McMaster-Carr logo
    Filter by
    For Drum Opening Pipe Size
    Industrial Info Compare
    Discharge Connection Port
    Discharge Pipe Size
    Industrial Info Compare
    Piston Material
    Intake Pipe Size
    Industrial Info Compare
    Discharge Connection
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    128 Products

    Drum Pumps for Oil

    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Oil.
    Use these pumps to move lubricating oil, such as motor oil. Spout is removable and can be replaced with a garden hose.
    Temp.,
    ° F
    Intake
    Discharge (Pump Body)
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    Connection
    Hose
    Size
    Gender
    Thread
    Type
    Spout
    Type
    Drum Pump
    Type
    Each
    1615 to 55316501102 NPTDrum Connector1 1/2"37"Spout End
    Pump Body    		Threaded3/4FemaleGHT
    		RemovablePlunger0000000000000
     

    Adjustable-Flow Easy-Stroke Drum Pumps for Water and Chemicals

    Image of Product. Front orientation. Drum Pumps. Adjustable-Flow Easy-Stroke Drum Pumps for Water and Chemicals, 304 Stainless Steel Housing.

    304 Stainless

    Steel Housing

    These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.
    Whenever working with flammable liquids, always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
    Temp.
    Intake
    Flow Rate, fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.,
    ° F
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube Lg.
    For Discharge
    Tube ID
    Spout
    Type
    Each
    304 Stainless Steel Intake Tube and 304 Stainless Steel Housing
    6, 8, 10, 1215 to 552,000Not Rated1401 1/2 NPT, 2 NPTDrum Connector1 1/8"18 1/2" to 32 1/2"11/16"Removable00000000000000
     

    Drum Pumps for Water and Chemicals

    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style B.
    Image of Product. Style C (Shown with Connector). Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style C.
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style D.
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style E.
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style F.

    Style B

    Style C (Shown

    with Connector)

    Style D

    Style E

    Style F

    Push the plunger to pump water, cleaners, and chemicals.
    Style B
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style B.
    Style B are for thin liquids with a maximum viscosity of 700 or 750 centipoise.
    Drum Pumps
    Replacement
    Connectors
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Each
    Pipe
    Size
    Each
    PVC Piston
    857504012070 mmDrum Connector1/2"13"Tube End7/16"5/8"22"PVC
    		000000000000002 NPT00000000000000
     
    Style C
    Image of Product. Style C (Shown with Connector). Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style C.

    Style C (Shown

    with Connector)

    Style C are rated for liquids up to 2,500 centipoise. They are often used as hand pumps and do not come with a connector. To attach them to a container, select an optional connector.
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    Tube
    OD
    Tube
    Lg.
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Each
    CSM Piston
    55 to 152,500351201/2"18"Tube End7/16"9/16"9"PVC
    		0000000000000
     
    Connectors
    For Drum Opening
    Size
    Connection
    Material
    Each
    —3/4 NPTNylon
    		0000000000000
    —2 NPTPolypropylene
    		000000000000
    33 mm—Polypropylene
    		000000000000
    70 mm—Polyethylene000000000000
    Style D
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style D.
    Style D are rated for liquids up to 2,500 centipoise.
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Each
    CSM Piston
    652,5003512061 mmDrum Connector1/2"14 1/2"Tube End7/16"9/16"36"PVC
    		0000000000000
    652,5003512063 mmDrum Connector1/2"14 1/2"Tube End7/16"9/16"36"PVC
    		000000000000
    652,5003512070 mmDrum Connector1/2"14 1/2"Tube End7/16"9/16"36"PVC
    		000000000000
     
    Style E
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style E.
    Style E are rated for liquids up to 2,500 centipoise.
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Each
    CSM Piston
    85 to 302,500351202 NPTDrum Connector1/2"18"Tube End7/16"9/16"48"PVC
    		0000000000000
     
    Viton® Fluoroelastomer Piston
    55 to 552,500351202 NPTDrum Connector9/16"36"Tube End7/16"9/16"9"PVC
    		000000000000
     
