McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    111 Products
    About Plastic
    industrial info icon

    Compare over 25 types of plastic to find the right material for you.

    Oil-Filled Cast Nylon Sheets

    Image of Product. Front orientation. Plastic. Oil-Filled Cast Nylon Sheets.
    Fabricate gears, sprockets, and wear strips for use in hard-to-reach areas where adding lubricants would be difficult. These sheets are impregnated with an oil lubricant, so they stay slippery over time. Because they are made of cast nylon 6, they are easier to machine than standard nylon sheets, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
    Green
    Wd.
    Lg.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Each
    1/4" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K111000000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K6600000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K6700000
     
    3/8" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K11200000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K7600000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K77000000
     
    1/2" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K12100000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K1700000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K39000000
     
    3/4" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K12200000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K1800000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K48000000
     
    1" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K12300000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K19000000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K49000000
     
    1 1/2" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K12400000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K28000000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K58000000
     
    2" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K12500000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K29000000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K59000000
     
    3" Thick (0" to 0.025" Tolerance)
    6"6"Cast322309,500 to 10,0001.2 to 1.484845K126000000
    12"12"Cast322309,500 to 10,0001.2 to 1.484845K38000000
    12"24"Cast322309,500 to 10,0001.2 to 1.484845K81000000
     

    Oil-Filled Cast Nylon Rods

    Image of Product. Front orientation. Plastic. Oil-Filled Cast Nylon Rods.
    These rods remain slippery over time because they’re impregnated with an oil lubricant. Use them to fabricate pulleys, screws, bushings, and bearings for use in hard-to-reach places where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
    1 ft. Long
    2 ft. Long
    Dia.
    Fabrication
    Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Each
    Each
    Green
    1"Cast32 to 2309,500 to 10,0001.2 to 1.48664K110000008664K51000000
    1 1/4"Cast32 to 2309,500 to 10,0001.2 to 1.48664K12000008664K5200000
    1 1/2"Cast32 to 2309,500 to 10,0001.2 to 1.48664K13000008664K5300000
    1 3/4"Cast32 to 2309,500 to 10,0001.2 to 1.48664K14000008664K5400000
    2"Cast32 to 2309,500 to 10,0001.2 to 1.48664K15000008664K5500000
    3"Cast32 to 2309,500 to 10,0001.2 to 1.48664K71000008664K81000000
    4"Cast32 to 2309,500 to 10,0001.2 to 1.48664K720000008664K82000000
    5"Cast32 to 2309,500 to 10,0001.2 to 1.48664K730000008664K83000000
    6"Cast32 to 2309,500 to 10,0001.2 to 1.48664K740000008664K84000000
    8"Cast32 to 2309,500 to 10,0001.2 to 1.48664K750000008664K85000000
     

    Oil-Filled Cast Nylon Bars

    Image of Product. Front orientation. Plastic. Oil-Filled Cast Nylon Bars.
    Fabricate gears, sprockets, and wear strips for use in hard-to-reach areas where adding lubricants would be difficult. These bars are impregnated with an oil lubricant, so they stay slippery over time. Because they are made of cast nylon 6, they are easier to machine than standard nylon sheets, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
    Wd.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Color
    Choose a Length, ft.
    Per
    Ft.
    1/4" Thick (0" to 0.025" Tolerance)
    1"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K5100000
    1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K5200000
    2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K5300000
     
    1/2" Thick (0" to 0.025" Tolerance)
    1"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K6100000
    1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K6200000
    2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K6300000
     
    3/4" Thick (0" to 0.025" Tolerance)
    1"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K7100000
    1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K7200000
    2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K7300000
     
    1" Thick (0" to 0.025" Tolerance)
    1"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K8100000
    1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K8200000
    2"Cast322309,500 to 10,0001.2 to 1.4Green1, 2, 3, 42858K8300000
     

    Oil-Filled Cast Nylon Round Tubes

    Image of Product. Front orientation. Plastic. Oil-Filled Cast Nylon Round Tubes.
    Impregnated with oil, these tubes remain slippery over time. Use them to fabricate pulleys, bushings, and bearings for use in hard-to-reach areas where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. This material is comparable to Nycast and Nyloil.
    Oversized Tolerance—Oversized tubes have an oversized OD and an undersized ID for finishing to the sizes listed.
    OD
    ID
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Color
    Choose a Length,
    ft.
    Per
    Ft.
    Oversized Tolerance
     
    1/4" Thick Wall
    2"1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K424000000
     
    1/2" Thick Wall
    2"1"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K41400000
    2 1/4"1 1/4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K44400000
    2 1/2"1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K46400000
    2 3/4"1 3/4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K48400000
    3"2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K52400000
    3 1/4"2 1/4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K55400000
    3 1/2"2 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K58400000
    4"3"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K61400000
    4 1/2"3 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K64400000
    5"4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K67400000
    5 1/2"4 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K714000000
     
    5/8" Thick Wall
    2 1/4"1"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K43400000
    2 3/4"1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K47400000
    3 1/4"2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K54400000
     
