000 | 00000 | 0000000 | 0000 |
| 2 lbs. | 1 3/4" | Extra Hard (Yellow) | 1/2"-13 | UNC | 12 3/4" | Steel | Nonreplaceable | 0000000 | 00000 | 0000000 | 0000 |
Mallets | Replacement Faces | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Plastic Face Hardness Rating (Color) | Overall Lg. | Head Material | Handle Replaceable | Each | Each | ||
Steel Handle with Textured Grip | |||||||||
| 15 oz. | 1 1/8" | Hard (White) | 11 1/2" | Steel | Nonreplaceable | 0000000 | 000000 | 0000000 | 00000 |
| 1 3/8 lbs. | 1 3/8" | Hard (White) | 11 1/2" | Steel | Nonreplaceable | 0000000 | 00000 | 0000000 | 0000 |
Mallets
Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Rubber and plastic faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber and plastic faces. Medium-hard faces have a hardness similar to that of a cutting board.
Hickory handles resist vibration.
Yellow Face | ||||||||
|---|---|---|---|---|---|---|---|---|
| Head Wt., oz. | Face Dia. | Face Hardness Rating | Overall Lg. | Grip Style | Handle Replaceable | Each | ||
Hickory Handle | ||||||||
| D | 5 | 1 1/4" | Medium Hard | 10 3/4" | Plain | Nonreplaceable | 000000 | 000000 |
| D | 7 | 1 1/2" | Medium Hard | 10 3/4" | Plain | Nonreplaceable | 000000 | 00000 |
| D | 8 | 1 3/4" | Medium Hard | 10 3/4" | Plain | Nonreplaceable | 000000 | 00000 |
| D | 12 | 1 3/4" | Medium Hard | 13 1/2" | Plain | Nonreplaceable | 000000 | 00000 |
Dead Blow Mallets
The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. All have a textured or ribbed grip for slip resistance.
Mallets with two face materials can be used for a wider range of applications than other mallets.
Plastic faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other plastic faces. Soft faces have a hardness similar to that of a tire tread. Hard faces have a hardness similar to that of a bowling ball.
PVC plastic handles with steel core resist breakage if you miss your mark. Fiberglass handles combine high strength with good vibration resistance.
Plastic Face | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Hardness Rating | Color | Overall Lg. | Head Material | Handle Color | Handle Replaceable | Each | |
PVC Plastic Face | |||||||||
PVC Plastic Handle with Steel Core—Textured Grip | |||||||||
| 8 oz. | 1 5/8" | Soft | Black | 10 3/4" | PVC Plastic | Black | Nonreplaceable | 0000000 | 000000 |
| 1 lbs. | 1 3/4" | Soft | Black | 12" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 1 1/2 lbs. | 1 7/8" | Soft | Black | 13" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 2 lbs. | 2 1/8" | Soft | Black | 13 1/2" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 3 lbs. | 2 7/8" | Soft | Black | 14" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 4 lbs. | 2 5/8" | Soft | Black | 14 3/4" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
Fiberglass Handle—Ribbed Grip | |||||||||
| 2 lbs. | 2" | Hard | Black | 14" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 2 3/4 lbs. | 2 3/8" | Hard | Black | 14 1/4" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
| 3 3/8 lbs. | 2 5/8" | Hard | Black | 15 1/4" | PVC Plastic | Black | Nonreplaceable | 0000000 | 00000 |
Replaceable-Face Dead Blow Sledge Hammers
Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.
Press-fit hammers have nylon plastic faces with a hardness similar to that of a bowling ball.
Hard faces have a hardness similar to that of a bowling ball.
Hard (White) | ||
|---|---|---|
| Face Dia. | Each | |
| 4" | 0000000 | 000000 |
Palm Grip Hammers
No handle means precise control for tapping work into position. These hammers can be used in tight spaces where standard hammers don't have room to swing. The replaceable faces have a hardness similar to that of a hard hat. A hex-shaped body keeps the hammer from rolling when you set it down.