    Style F
    Image of Product. Front orientation. Drum Pumps. Drum Pumps for Water and Chemicals, Style F.
    Style F are rated for liquids up to 2,500 centipoise.
    Drum Pumps
    Connectors
    Replacement
    Connectors
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Each
    Connection
    Each
    Pipe
    Size
    Each
    Viton® Fluoroelastomer Piston
    28552,500351202 NPTDrum Connector1 1/2"38"Tube End1 1/4"1 1/2"36"Polyethylene000000000000002 5/8"-5 Buttress00000000000002 NPT0000000000000
    28552,500351202 NPTDrum Connector1 1/2"38"Tube End1 1/4"1 1/2"72"Polyethylene00000000000002 5/8"-5 Buttress0000000000002 NPT000000000000
    28552,500351202"Drum Connector1 1/2"38"Tube End1 1/4"1 1/2"36"Polyethylene00000000000002 5/8"-5 Buttress0000000000002 NPT000000000000
    28552,500351202"Drum Connector1 1/2"38"Tube End1 1/4"1 1/2"72"Polyethylene000000000000002 5/8"-5 Buttress0000000000002 NPT000000000000
     

    Fixed-Flow-Rate Peristaltic Pumps for Chemicals

    Image of Product. Front orientation. Peristaltic Pumps. Fixed-Flow-Rate Peristaltic Pumps for Chemicals.
    Also known as tubing pumps, these maintain a fixed flow rate. Pumps are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Mount them up to 25 feet above your liquid source. All can run dry. Do not use with solids.
    Viton® Fluoroelastomer Wetted Parts—Pumps with Viton® Fluoroelastomer tubing withstand oil such as gasoline and hydraulic oil.
    Pumps
    Replacement
    Pump Heads
    Overall
    Flow Rate, gal./day
    (For Tube ID)
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp.,
    ° F
    Power
    Current,
    amp
    Lg.
    Wd.
    Ht.
    Includes
    Each
    Each
    115V AC, Single Phase—Plug In
     
    PVDF and Viton® Fluoroelastomer Wetted Parts
    0.02 (1/32")
    0.07 (1/16")
    0.25 (1/8")    		3080032 to 122Fractional0.035 1/2"3 1/4"3 3/4"4 1/2" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/32" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60)0000000000000000000000000000000
    0.11 (1/32")
    0.34 (1/16")
    1.25 (1/8")    		3080032 to 122Fractional0.035 1/2"3 1/4"3 3/4"4 1/2" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/32" ID Viton® Fluoroelastomer Tubing (Shore A60), 4 1/2" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
    0.87 (1/16")
    3.53 (1/8")
    6.84 (3/16")    		3080032 to 122Fractional0.035 1/2"3 1/4"3 3/4"6" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
    1.75 (1/16")
    7.07 (1/8")
    13.68 (3/16")    		3080032 to 122Fractional0.035 1/2"3 1/4"3 3/4"6" Lg. of 1/16" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 1/8" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
    22.8 (3/16")
    38 (1/4")    		1550032 to 122Fractional0.525"5"7"6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
    45.6 (3/16")
    76 (1/4")    		1520032 to 122Fractional0.655"5"7"6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
    228 (3/16")
    380 (1/4")    		155032 to 122Fractional1.745"5"7"6" Lg. of 1/4" ID Viton® Fluoroelastomer Tubing (Shore A60), 6" Lg. of 3/16" ID Viton® Fluoroelastomer Tubing (Shore A60)00000000000000000000000000000
     
    Replacement Pump Intake Tubes
    For Flow Rate,
    gal/day
    Each
    For PVDF and Viton® Fluoroelastomer Wetted Parts Material
    0.02 to 0.11000000000000000
    0.06 to 0.3400000000000000
    0.24 to 1.2500000000000000
    0.87 to 1.7500000000000000
    3.53 to 7.0700000000000000
    6.84 to 13.6800000000000000
    22.8 to 22800000000000000
    38 to 38000000000000000
     