    3/4" Thick Wall
    2 1/2"1"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K45400000
    3"1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K51400000
    3 1/2"2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K57400000
    4 1/2"3"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K63400000
    5"3 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K664000000
    5 1/2"4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K694000000
     
    1" Thick Wall
    3"1"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K49400000
    3 1/4"1 1/4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K53400000
    3 1/2"1 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K56400000
    4"2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K59400000
    4 1/2"2 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K62400000
    5"3"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K654000000
    5 1/2"3 1/2"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K684000000
    6"4"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K734000000
     
    1 1/2" Thick Wall
    6"3"Cast322309,500 to 10,0001.2 to 1.4Green1, 284755K724000000
     

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Oil-Filled Nylon—Oil can’t seep out because it is locked inside the nylon. The oil resists moisture, making these the only nylon bearings suitable for wet and humid areas. Similar to MDS-filled nylon, they are slicker than standard nylon with the same great wear resistance.
    Each
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    Oil-Filled Nylon
    3/8"1/2"3/8"35 lb. @ 120 rpmWhite-20 to 2107662N11000000000000000000
    3/8"1/2"1/2"47 lb. @ 120 rpmWhite-20 to 2107662N12000000000000000
    3/8"1/2"1"95 lb. @ 120 rpmWhite-20 to 2107662N13000000000000000
    1/2"5/8"1/2"47 lb. @ 120 rpmWhite-20 to 2107662N14000000000000000
    1/2"5/8"3/4"70 lb. @ 120 rpmWhite-20 to 2107662N15000000000000000
    1/2"5/8"1"95 lb. @ 120 rpmWhite-20 to 2107662N16000000000000000
    5/8"3/4"3/4"140 lb. @ 60 rpmWhite-20 to 2107662N17000000000000000
    3/4"7/8"1/2"95 lb. @ 60 rpmWhite-20 to 2107662N18000000000000000
    1"1 1/8"1"190 lb. @ 60 rpmWhite-20 to 2107662N19000000000000000
     

    Dry-Running Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Dry-Running Flanged Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Oil-Filled Nylon—Oil can’t seep out because it is locked inside the nylon. The oil resists moisture, making these the only nylon bearings suitable for wet and humid areas. Similar to MDS-filled nylon, they are slicker than standard nylon with the same great wear resistance.
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Flange
    OD
    Flange
    Thk.
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    Each
    Oil-Filled Nylon
    1/4"5/16"1/4"1/2"1/32"23 lb. @ 120 rpm28 lb. @ 120 rpmWhite-20 to 2107719N10100000
    1/4"3/8"3/8"1/2"1/16"35 lb. @ 120 rpm28 lb. @ 120 rpmWhite-20 to 2107719N1020000
    1/4"3/8"1/2"1/2"1/16"47 lb. @ 120 rpm28 lb. @ 120 rpmWhite-20 to 2107719N1030000
    3/8"1/2"1/4"11/16"1/16"23 lb. @ 120 rpm36 lb. @ 120 rpmWhite-20 to 2107719N1040000
    3/8"1/2"3/8"5/8"1/16"35 lb. @ 120 rpm30 lb. @ 120 rpmWhite-20 to 2107719N1050000
    3/8"1/2"1/2"5/8"1/16"47 lb. @ 120 rpm30 lb. @ 120 rpmWhite-20 to 2107719N1060000
    3/8"1/2"1/2"11/16"1/16"47 lb. @ 120 rpm36 lb. @ 120 rpmWhite-20 to 2107719N1070000
    3/8"1/2"3/4"11/16"1/16"70 lb. @ 120 rpm36 lb. @ 120 rpmWhite-20 to 2107719N1080000
    1/2"5/8"1/4"7/8"1/16"23 lb. @ 120 rpm44 lb. @ 120 rpmWhite-20 to 2107719N1090000
    1/2"5/8"3/8"7/8"1/8"35 lb. @ 120 rpm44 lb. @ 120 rpmWhite-20 to 2107719N1110000
    1/2"5/8"1/2"7/8"1/8"47 lb. @ 120 rpm44 lb. @ 120 rpmWhite-20 to 2107719N1120000
    1/2"3/4"1/2"1"1/8"47 lb. @ 120 rpm55 lb. @ 120 rpmWhite-20 to 2107719N1130000
    3/4"7/8"1/2"1 1/8"1/8"95 lb. @ 60 rpm90 lb. @ 60 rpmWhite-20 to 2107719N11400000
    3/4"7/8"3/4"1 1/8"1/8"140 lb. @ 60 rpm90 lb. @ 60 rpmWhite-20 to 2107719N11500000
    3/4"1"3/4"1 1/4"5/32"140 lb. @ 60 rpm120 lb. @ 60 rpmWhite-20 to 2107719N11600000
    3/4"1"1"1 1/4"1/8"190 lb. @ 60 rpm120 lb. @ 60 rpmWhite-20 to 2107719N11700000
     
    back to top