We will reply to your message within an hour.
Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.
These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.
Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.
Close off unused outlets.
Add depth to your weatherproof outlet box.
These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.
Rain, snow, and wet conditions won't damage these corrosion-resistant covers.
Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.
Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.
Control access to these enclosures with a key-operated lock.
View all sides of your installed components.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.
Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.
With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.
Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.
Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.
Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.
Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.
Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.
Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.
Inspect components without opening the cover.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.
Check on the contents inside these enclosures from every angle without opening them in wet environments.
House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.
Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.
Protect monitors and televisions from environmental damage with these enclosures.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.
These durable chests are dent resistant.
These chests have floor-mounting baseplates so they can be locked in place or detached for portability.
The door is rimmed with a gasket to keep out moisture and dust. These chests are often mounted to the underbed of a truck.
Mesh construction provides visibility and air circulation. The hinged lid and drop-front gate allow quick access to large equipment.
Also known as job boxes, these chests secure equipment and supplies on-site.
Organize equipment and supplies in these chests, also known as job boxes.
These chests are lightweight and corrosion resistant.
Designed for marine environments, these chests have stainless steel hardware, so no parts will rust or corrode, even in saltwater.
Keep your workplace safe and free up valuable floor space by storing drums outdoors.
These cabinets are more corrosion resistant than steel.
These cabinets are scratch and corrosion resistant for extra durability outdoors.
Mesh sides on this cabinet allow air circulation and visibility.
In addition to resisting weather, rust, rot, and dents, these sheds snap together for easy assembly.
Racks have a reservoir to contain leaks from damaged drums and removable grating for cleaning.
Temporarily store and warm items—these enclosures heat the space inside them.
For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.