    316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids

    With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    15121071/8"10,000201/4 Female NPT1/2 Female NPT1/2 Female NPT9"10"10"000000000000000000000000000000000000000000000
    453830191/4"20,000401/2 Female NPT1 Female NPT1 Female NPT13"10"13"000000000000000000000000000000000000000000
    1067762451/4"30,000503/4 Female NPT1 1/2 Female NPT1 1/2 Female NPT15"17"22"00000000000000000000000000000000000000000000
    15010476531/4"40,0001003/4 Female NPT2 Female NPT2 Female NPT15"17"26"00000000000000000000000000000000000000000000
    235174127903/8"50,0001403/4 Female NPT3 Female NPT3 Female NPT17"20"32"000000000000000000000000000000000000000000000
     

    Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals

    Image of Product. Front orientation. Drum Pumps. Electric Drum Pump Systems for Water, Oil, Coolants, and Chemicals.
    Including nozzles and connectors, these pumps come with everything you need to start pumping. All include a pump assembly, 1" ID hose, dispensing nozzle, drum connector, and storage bracket.
    316 Stainless Steel Housing—Pumps with a 316 stainless steel housing are often used with fuel, acetone, methyl ethyl ketone (MEK), xylene, and mineral spirits. Their motors are rated IP55 and are CSA certified for use in Class I, Divisions 1 and 2, Group D hazardous environments with flammable gases and vapors.
    Temp.
    Intake
    Discharge
    Flow Rate,
    gpm
    Discharge
    Pressure, psi
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.,
    ° F
    Power,
    hp
    Current,
    amp
    For Drum Opening
    Size
    Tube
    OD
    Tube
    Lg.
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Hazardous Location Rating
    Enclosure
    Rating
    Each
    120V AC—Single Phase—Hardwire
     
    316 Stainless Steel Housing
    1815551,000Not Rated1751 1/39.12 NPT1 1/2"39"1"1 1/4"72"NEC Class I Divisions 1, 2 Group D
    		IP55
    		0000000000000000
     

    Nondrip Drum Pumps for Water and Chemicals

    Image of Product. Front orientation. Drum Pumps. Nondrip Drum Pumps for Water and Chemicals.
    Image of Product. Front orientation. Pump Tap Kits. Nondrip Drum Pumps for Water and Chemicals.

    Tap Kits

    Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow. Pressurize your container with a few pumps of the plunger handle, and use the one-touch nozzle to manage flow. Hold down the nozzle for intermittent dispensing, open the nozzle fully for continuous flow, and close the nozzle to stop flow entirely.
    Tap Kits—Remote tap kits extend your pump's reach for transferring liquid to tanks, mixers, and sprayers.
    Drum Pumps
    Tap Kits
    Temp.,
    ° F
    Intake
    Flow Rate,
    gpm
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    Drum Pump
    Type
    Nozzle
    Type
    Each
    Each
    4.52 to 55270351102 NPTDrum Connector5/8"40"NozzlePlungerNondrip0000000000000000000000000000
     

    Siphon Drum Pumps

    Image of Product. Front orientation. Drum Pumps. Siphon Drum Pumps, Style B.

    Style B

    Since these pumps use suction to draw liquid out of your container, they continue dispensing once you get them started. They're often used with coolant and water.
    5 gpm to 7 gpm Flow Rate—Adjust pumps with a 5-7 gpm flow rate for different dispensing applications.
    Temp.
    Intake
    Discharge
    Style
    Flow Rate,
    gpm
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.,
    ° F
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    Tube
    ID
    Tube
    OD
    Tube
    Lg.
    Tube
    Material
    Drum Pump
    Type
    Each
    B5 to 75650Not Rated1402 NPS, 70 mmDrum Connector1 1/2"16"Tube End1"1 1/4"60"PVC
    		Siphon0000000000000
    B5 to 75 to 6650Not Rated1402 NPSDrum Connector1 1/2"16"Tube End1"1 1/4"60"PVC
    		Siphon000000000000
    B5 to 715650Not Rated1402 NPSDrum Connector1 1/2"24"Tube End1"1 1/4"60"PVC
    		Siphon000000000000
     
    Connectors
    Image of Product. Front orientation. Pump Fittings. Siphon Drum Pumps.
    For Drum Opening
    Size
    Connection
    Each
    2 NPSM56 Buttress0000000000000
    2 NPSM63 Buttress000000000000
    2 NPSM66 Buttress000000000000
    2 NPSM70 Buttress000000000000

