Filter by
For Use With
Material
Hydraulic Tank Type
Connection Port
Maximum Temperature
Shape
System of Measurement
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Cover Style
Number of Mounting Holes
Grease Fitting Adapters
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Straight
Adapter
Connection | ||||
|---|---|---|---|---|
| Male | Female | Material | Each | |
Adapters | ||||
| NPT 1/8 | NPT 1/4 | Steel | 00000000 | 000000 |
| NPT 1/4 | NPT 3/8 | Steel | 00000000 | 00000 |
| BSPP 1/8 | NPT 1/8 | Steel | 00000000 | 0000 |
| BSPP 1/4 | NPT 1/8 | Steel | 00000000 | 0000 |
| BSPP 1/4 | NPT 1/4 | Steel | 00000000 | 0000 |
| BSPP 1/4 | BSPP 1/8 | Steel | 00000000 | 00000 |
| BSPP 3/8 | NPT 3/8 | Steel | 00000000 | 0000 |
| Metric M6 × 1 mm | NPT 1/8 | Steel | 00000000 | 00000 |
| Metric M10 × 1 mm | NPT 1/8 | Steel | 00000000 | 0000 |
Hydraulic Tanks
Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.
Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.
Breather vents prevent excess pressure in tanks and allow a free flow of air. To install the breather vent to Style C tanks, drill a hole in the tank.
A
B
C
Replacement Gasket
Replacement Cover
O'all | Drain Connection—NPT | Inlet/Outlet Connection—NPT | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap., gal. | Lg. | Wd. | Ht. | Pipe Size  | Dash Size | No. of Ports | Pipe Size | Dash Size | No. of Ports | Fasteners Included | No. of Holes | Hole Dia. | Max. Temp., °F | Each | |
Steel Tanks | ||||||||||||||||
Single Chamber | ||||||||||||||||
| A | 1 | 6" | 7 1/2" | 12 1/4" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 11/32" | 250° | 0000000 | 0000000 |
| A | 2 | 10" | 7 1/2" | 12 1/4" | 1/2 | 08 | 1 | 1/2 | 08 | 1 | No | 4 | 11/32" | 250° | 0000000 | 000000 |
| B | 2 | 10 1/8" | 10 1/8" | 9 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 3 | 10 1/8" | 10 1/8" | 13 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 5 | 10 1/8" | 10 1/8" | 17 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 8 | 14 1/4" | 12" | 19 1/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 10 | 19" | 14 7/8" | 15 1/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
Dual Chamber | ||||||||||||||||
| A | 5 | 16" | 10" | 14" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 000000 |
| A | 10 | 20" | 12" | 17 1/2" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 000000 |
| C | 20 | 26" | 16" | 15 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 30 | 26" | 16" | 21 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 40 | 38 1/4" | 24" | 14" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| C | 60 | 42 3/8" | 30" | 16 5/8" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 00000000 |
| C | 100 | 50 3/8" | 30" | 19" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 00000000 |
| Replacement Neoprene Rubber Gasket for 62945K42 and 62945K43 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Steel Cover for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 0000 |
| Replacement Steel Cover for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 00000 |
| Replacement Neoprene Rubber Gasket for 62945K14 and 62945K15 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K11, 62945K12, and 62945K13 | 00000000 | Each | 00000 |
Pipe Suction Flanges
Mounting Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Cutout Dia. | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Lg. | Wd. | Includes | Each | |
| 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 000000 |
| 3/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
Flange-Mount Breather Vents
Material | Strainer | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Cap | Strainer | Gasket | Removes Particle Size Down To, microns | Cap Dia. | Flange Dia. | Dia. | Ht. | Mounting Fasteners Included | Lg. | Wd. | Bolt Circle Dia. | Each | |
| 2 1/8" | Zinc-Plated Steel | Plastic | Rubber | 40 | 3" | 3 1/4" | 1 7/8" | 3 13/16" | Yes | 1/4" | 3/16" | 2 7/8" | 00000000 | 000000 |
Level Indicators for Style A Tanks
Through-Wall Mount
Thread | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Gender | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temperature Range | Material | Fitting Material | Window Material | Includes | Each | |
| 1/2"-20 | UNF | Male | 5" | 6 5/8" | 3 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 000000 |
| 1/2"-20 | UNF | Male | 6" | 7 5/8" | 4 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 00000 |
| 1/2"-20 | UNF | Male | 9" | 10 5/8" | 7 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 00000 |
Level and Temperature Indicators for Styles B and C Tanks
Nylon Plastic With Steel Guard
For Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | No. of | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temp. Range | Thermometer Temp. Range | Material | Guard Material | Window Material | Each | |
| 1/2" | 2 | 5" | 6 3/8" | 3 7/8" | 13/16" | 1/2" | 50 psi @ 70° F | -40° F to 210° F | 0° F to 220° F | Nylon Plastic | Steel | Nylon Plastic | 0000000 | 000000 |