Dispense a fixed amount of oil by pumping the handle. To control flow to multiple lubrication points, use metering valves (sold separately).

Vertical pump dispenses oil when you pull the handle. Horizontal pumps dispense oil when you release the handle.

Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

Connect these modular pumps to your air system and add a reservoir and solenoid valve to automate the flow of oil. Install or remove pumps as your lubrication needs change. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw.

Pumps with spray nozzle provide a broader dispensing pattern. Nozzle bends and stays in position.

Note: For proper operation, pumps require a three-way solenoid valve (sold separately). The solenoid can be controlled by a timer or PLC (programmable logic controller).

Ready to connect to your air system, these complete systems include a timer and a reservoir. Turn the dials to set the cycle interval. Each pump has a separate flow adjustment; use a screwdriver to turn the flow-adjustment screw. Pumps and their components come mounted on a panel.

Use these valves with manual and electric pumps to dispense different amounts of oil from multiple lubrication points. They have a check valve to prevent backward flow. To connect to tubing, use a compression nut and sleeve (sold separately).

Flow rate trade number indicates the relative amount of oil each valve delivers. For each increase in trade size, the amount of oil delivered approximately doubles. For example, 0 delivers twice the amount of oil that 00 delivers. In a system with two lubrication points, the lubrication point connected to 0 will receive 2/3 of the oil dispensed, and the lubrication point connected to 00 will receive 1/3 of the oil dispensed. In general, valves with lower relative flow rates are better for cycling systems; valves with higher relative flow rates are better for continuous recirculation systems.

These manual dispensers are more portable than air-powered dispensers.

Style A mounts to a 5-gal. pail of oil (not included).

Equipped with a flowmeter/totalizer, this dispenser displays both flow rate and cumulative flow volume of the oil dispensed. Mount it to your drum of oil. It's smaller and more portable than air-powered container-mount dispensers, making it good for refilling gear boxes and transmissions. The container is not included.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum of oil (not included).

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers. They include one faucet and can fit up to three, so you can access different types of oil at a single centralized point.

Add faucets to oil dispensing stations for increased utility.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets.

Styles A and C do not include a container. Use them with your pail of grease.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers. Use it with your pail of grease. Container not included.

Dispense from your drum or pail of grease using compressed air. Dispensers include a follower plate that moves down the inside of the container as the grease level drops to compress the grease and prevent vapor pockets. Containers not included.

Dispensers deliver grease at the same pressure as your existing grease system, up to the max. grease outlet pressure. Dispensers with a booster gun allow you to increase the pressure to the value listed for max. grease outlet pressure with booster.

Styles A-D have a Z-swivel that connects the outlet hose to the gun and prevents the hose from kinking.

A display allows you to monitor how much grease is dispensed. Toggle between the resettable batch total and the cumulative total that cannot be reset. The included Z-swivel connects to an outlet hose, so the gun can move in any direction without kinking the hose.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings. Note: Do not use flexible nozzles with these booster guns.

Style B has a Z-swivel connector. This connector can move the gun in any direction without kinking the outlet hose.

Gun with flexible nozzle includes a Z-swivel, which connects to the outlet hose to prevent it from kinking.

Powered by your air system, these dispensers release a precise amount of grease in timed intervals, so your machine will never have too much or too little. They’ll dispense the right amount even if changing temperatures affect the grease consistency. Back pressure doesn’t impact these dispensers either. But compared to motor-driven dispensers, they’re more complicated to set up. Besides your air system, you’ll need to attach a three-port solenoid valve and either a timer or programmable logic controller (PLC) to control the valve (all not included). If you use a PLC, they’ll prevent over-lubrication when your machine is down by only greasing when it’s running. This is useful for machines with intermittent downtime. Even without a PLC, you can manually cut off the flow without uninstalling the dispenser.

They’re modular, so install or remove pumps as your lubrication needs change. Each pump has mounting holes drilled through their body. Use a screwdriver to turn each pump’s flow-adjustment screw.

These dispensers don’t come with grease, so use the grease that’s best for your machine.