    316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids

    With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.
    Threaded Top Intake and Threaded Bottom Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids, Threaded Top Intake and Threaded Bottom Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max.
    Viscosity
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    704735201"Not Rated501/2 Female NPT1 Female NPT1 Female NPT11"17"16"0000000000000000000000000000000000000000000000
     

    Aluminum Air-Powered Double Diaphragm Pumps for Fuel, Oil, and Large Solids

    The fluoroelastomer diaphragm withstands higher temperatures than a neoprene diaphragm and has better resistance to fuel such as gasoline and kerosene. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.
    Threaded Top Intake and Threaded Bottom Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Fuel, Oil, and Large Solids, Threaded Top Intake and Threaded Bottom Discharge, 70 gpm Maximum Flow Rate.
    Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Fuel, Oil, and Large Solids, Threaded Top Intake and Threaded Bottom Discharge, 140 gpm Maximum Flow Rate.

    70 gpm Maximum Flow Rate

    140 gpm Maximum Flow Rate

    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max.
    Viscosity
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    704735201"Not Rated501/2 Female NPT1 Female NPT1 Female NPT11"17"16"0000000000000000000000000000000000000000000000
    14012096772"Not Rated1503/4 Female NPT2 Female NPT2 Female NPT14"22"20"0000000000000000000000000000000000000000000
     

    Aluminum Air-Powered Double Diaphragm Pumps for Oil and Chemicals

    A neoprene diaphragm resists oil and chemicals such as isopropyl alcohol and deionized water. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil and Chemicals, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    15121071/8"10,000201/4 Female NPT1/2 Female NPT1/2 Female NPT9"10"12"000000000000000000000000000000
     

    Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel

    These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    15121071/8"10,000201/4 Female NPT1/2 Female NPT, 1/2 Female NPT1/2 Female NPT, 1/2 Female NPT9"10"12"00000000000000000000000000000000000000000000
    453830191/4"20,000401/2 Female NPT1 Female NPT1 Female NPT13"10"13"00000000000000000000000000000000000000000
    1067762451/4"30,000503/4 Female NPT1 1/2 Female NPT1 1/2 Female NPT15"17"22"0000000000000000000000000000000000000000000
    15010476531/4"40,0001003/4 Female NPT2 Female NPT2 Female NPT15"17"26"0000000000000000000000000000000000000000000
    235174127903/8"50,0001403/4 Female NPT3 Female NPT3 Female NPT17"20"32"0000000000000000000000000000000000000000000
     

    Precision Flow-Adjustment Valves with Barbed Fittings for Fuel

    Add fine flow control to tubing lines for butane, diesel fuel, fuel oil, gasoline, kerosene, natural gas, and propane. These valves have a barbed fitting that grips onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments. Valves have metal-to-metal seats that resist temperature fluctuations.
    Brass Body—90° Elbow
    Image of Product. Front orientation. Contains Annotated. Flow-Adjustment Valves. Precision Flow-Adjustment Valves with Barbed Fittings for Fuel.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Overall
    For Tube
    ID
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Ht.
    Lg.
    Temp. Range,
    ° F
    Seal Material
    Needle
    Material
    Port-to-Port
    Lg.
    For Use With
    Valve
    Type
    Each
    NPTF Male × Barbed
    5/8"3/8
    		2.9200 psi @ 70° F3"2 5/16"-30 to 225Fluoroelastomer
    		Brass1 5/16"Oil, Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, PropaneNeedle00000000000000
    3/4"1/2
    		5.5200 psi @ 70° F4 1/8"2 1/2"-10 to 400Fluoroelastomer
    		Brass1 7/16"Oil, Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, PropaneNeedle0000000000000
     

