About Brushes
More
Low-Scratch Wheel Brushes
Use these flexible-bristle brushes to remove light-to-medium rust and stains and small burs from delicate surfaces. The bristles won’t leave behind debris that could cause rust on your workpiece.
Nylon bristles are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Dia. | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Each | |
For Use With Bench and Pedestal Grinders | |||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||
| 1" | 1/4" | 1/4" | 0.006" | 1/4" | Crimped | Flexible | 20,000 | 0000000 | 000000 |
| 2" | 3/8" | 1/2" | 0.006" | 5/8" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
| 2" | 3/8" | 1/2" | 0.010" | 5/8" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
| 3" | 1/2" | 1/2" | 0.006" | 1" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
| 3" | 1/2" | 5/8" | 0.010" | 1" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
| 4" | 1/2" | 1/2" | 0.006" | 1 1/2" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
| 4" | 1/2" | 5/8" | 0.010" | 1 1/2" | Crimped | Flexible | 20,000 | 0000000 | 00000 |
Sanding Wheel Brushes
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With Bench and Pedestal Grinders | ||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||
| 1 1/2" | 1/4" | 1/2" | 1/4" | Crimped | Flexible | 20,000 | Silicon Carbide | 0000000 | 000000 | |
| 2" | 3/8" | 5/8" | 1/2" | Crimped | Flexible | 15,000 | Silicon Carbide | 0000000 | 00000 | |
| 2 1/2" | 3/8" | 5/8" | 3/4" | Crimped | Flexible | 15,000 | Silicon Carbide | 0000000 | 00000 | |
| 3" | 1/2" | 5/8" | 5/8" | Crimped | Flexible | 20,000 | Silicon Carbide | 0000000 | 00000 | |
| 4" | 5/8" | 5/8" | 3/4" | Crimped | Flexible | 12,000 | Silicon Carbide | 0000000 | 00000 | |
| 6" | 7/8" | 2" | 1 1/8" | Crimped | Flexible | 6,000 | Silicon Carbide | 0000000 | 00000 | |
| 8" | 7/8" | 2" | 1 1/2" | Crimped | Flexible | 4,500 | Silicon Carbide | 0000000 | 00000 | |
| 10" | 1" | 2" | 2 1/8" | Crimped | Flexible | 3,600 | Silicon Carbide | 0000000 | 000000 | |
| 12" | 1" | 2" | 2 1/8" | Crimped | Flexible | 3,000 | Silicon Carbide | 0000000 | 000000 | |
Long-Lasting Sanding Wheel Brushes
The abrasive lasts longer than that of standard sanding wheel brushes. The grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Brush | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With Bench and Pedestal Grinders | ||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||
| 6" | 1/2" | 1" | 1 1/4" | Crimped | Flexible | 6,000 | Ceramic | 0000000 | 000000 | |
| 6" | 1" | 2" | 1 1/4" | Crimped | Flexible | 3,600 | Ceramic | 0000000 | 000000 | |
| 8" | 1" | 1 1/4" | 1 1/4" | Crimped | Flexible | 6,000 | Ceramic | 0000000 | 000000 | |
| 8" | 1" | 2" | 1 1/4" | Crimped | Flexible | 3,600 | Ceramic | 0000000 | 000000 | |
| 8" | 1" | 2" | 2 1/4" | Crimped | Flexible | 3,600 | Ceramic | 0000000 | 000000 | |
| 10" | 1" | 2" | 1 1/2" | Crimped | Flexible | 3,600 | Ceramic | 0000000 | 000000 | |
| 10" | 1" | 2" | 3 1/4" | Crimped | Flexible | 3,600 | Ceramic | 0000000 | 000000 | |
| 12" | 1" | 4 1/4" | 1 1/2" | Crimped | Flexible | 1,800 | Ceramic | 120 (For Smooth Finish) | 00000000 | 000000 |
| 12" | 1" | 4 1/4" | 3" | Crimped | Flexible | 1,800 | Ceramic | 0000000 | 000000 | |
Sanding Wheel Brushes with Shank
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The bristles won’t leave behind debris that could cause rust on your workpiece.
For technical drawings and 3-D models, click on a part number.
