These switches use DC input voltage and produce PNP or NPN signal output. They're often used with programmable logic controllers (PLCs).

Sense objects from farther away than with other DC proximity switches that have the same diameter.

The flexible cable on these switches withstands applications that require frequent motion, such as robotics.

Easily mount these flat switches to a base or rail.

The short body on these switches makes them suitable for tight spaces.

Mount these intrinsically safe switches to flat surfaces in volatile areas. Their low-current, low-voltage NAMUR signal means they won’t ignite or create sparks while in use. ATEX and IECEx certified, they meet international standards to protect against explosion where combustible dust and flammable gases are present.

Use these switches to sense metallic objects in environments containing flammable gases and combustible dust. ATEX and IECEx certified to protect against explosion, they produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Often used with programmable logic controllers (PLCs), these switches use DC input voltage and produce PNP or NPN signal output.

These switches use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or produce sparks. ATEX certified, they protect against explosion in environments containing flammable gases and combustible dust. Switches sense both metallic and nonmetallic objects.

Mount proximity switches into a panel cutout or tank wall.

With a narrow, flat body, these switches fit in tight spaces.

These switches have a receiver built into the housing, eliminating the need to align components and measure sensing distance during installation.

Safely detect the presence or absence of an object moving at high speeds with a light beam. These switches produce a low-current, low-voltage NAMUR signal, so they won’t create sparks or ignite. ATEX and IECEx certified, they protect against explosion in environments containing flammable gases and combustible dust.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.

The highly flexible fiber-optic cable and small sensing end help you position these switches in hard to reach areas.

These switches sense when a valve is open or closed, supporting flow and temperature control within your system and offering reliable feedback.

With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction.

To provide more mounting flexibility than other sensor and switch mounting brackets, the head rotates 360°.

The spring-loaded design absorbs impact to protect sensors and switches from damage.

This switch mounts to the outside of your tank and detects chemical level through plastic tank walls by measuring the capacitance between the switch and tank contents; it cannot be used with metal tanks.

Measure the level of conductive liquids without drilling a hole in your tank—these switches mount to the outside of the tank and track the capacitance between them and the tank’s contents.

Position your sensor exactly where you need it for your conveyor setup.