    Precision Flow-Adjustment Valves with Push-to-Connect Fittings for Chemicals

    Insert tubing into the fittings on these valves—no heat, solder, or flux required. With a fluoroelastomer seal and a PVDF body, they can withstand aggressive and corrosive solutions in chemical-processing applications. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Threads and a hex nut below the handle allow you to install these valves in instrument panels. They have a nut that can be tightened to compress the packing if it leaks.
    PVDF Body
    Image of Product. Front orientation. Flow-Adjustment Valves. Precision Flow-Adjustment Valves with Push-to-Connect Fittings for Chemicals.
    Overall
    For Tube
    ID
    For Tube
    OD
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Ht.
    Lg.
    Seal Material
    Panel Cutout
    Dia.
    Packing
    Material
    Needle
    Material
    End-to-End
    Lg.
    For Use With
    Valve
    Type
    Each
    Push to Connect × Push to Connect
    1/8" 1/4" 0.3125 psi @ 140° F2 5/8"2 11/16"Fluoroelastomer
    		7/8"PTFE
    		PVDF2 11/16"Water, Oil, Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Xenon, XyleneNeedle0000000000000
    1/4" 3/8" 0.4125 psi @ 140° F2 5/8"2 11/16"Fluoroelastomer
    		7/8"PTFE
    		PVDF2 11/16"Water, Oil, Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Xenon, XyleneNeedle000000000000
     

    Precision Flow-Adjustment Valves with Yor-Lok Fittings for Chemicals

    For extra gripping power and a strong seal, these valves have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. The 316 stainless steel body, seal and needle, and the PTFE seat and packing can withstand aggressive and corrosive solutions in chemical-processing applications. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Threads and a hex nut below the handle allow you to mount these valves in instrument panels. All have a nut that can be tightened to compress the packing if it leaks. Valves have bubble-tight soft seats that provide a tight seal when the valve is completely closed.
    316 Stainless Steel Body
    Image of Product. Front orientation. Flow-Adjustment Valves. Precision Flow-Adjustment Valves with Yor-Lok Fittings for Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Overall
    For Tube
    OD
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Ht.
    Lg.
    Temp. Range,
    ° F
    Seal
    Material
    Panel Cutout
    Dia.
    Seat Material
    Packing
    Material
    Needle Material
    End-to-End
    Lg.
    For Use With
    Valve
    Type
    Each
    Yor-Lok × Yor-Lok
    1/4" 0.567,000 psi @ 400° F3 5/8"2 7/8"-20 to 400PTFE
    		0.87"316 Stainless SteelPTFE
    		316 Stainless Steel2 7/8"Oil, Acetone, Air, Ammonia, Argon, Butane, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Soap Solutions, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Xenon, XyleneNeedle00000000000000
    3/8" 0.567,000 psi @ 400° F3 5/8"2 7/8"-20 to 400PTFE
    		0.87"316 Stainless SteelPTFE
    		316 Stainless Steel2 7/8"Oil, Acetone, Air, Ammonia, Argon, Butane, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Soap Solutions, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Xenon, XyleneNeedle0000000000000
    1/2" 0.567,000 psi @ 400° F3 5/8"3 1/8"-20 to 400PTFE
    		0.87"316 Stainless SteelPTFE
    		316 Stainless Steel3 1/8"Oil, Acetone, Air, Ammonia, Argon, Butane, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Soap Solutions, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Xenon, XyleneNeedle0000000000000
     

    PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals

    With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered double diaphragm pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All can run dry.
    Threaded Side Intake and Threaded Side Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals, Threaded Side Intake and Threaded Side Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Overall
    Max. Flow
    Rate, gpm
    Max. Solids
    Dia.
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    2.50.06"4.81/8 Female NPT1/4 Female NPT1/4 Female NPT3 3/8"5 1/2"6 1/2"0000000000000000000000000000000000000000000
    6.70.08"9.31/8 Female NPT3/8 Female NPT3/8 Female NPT3 1/2"5 7/8"7 5/8"0000000000000000000000000000000000000000
    160.16"291/4 Female NPT1/2 Female NPT1/2 Female NPT6"9 3/16"8"000000000000000000000000000000000000000000
    390.24"461/4 Female NPT1 Female NPT1 Female NPT8"10 7/8"10 3/8"000000000000000000000000000000000000000000
     

