We will reply to your message within an hour.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.
This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.
With glass reinforcement, this nylon 6/6 material is stronger than standard nylon, plus it can withstand higher temperatures. It’s widely used in high-stress applications, such as caster wheels and automotive parts.
Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.
Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.
Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.
Packs include one 2” square of ABS, Delrin® acetal, LDPE, HDPE, UHMW, nylon, cast nylon, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.
These plastic washers are good electrical insulators.
Choose these washers for their adherence to strict military standards for material and construction.
These washers are excellent electrical insulators.
Also known as shoulder washers.
As you tighten your screw, the rolled collar compresses under the head to create an insulating barrier between a screw shank and a mating surface.
These washers have a flat bottom and high walls to protect metal screw heads from electrical current.
Specially shaped tabs grip your screw shank tightly.
Plastic washers are good electrical insulators.
Made of durable material, these washers resist wear from rubbing and scraping surfaces.
Protect countersunk holes from damage and wear.
Made from nylon 6/6, these threaded rods resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.
These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.
Also known as shoulder and insulator washers, these nonmetal washers block electrical current and prevent corrosion from mating different types of metal.
Cut this stock to length to create the machine key you need. Straight keys, with a square or rectangular cross section, are the most common type of key. Install in a keyway to transmit torque from shafts to gears and other components.
Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears and washers.
Build parts and prototypes from these filaments using Dremel fused filament fabrication (FFF) 3D printers.
Produce intricate parts with these plastic powders—they don’t require support materials and have more uniform mechanical properties than filaments and resins.
With a low coefficient of friction, these pellets won't wear away from abrasion that’s often caused by contact with moving parts. Melt and mold them into desired shapes.
A good alternative to metal wool, nylon is waterproof and won’t rust, splinter, or shed.
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
Safely power seat controls, horns, and other vehicle parts with compressed air.
This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.
To protect sensitive equipment, this tubing is made of nylon that’s specially formulated to let currents pass through, preventing static electricity buildup.
Hard walls give this tubing the strength to handle high-pressure fuel and gasoline applications.
This wear-resistant nylon mesh has openings that meet an exact size tolerance, providing accurate, consistent results in filtering and sifting applications.
Made from a blend of aramid fiber and Buna-N rubber.
Stronger and able to withstand higher pressures than other types of aramid/Buna-N.
Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.
Each assortment includes a variety of materials to meet your gasketing needs.
In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.
Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.
Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.
These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.
Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.
Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.
Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.
Also resist aliphatic hydrocarbons, such as ethylene.
Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.
Made of aluminized fabric, these gloves reflect radiant heat and protect against sparks.
Use these sleeves alone or with gloves to protect your arms from heat.
These hip-length jackets are made of a durable modacrylic/aramid blend. They have a flap in the front that conceals the zipper.
Protect against electric arc flashes with these fire-resistant coveralls.
These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.
Protect your head and neck from extreme heat.
Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.
With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.
This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.
As a strong, lightweight, and buoyant alternative to solid panels, these aramid honeycomb cores are used to make interior wall panels and floor boards in marine, structural, and industrial applications.
With an aramid honeycomb core sandwiched between carbon fiber or fiberglass for rigidity, these panels are strong, but lightweight, and won’t conduct heat. Often used as wall panels in structural and insulating applications, they’re a lightweight alternative to solid composite and aluminum honeycomb panels.
Kevlar is a super-tough material that stands up to wear and abrasion.
Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.
Mix these additives with melted plastic, epoxies, or adhesives to make parts stronger and more wear resistant without adding much weight.
Also known as fishing line, this line is very thin, yet strong and wear resistant.
Often used in temperatures up to 500° F without burning or melting. This webbing is also soft to the touch.
This Nomex aramid felt withstands temperatures three times as high as wool felt. It is chemical resistant and often used as insulation.
Use where high loads and speeds are not required.
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Also known as Oilite® bearings.
An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.
Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.
Don’t wait for grease to travel through a new service line—install this grease-filled tubing between the pump and a lubrication point to begin lubricating immediately.