About On/Off Valves
More
Threaded On/Off Valves
Use these valves in general purpose applications, such as those with water, oil, air, and inert gas.
Bronze valves are stronger and more durable than brass valves for a longer service life. Full-port valves do not restrict flow. Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
- Valve Type: Ball
- For Use With:
NPT: Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
BSPP and BSPT: Air, Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
UN/UNF: Air, Argon, Oil, Steam, Water - Seal Material: PTFE Plastic
Lever handles give you the most leverage for quickly opening and closing valves with minimal effort.
| Thread Size  | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Ball Material | Each | |
UN/UNF (SAE Straight) Female × UN/UNF (SAE Straight) Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 5/16"-12 | 68 | 600 psi @ 100° F | 150 psi @ 365° F | -20° to 450° | Full | 3 5/8" | Brass | 4581K45 | 0000000 |
On/Off Valves with 37° Flared Tube Fittings for Fuel
- Valve Type: Ball
- For Use With: Diesel Fuel, Fuel Oil, Gasoline
- Seal Material: PTFE Plastic
These valves have 37° flared tube fittings that form a tight seal on metal tubing lines to transfer diesel fuel, fuel oil, and gasoline. All are full port, so they do not restrict flow.
| Thread Size | For Tube OD | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Aluminum Body | ||||||
|---|---|---|---|---|---|---|
37° Flared × 37° Flared | ||||||
| 1 5/16"-12 | 1" | 200 psi @ 70° F | -40° to 250° | 4 1/4" | 3710K39 | 0000000 |
On/Off Inline Hydraulic Valves
Start and stop flow with a quarter turn of the handle. Valves are full port, so they do not restrict flow.
UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.
Inlet/Outlet Connection | O'all | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Seal Material | Lg. | Wd. | Ht. | Port-to-Port Lg. | Temp. Range, °F | Valve Type | Each | |
Zinc-Plated Steel Body with Chrome-Plated Steel Ball | ||||||||||||
| 1 5/16"-12 | 16 | 47 | 7,250 | Acetal Plastic, Fluoroelastomer Rubber | 9 1/16" | 2 3/4" | 5 1/2" | 4 7/16" | 0° to 212° | Ball | 4715K66 | 0000000 |
Lockable On/Off Inline Hydraulic Valves
Lock the handle using a padlock. When unlocked, a quarter turn of the handle starts and stops flow. Valves are full port, so they do not restrict flow.
UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.
Inlet/Outlet Connection | O'all | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Dash Size | Max. Flow Rate, gpm | Max. Pressure, psi | Seal Material | Lg. | Wd. | Ht. | Port-to-Port Lg. | For Max. Padlock Shackle Dia. | Temp. Range, °F | Valve Type | Each | |
Zinc-Plated Steel Body with Chrome-Plated Steel Ball | |||||||||||||
| 1 5/16"-12 | 16 | 47 | 7,250 | Acetal Plastic, Fluoroelastomer Rubber | 9 1/16" | 2 15/16" | 5 1/2" | 4 7/16" | 5/16" | 0° to 212° | Ball | 4776K66 | 0000000 |
International Standard ISO B Quick-Disconnect Hose Couplings for Hydraulic Fluid
A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them if you need frequent access to a hydraulic hose line. All of the International Standard ISO B quick-disconnect plugs are compatible with any of the International Standard ISO B quick-disconnect sockets of the same coupling size, regardless of the pipe size. Couplings meet ISO 7241-1 Series B dimensional and performance standards and are compatible with Parker 60 couplings. Also known as double shut-off couplings, the plugs and sockets both have a shut-off valve that stops the flow when the coupling is separated.
Plugs are also known as nipples.
Sleeve-lock sockets connect by sliding back the sleeve on the socket, inserting the plug, and releasing the sleeve. To disconnect, slide the sleeve back and pull out the plug.
Zinc-plated steel is stronger and more durable than other metals. It has fair corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size. Pressure ratings are given for static (constant) pressure conditions.
Warning: Never attempt to connect or disconnect couplings when operating at maximum pressure. Stop the flow before you disconnect the line.
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: -40° to 250° F
- Compatible With: ISO 7241-1 Series B, Parker 60
- Specifications Met: ISO 7241-1 Series B
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: -40° to 250° F
- Compatible With: ISO 7241-1 Series B, Parker 60
- Specifications Met: ISO 7241-1 Series B