Brush | Shank | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Dia. | Lg. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With Drills, Grinders for Bits and Burs | |||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||||
| 3/4" | 1/8" | 1/8" | 1 1/2" | 1/4" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 00000 |
| 1" | 1/8" | 1/8" | 1 1/2" | 1/4" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 0000 |
| 1 1/4" | 1/8" | 1/8" | 1 1/2" | 3/8" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 0000 |
| 1 1/2" | 1/8" | 1/8" | 1 1/2" | 1/2" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 0000 |
| 3" | 3/8" | 1/4" | 1" | 5/8" | Crimped | Flexible | 6,000 | Silicon Carbide | 00000000 | 00000 | |
| 4" | 3/8" | 1/4" | 1" | 1" | Crimped | Flexible | 6,000 | Silicon Carbide | 00000000 | 00000 | |
Super-Flexible Sanding Wheel Brushes with Shank
Use on contours and angles or for reaching into cracks and corners. Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The bristles won’t leave behind debris that could cause rust on your workpiece.
Shank is required and sold separately.
Brushes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brush | Bristle | Shanks | |||||||||||
| Dia. | Thick. | For Shank Dia. | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | Each | ||
For Use With Drills, Grinders for Bits and Burs | |||||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||||||
| 9/16" | 1/8" | 3/32" | 0.010" | 1/4" | Crimped | Flexible | 35,000 | Aluminum Oxide | 0000000 | 00000 | 0000000 | 00000 | |
| 3/4" | 1/8" | 3/32" | 0.010" | 1/4" | Crimped | Flexible | 35,000 | Aluminum Oxide | 0000000 | 0000 | 0000000 | 0000 | |
| 1" | 1/8" | 1/8" | 0.030" | 3/8" | Crimped | Flexible | 35,000 | Aluminum Oxide | 0000000 | 0000 | 0000000 | 0000 | |
| 2" | 1/8" | 1/4" | 0.030" | 3/8" | Crimped | Flexible | 30,000 | Aluminum Oxide | 0000000 | 0000 | 0000000 | 00000 | |
| 3" | 1/8" | 1/4" | 0.030" | 7/8" | Crimped | Flexible | 20,000 | Aluminum Oxide | 0000000 | 0000 | 0000000 | 00000 | |
Quick-Change Wheel Brushes
A special fastener on the back of these brushes allows you to easily swap one brush for another. Use to remove light-to-medium rust and stains and small burs. The bristles won’t leave behind debris that could cause rust on your workpiece.
Brushes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brush | Quick-Change Fastener | Bristle | Backup Pads | ||||||||||||
| Dia. | Thick. | Manufacturer Equivalent Model | Style | Material | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | Each | ||
For Use With Drills, Grinders for Bits and Burs | |||||||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||||||||
| 3" | 1/8" | Norton Speed-Lok TR, 3M Roloc | B | Plastic | 0.070" | 1" | Straight | Flexible | 25,000 | Aluminum Oxide | 0000000 | 000000 | 00000000 | 000000 | |
Cup Sanding Brushes with Shank for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Shank | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Dia. | Lg. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With Drills, Grinders for Bits and Burs | ||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper | ||||||||||
| 2 3/4" | 1/4" | 7/8" | 1 1/4" | Crimped | Flexible | 6,000 | Silicon Carbide | 00000000 | 000000 | |
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||
| 9/16" | 1/8" | 1 1/2" | 3/8" | Crimped | Flexible | 6,000 | Aluminum Oxide | 600 (For Polished Finish) | 00000000 | 0000 |
| 2" | 1/4" | 1 1/8" | 7/8" | Crimped | Flexible | 5,000 | Silicon Carbide | 00000000 | 00000 | |
| 3" | 1/4" | 1 1/8" | 7/8" | Crimped | Flexible | 5,000 | Silicon Carbide | 180 (For Smooth Finish) | 00000000 | 00000 |
Disc Sanding Brushes with Shank for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Shank | Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Dia. | Lg. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use With CNC Machines, Milling Machines | ||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||
| 1 1/2" | 1/4" | 7/8" | 1 3/8" | Crimped | Flexible | 4,500 | Ceramic | 0000000 | 000000 | |
| 2" | 1/4" | 7/8" | 1 3/8" | Crimped | Flexible | 4,500 | Ceramic | 0000000 | 000000 | |
| 2 1/2" | 1/4" | 7/8" | 1 3/8" | Crimped | Flexible | 4,500 | Ceramic | 0000000 | 000000 | |
Disc Sanding Brushes for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
Brushes for CNC machines require an arbor (sold separately).
