About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
High-Speed Piston Seals
PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent  | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Specifications Met | Each | |
Glass-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||||
| 1/2" | 0.240" | 0.083" | 010 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 00000 |
| 3/4" | 0.490" | 0.083" | 014 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 7/8" | 0.615" | 0.083" | 016 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1" | 0.740" | 0.083" | 018 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 1/4" | 0.990" | 0.083" | 022 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 1/2" | 1.241" | 0.083" | 025 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2" | 1.604" | 0.129" | 129 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/4" | 1.858" | 0.129" | 133 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/2" | 2.108" | 0.129" | 137 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3" | 2.608" | 0.129" | 145 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/4" | 2.858" | 0.129" | 149 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/2" | 3.108" | 0.129" | 151 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 4" | 3.608" | 0.129" | 153 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
High-Stability High-Speed Piston Seals
A square O-ring prevents these piston seals from rocking in the groove. They have a slippery PTFE surface that allows rod speeds more than two times faster than our other piston seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Specifications Met | Each | |
Glass-Filled PTFE Plastic with Buna-N Rubber O-RIng | |||||||||||||
| 1" | 0.692" | 0.129" | 115 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 00000 |
| 1 1/4" | 0.942" | 0.129" | 119 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 1/2" | 1.192" | 0.129" | 123 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 1 3/4" | 1.443" | 0.129" | 127 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2" | 1.693" | 0.129" | 131 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/4" | 1.943" | 0.129" | 135 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 2 1/2" | 2.193" | 0.129" | 139 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3" | 2.445" | 0.284" | 333 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/4" | 2.695" | 0.284" | 335 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 3 1/2" | 2.945" | 0.284" | 337 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
| 4" | 3.445" | 0.284" | 341 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
High-Pressure Piston Seals
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals. They have two high-strength backup rings that protect against extrusion.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
Glass-Filled PTFE Plastic with Nylon Plastic Backup Ring and Buna-N Rubber O-Ring | ||||||||||||
| 2" | 1.625" | 0.424" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 000000 |
| 2 1/2" | 2.125" | 0.424" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3" | 2.520" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3 1/2" | 3.020" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 4" | 3.520" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
High-Speed Rod Seals
The slippery PTFE surface of these seals allows rod motion up to seven times faster than our other rod seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
Bronze-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
| 3/4" | 1.171" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 000000 |
| 1" | 1.421" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 1 1/4" | 1.671" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 1 3/8" | 1.796" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 1 1/2" | 1.921" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 1 3/4" | 2.171" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 1 7/8" | 2.296" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 2" | 2.421" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 2 1/8" | 2.546" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 000000 | 00000 |
| 2 1/4" | 2.671" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 2.921" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
High-Speed Hydraulic Cylinder Buffering Seals
PTFE gives these seals a slippery surface that facilitates rod speeds over seven times faster than our other buffering seals. Use them in tandem with rod seals to protect the cylinder from pressure spikes and shock.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
Bronze-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
| 5/8" | 0.912" | 0.126" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1" | 1.287" | 0.126" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 1 1/4" | 1.537" | 0.126" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 1 1/4" | 1.671" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 1 1/2" | 1.787" | 0.126" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 1 3/4" | 2.171" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 2" | 2.421" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 2" | 2.594" | 0.248" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 2.921" | 0.165" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 0000 |
| 2 1/2" | 3.094" | 0.248" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3" | 3.594" | 0.248" | 12 | 5,000 | -30° to 230° | Durometer 60D (Extra Hard) | Brown | Durometer 70A (Hard) | Black | 0000000 | 00000 |
High-Speed Rod Wipers
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
MDS-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
| 5/8" | 0.893" | 0.685" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 000000 |
| 1" | 1.268" | 1.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/8" | 1.564" | 1.435" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/4" | 2.018" | 1.810" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2" | 2.268" | 2.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/4" | 2.518" | 2.310" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 2.768" | 2.560" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
High-Speed Wear Rings
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Gap size is the maximum distance between the split ends of the ring while it is in use. Rings are closed when not in use.
For technical drawings and 3-D models, click on a part number.
For Rod Sealing | For Piston Sealing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | For Groove Dia. | For Bore Dia. | For Groove Dia. | Gap Size | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Mineral Fiber-Filled PTFE Plastic | ||||||||||
For 0.26" Groove Wd. | ||||||||||
| 1/4" | 0.500" | 1/2" | 0.250" | 0.017" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 000000 |
| 3/8" | 0.625" | 5/8" | 0.375" | 0.021" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1/2" | 0.750" | 3/4" | 0.500" | 0.024" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 5/8" | 0.875" | 7/8" | 0.625" | 0.027" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 3/4" | 1.000" | 1" | 0.750" | 0.032" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 7/8" | 1.125" | 1 1/8" | 0.875" | 0.036" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1" | 1.250" | 1 1/4" | 1.000" | 0.039" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/8" | 1.375" | 1 3/8" | 1.125" | 0.042" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.046" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
For 0.385" Groove Wd. | ||||||||||
| 7/8" | 1.125" | 1 1/8" | 0.875" | 0.036" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1" | 1.250" | 1 1/4" | 1.000" | 0.039" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/8" | 1.375" | 1 3/8" | 1.125" | 0.042" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.046" | 10.8 | -70° to 300° | Durometer 60D (Extra Hard) | Gray | 0000000 | 00000 |
High-Speed Rotary Shaft Seals
A slippery PTFE surface allows these seals to function at speeds at least 25% faster than other rotary shaft seals. Also known as oil seals, use these to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes. An O-ring secures the lips to prevent leaks, while sealing against the housing. Press-fit seals into the bore around the shaft.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Bore | O-Ring | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Dia. | Min. Wd. | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
Graphite-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
| 3/4" | 1.250" | 0.323" | 25,500 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 000000 |
| 7/8" | 1.375" | 0.323" | 21,800 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1" | 1.500" | 0.323" | 19,100 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 1/8" | 1.625" | 0.323" | 17,000 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 1/4" | 1.750" | 0.323" | 15,300 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/8" | 1.875" | 0.323" | 13,900 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 1/2" | 2.000" | 0.323" | 12,700 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 5/8" | 2.125" | 0.323" | 11,800 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 3/4" | 2.250" | 0.323" | 10,900 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 1 7/8" | 2.375" | 0.323" | 10,200 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2" | 2.500" | 0.323" | 9,500 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/8" | 2.625" | 0.323" | 9,000 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/4" | 2.750" | 0.323" | 8,500 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 3/8" | 2.875" | 0.323" | 8,000 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 1/2" | 3.000" | 0.323" | 7,600 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 5/8" | 3.125" | 0.323" | 7,300 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 3/4" | 3.250" | 0.323" | 6,900 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 2 7/8" | 3.375" | 0.323" | 6,600 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3" | 3.500" | 0.323" | 6,400 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3 1/4" | 3.750" | 0.323" | 5,900 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3 1/2" | 4.000" | 0.323" | 5,500 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 3 3/4" | 4.250" | 0.323" | 5,100 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |
| 4" | 4.500" | 0.323" | 4,800 | 150 | -40° to 250° | Durometer 60D (Extra Hard) | Black | Durometer 70A (Hard) | Black | 0000000 | 00000 |