Screw-In Hammer Faces
These faces have screw threads to attach to the head of your hammer or mallet. Replace existing faces or switch to a face with a different hardness.
Rubber and plastic faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Extra-soft faces have a hardness similar to that of a pencil eraser.
Soft faces have a hardness similar to that of a tire tread.
Medium-soft faces have a hardness similar to that of a shoe heel.
Medium faces have a hardness that's suitable for most general purpose applications.
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
Face Thread | |||||
|---|---|---|---|---|---|
| Face Dia. | Size | Type | Face Color | Each | |
Extra Soft | |||||
| 1" | 1/4"-20 | UNC | Gray | 0000000 | 00000 |
| 1 1/2" | 5/16"-18 | UNC | Gray | 0000000 | 00000 |
| 2" | 3/8"-16 | UNC | Gray | 0000000 | 00000 |
Soft | |||||
| 1 1/2" | 5/16"-18 | UNC | Brown | 0000000 | 0000 |
| 2" | 3/8"-16 | UNC | Brown | 0000000 | 00000 |
Medium Soft | |||||
| 1" | 1/4"-20 | UNC | Red | 0000000 | 0000 |
| 1 1/2" | 5/16"-18 | UNC | Red | 0000000 | 0000 |
| 2" | 3/8"-16 | UNC | Red | 0000000 | 00000 |
| 3" | 1/2"-13 | UNC | Red | 0000000 | 00000 |
Medium | |||||
| 1" | 1/4"-20 | UNC | Green | 0000000 | 0000 |
| 1 1/2" | 5/16"-18 | UNC | Green | 0000000 | 0000 |
| 2" | 3/8"-16 | UNC | Green | 0000000 | 00000 |
| 3" | 1/2"-13 | UNC | Green | 0000000 | 00000 |
Medium Hard | |||||
| 1" | 1/4"-20 | UNC | Off-White | 0000000 | 0000 |
| 1 1/2" | 5/16"-18 | UNC | Off-White | 0000000 | 00000 |
| 2" | 3/8"-16 | UNC | Off-White | 0000000 | 00000 |
Hard | |||||
| 1" | 1/4"-20 | UNC | Black | 0000000 | 0000 |
| 1 1/2" | 5/16"-18 | UNC | Black | 0000000 | 00000 |
| 2" | 3/8"-16 | UNC | Black | 0000000 | 00000 |
| 3" | 1/2"-13 | UNC | Black | 0000000 | 00000 |
Extra Hard | |||||
| 1" | 1/4"-20 | UNC | Yellow | 0000000 | 0000 |
| 1 1/2" | 5/16"-18 | UNC | Yellow | 0000000 | 00000 |
| 2" | 3/8"-16 | UNC | Yellow | 0000000 | 00000 |
Hammer Faces
Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.
Clamping-head faces are for use in heads with two pieces that clamp together to hold the face in place. Press-fit faces can be used in clamping heads and pressed into hammer heads that have been drilled out.
Rubber and plastic faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Medium-soft faces have a hardness similar to that of a shoe heel.
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
| Face Dia. | Face Lg. | Face Wd. | Face Hardness Rating | Face Color | Each | |
Round Kraton Plastic | ||||||
|---|---|---|---|---|---|---|
| 1" | __ | __ | Medium Soft | Red | 0000000 | 00000 |
| 1 3/8" | __ | __ | Medium Soft | Red | 0000000 | 0000 |
Round Surlyn Plastic | ||||||
| 1" | __ | __ | Hard | Yellow | 0000000 | 0000 |
| 1 3/8" | __ | __ | Hard | Yellow | 0000000 | 0000 |
Round Nylon Plastic | ||||||
| 1 1/4" | __ | __ | Hard | White | 0000000 | 0000 |
| 1 3/8" | __ | __ | Hard | White | 0000000 | 0000 |
| 4" | __ | __ | Hard | White | 0000000 | 00000 |
Rectangular Polyurethane Rubber | ||||||
| __ | 1 3/16" | 1 9/16" | Medium Hard | Off-White | 0000000 | 0000 |