Unthreaded brushes for angle grinders require a backup pad and 5/8"-11 disc nut (sold separately).
Brushes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bristle | Backup Pads | Disc Nuts | |||||||||||||
| Brush Dia. | Arbor Hole | Arbor Hole Thread Size | Arbor Hole Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | Each | Each | |||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||||||||
| 4 1/2" | Threaded | 5/8"-11 | __ | 3/4" | Crimped | Flexible | 12,000 | Aluminum Oxide | 000000 | 000000 | 000000 | 00 | 000000 | 00 | |
| 5" | Unthreaded | __ | 7/8" | 3/4" | Crimped | __ | 3,000 | Silicon Carbide | 00000000 | 00000 | 00000000 | 000000 | 0000000 | 00000 | |
| 7" | Unthreaded | __ | 7/8" | 3/4" | Crimped | __ | 2,500 | Silicon Carbide | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 0000 | |
Brushes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bristle | Arbors | |||||||||||
| Brush Dia. | Arbor Hole | Arbor Hole Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | Each | ||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||||
| 4" | Unthreaded | 7/8" | 1 1/2" | Crimped | Flexible | 2,500 | Ceramic | 0000000 | 0000000 | 0000000 | 0000000 | |
| 5" | Unthreaded | 7/8" | 1 1/2" | Crimped | Flexible | 1,750 | Ceramic | 0000000 | 000000 | 0000000 | 000000 | |
| 6" | Unthreaded | 7/8" | 1 1/2" | Crimped | Flexible | 1,750 | Ceramic | 0000000 | 000000 | 0000000 | 000000 | |
| 8" | Unthreaded | 7/8" | 1 1/2" | Crimped | Flexible | 1,200 | Ceramic | 0000000 | 000000 | 0000000 | 000000 | |
| 10" | Unthreaded | 7/8" | 1 1/2" | Crimped | Flexible | 800 | Ceramic | 0000000 | 000000 | 0000000 | 000000 | |
| Replacement Bolt and Washer Kit for Arbor | 0000000 | Each | 000000 |
Cup Sanding Brushes for Flat Surfaces
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step. The nylon bristles won’t leave behind debris that could cause rust on your workpiece and are recommended for use around acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Bristle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Brush Dia. | Arbor Hole Thread Size | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | |||||||||
| 4" | 5/8"-11 | 1 1/2" | Crimped | Flexible | 6,000 | Silicon Carbide | 0000000 | 000000 | |
| 6" | 5/8"-11 | 1 1/2" | Crimped | Flexible | 6,000 | Silicon Carbide | 0000000 | 000000 | |
Quick-Change Brushes
A special fastener on the back of these flexible-bristle brushes allows you to easily swap one brush for another. Use to remove light-to-medium rust and stains and small burs. The bristles won’t leave behind debris that could cause rust on your workpiece.
Brushes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Quick-Change Fastener | Bristle | Backup Pads | ||||||||||||
| Brush Dia. | Manufacturer Equivalent Model | Style | Material | Dia. | Lg. | Style | Flexibility | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | Each | ||
For Use With Drills, Grinders for Bits and Burs | ||||||||||||||
Nylon Plastic Bristles—For Use On Steel, Stainless Steel, Titanium, Brass, Bronze, Copper, Plastic | ||||||||||||||
| 1" | Norton Speed-Lok TR, 3M Roloc | B | Plastic | 0.050" | 5/8" | Straight | Flexible | 30,000 | Aluminum Oxide | 000000 | 00000 | 00000000 | 000000 | |
| 2" | Norton Speed-Lok TR, 3M Roloc | B | Plastic | 0.050" | 5/8" | Straight | Flexible | 25,000 | Aluminum Oxide | 000000 | 00000 | 00000000 | 00000 | |
| 3" | Norton Speed-Lok TR, 3M Roloc | B | Plastic | 0.050" | 5/8" | Straight | Flexible | 15,000 | Aluminum Oxide | 000000 | 00000 | 00000000 | 00000 | |