    Threaded Flow-Adjustment Valves for Fuel

    To automatically shut off the flow of diesel fuel, fuel oil, kerosene, and oil in case of fire, these valves automatically close and the handle permanently fuses in place when the ambient temperature reaches 165° F. To reuse the valve, replace the handle (sold separately).
    Brass Body—Straight
    Image of Product. Front orientation. Flow-Adjustment Valves. Threaded Flow-Adjustment Valves for Fuel.
    Flow-Adjustment Valves
    Replacement
    Handles
    Overall
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Ht.
    Lg.
    Temp. Range,
    ° F
    Seal Material
    End-to-End
    Lg.
    Certification
    For Use With
    Valve
    Type
    Each
    Each
    NPT Female × NPT Female
    3/8 Not Rated10 psi @ 70° F3"1 3/4"20 to 165Fluoroelastomer
    		1 3/4"UL Listed
    		Oil, Diesel Fuel, Fuel Oil, KeroseneGlobe0000000000000000000000000
    1/2 Not Rated10 psi @ 70° F3 1/2"2"20 to 165Fluoroelastomer
    		2"UL Listed
    		Oil, Diesel Fuel, Fuel Oil, KeroseneGlobe000000000000———0
    3/4 Not Rated10 psi @ 70° F3 1/2"2 1/2"20 to 165Fluoroelastomer
    		2 1/2"—Oil, Diesel Fuel, Fuel Oil, KeroseneGlobe000000000000000000000000
    1Not Rated10 psi @ 70° F6 5/8"2 5/8"20 to 165Fluoroelastomer
    		2 5/8"—Oil, Diesel Fuel, Fuel Oil, KeroseneGlobe0000000000000000000000000
     

    Threaded Precision Flow-Adjustment Valves for Chemicals

    To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a fluoroelastomer seal and a plastic body. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.
    White PVDF Body
    Image of Product. Front orientation. Flow-Adjustment Valves. Threaded Precision Flow-Adjustment Valves for Chemicals, White, Straight.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Max. Temp.,
    ° F
    Panel Cutout
    Dia.
    End-to-End
    Lg.
    Valve
    Type
    For Use With
    Seal Material
    Seat
    Material
    Needle
    Material
    Each
    NPT Female × NPT Female
    1/4 0.64150 psi @ 70° F3001 5/16"2 1/2"NeedleWater, Oil, Food, Beverage, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric AcidFluoroelastomer
    		PTFEPolypropylene00000000000000
    3/8 0.72150 psi @ 70° F3001 5/16"2 1/2"NeedleWater, Oil, Food, Beverage, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric AcidFluoroelastomer
    		PTFEPolypropylene0000000000000
    1/2 0.79150 psi @ 70° F3001 5/16"2 1/2"NeedleWater, Oil, Food, Beverage, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Mineral Spirits, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric AcidFluoroelastomer
    		PTFEPolypropylene0000000000000
     

    Constant-Flow-Rate Gear Pumps without Motor for Oil

    Image of Product. Front orientation. Gear Pumps. Constant-Flow-Rate Gear Pumps without Motor for Oil.
    A cast iron housing and steel gears allow these gear pumps to be used to dispense oil and fuel such as hydraulic oil and diesel fuel. Select your own motor to tailor them to your application. Use an air or electric motor with a coupling and belt/pulley drive. They produce a smooth flow of liquid for applications such as engine lubrication. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.
    Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
    Required
    hp, hp
    Intake (NPT)
    Discharge (NPT)
    Overall
    Shaft
    Max. Flow Rate @
    25 psi, gpm
    Max. Flow
    Rate
    Max. ft. of
    Head, ft.
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    @ 25
    psi
    @ 100
    psi
    Pipe
    Size
    Connection
    Gender
    Pipe
    Size
    Connection
    Gender
    Lg.
    Wd.
    Ht.
    Dia.
    Lg.
    Ctr.-to-Base
    Lg.
    Each
    For 1,725 rpm Maximum Motor Speed
    8.99 gpm46220020,000-20 to 4003/411/2
    		ThreadedFemale1/2
    		ThreadedFemale7 1/4"3 7/16"4 1/2"5/8"1 9/16"3"00000000000000000
     

    Constant-Flow-Rate Gear Pumps without Motor for Chemicals

    Image of Product. Front orientation. Gear Pumps. Constant-Flow-Rate Gear Pumps without Motor for Chemicals.
    With a 316 stainless steel housing and stainless steel gears, these gear pumps are often used to dispense chemicals such as ethylene glycol, isopropyl alcohol, and nitric acid. Use an electric motor with a coupling and belt/pulley drive. They produce a smooth flow of liquid. All are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Do not use with solids.
    Required
    hp, hp
    Intake (NPT)
    Discharge (NPT)
    Overall
    Shaft
    Max. Flow Rate @
    25 psi, gpm
    Max. Flow
    Rate
    Max. ft. of
    Head, ft.
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    @ 25
    psi
    @ 100
    psi
    Pipe
    Size
    Connection
    Gender
    Pipe
    Size
    Connection
    Gender
    Lg.
    Wd.
    Ht.
    Dia.
    Lg.
    Ctr.-to-Base
    Lg.
    Each
    For 1,800 rpm Maximum Motor Speed
    4.34 gpm346.315020,000-50 to 4501/43/41/2
    		ThreadedFemale1/2
    		ThreadedFemale6 1/4"3"3 3/4"1/2"1 1/4"2 5/8"00000000000000000
    10.210 gpm346.315020,000-50 to 4501/21 1/23/4
    		ThreadedFemale3/4
    		ThreadedFemale7 1/2"3 3/8"4 3/8"5/8"1 3/4"3"0000000000000000
     

    Hazardous Location Electric Drum Pumps for Water, Oil, Coolants, and Chemicals

    Image of Product. Front orientation. Drum Pumps. Hazardous Location Electric Drum Pumps for Water, Oil, Coolants, and Chemicals.
    These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. They are often used with lubricating oil as well as with chemicals such as detergents and etching and cleaning solutions. Their electric motors are explosion proof and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Division 2, Groups F and G environments where flammable gases and combustible dust may be present.
    Drum Pumps
    Pump Repair Kits
    Temp.,
    ° F
    Intake
    Discharge
    (Pump Body)
    Flow Rate,
    gpm
    For Container
    Size, gal.
    Discharge
    Pressure, psi
    Max. Viscosity,
    cP
    Min.
    Max.
    Power,
    hp
    Current,
    amp
    For Drum Opening
    Size
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    Connection
    For Tube
    ID
    Gender
    Certification
    Each
    Each
    120V AC—Single Phase—Hardwire—With Thermal Overload Protection
    48.55514300-402101/25.341 mm1 5/8"39"Pump BodyBarbed1"MaleC-UL Listed
    UL Listed
    		00000000000000000000000000000000
     
    Pump Replacement Parts
    Component
    Each
    Flange Bearing Unit000000000000000
    Guide Bushing0000000000000
    M-Tool000000000000
    Rotor0000000000000
    Seal000000000000
    Snap Ring000000000000
    Star Bearing00000000000000

    PVDF Long-Life Air-Powered Drum Pumps for Chemicals

    Image of Product. Front orientation. Drum Pumps. PVDF Long-Life Air-Powered Drum Pumps for Chemicals.
    A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.
    Pump Repair Kits—Repair kits include O-rings, valves, and diaphragms.
    Drum Pumps
    Pump Repair Kits
    Temp.,
    ° F
    Intake
    Discharge
    Flow Rate,
    gpm
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    Air Pressure,
    psi
    Air Consumption,
    ft³/min
    For Drum Opening
    Size
    Includes
    Air
    Connection
    Connection
    Pipe Size
    Tube
    Lg.
    Discharge
    Location
    Connection
    Pipe Size
    Each
    Each
     
    PTFE Diaphragm
    13553,00040210100122 NPTDrum Connector1/4 Female NPTThreaded1/2 Female NPT36"Pump BodyThreaded1/2 Female NPT0000000000000000000000000000000
     

    Quick-Dispensing Drum Pumps for Fuel

    Image of Product. Front orientation. Drum Pumps. Quick-Dispensing Drum Pumps for Fuel.
    A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps. The handle can be mounted with the knob above or below the pump body. Lock the handle with a padlock (not included).
    Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
    Pump Repair Kits—Repair kits include a gasket, a piston ring, O-rings, and valves.
    Drum Pumps
    Pump Repair Kits
    Temp.
    Intake
    Discharge (Pump Body)
    Flow Rate,
    fl oz/stroke
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.,
    ° F
    For Drum Opening
    Size
    Includes
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    For Discharge
    Hose ID
    Connection
    Pipe
    Size
    Gender
    Thread
    Type
    Spout
    Type
    Drum Pump
    Type
    Max. Shackle
    Dia.
    Each
    Each
    3255410Not Rated702 NPTDrum Connector1 5/16"34"Spout End
    Pump Body    		3/4"Threaded3/4
    		FemaleNPT
    		RemovableLever Handle1/4"000000000000000000000000000
     
    Connectors
    Connection
    Each
    M64 Buttress × 2 NPT0000000000000

    Precision Flow-Adjustment Valves with Barbed Fittings for Chemicals

    Image of Product. Front orientation. Flow-Adjustment Valves. Precision Flow-Adjustment Valves with Barbed Fittings for Chemicals.
    Barbs grip onto tubing, providing a secure hold. To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a PTFE seal and a PVDF body. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Threads and a hex nut below the handle allow you to install these valves in instrument panels. They have a nut that can be tightened to compress the packing if it leaks.
    For Tube
    ID
    For Tube
    OD
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Max. Temp.,
    ° F
    Panel Cutout
    Dia.
    End-to-End
    Lg.
    Valve
    Type
    For Use With
    Seal
    Material
    Packing
    Material
    Needle
    Material
    Each
    Black PVDF Body
     
    Barbed × Barbed
    1/4" 3/8" 0.3125 psi @ 140° F1407/8"3 5/16"NeedleWater, Oil, Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Xenon, XylenePTFE
    		PTFE
    		PVDF0000000000000
    3/8" 1/2" 0.3125 psi @ 140° F1407/8"3 5/16"NeedleWater, Oil, Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Xenon, XylenePTFE
    		PTFE
    		PVDF000000000000
    1/2"5/8" 0.4125 psi @ 140° F1407/8"3 5/16"NeedleWater, Oil, Air, Argon, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Methanol (Methyl Alcohol), Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide (Caustic Soda), Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Xenon, XylenePTFE
    		PTFE
    		PVDF000000000000
     

    Air-Powered Drum Pumps for Flammable Liquid

    Image of Product. Front orientation. Drum Pumps. Air-Powered Drum Pumps for Flammable Liquid.
    These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Motor is nonsparking for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.
    Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
    Temp.,
    ° F
    Intake
    Discharge
    (Pump Body)
    Flow Rate,
    gpm
    For Container
    Size, gal.
    Max. Viscosity,
    cP
    Min.
    Max.
    Air Pressure,
    psi
    Air Consumption,
    ft³/min
    For Drum Opening
    Size
    Includes
    Air
    Connection
    Tube
    OD
    Tube
    Lg.
    Discharge
    Location
    Connection
    For Tube
    ID
    Gender
    Certification
    Features
    Each
    26551,100-4021044 to 87532 NPTDrum Connector3/8 Female NPT1 5/8"39"Pump BodyBarbed1"MaleCE Marked
    		Bonding and Grounding Wires, Hanger0000000000000000
    26551,100-4021044 to 87532 NPTDrum Connector3/8 Female NPT1 5/8"47"Pump BodyBarbed1"MaleCE Marked
    		Bonding and Grounding Wires, Hanger000000000000000
    53551,000-4021044 to 87532 NPTDrum Connector3/8 Female NPT1 5/8"39"Pump BodyBarbed1"MaleCE Marked
    		Bonding and Grounding Wires, Hanger000000000000000
    53551,000-4021044 to 87532 NPTDrum Connector3/8 Female NPT1 5/8"47"Pump BodyBarbed1"MaleCE Marked
    		Bonding and Grounding Wires, Hanger000000000000000
     
    Pump Replacement Parts
    Component
    Each
    Coupling0000000000000
    Hand Wheel000000000000
    back to top