Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Close off unused outlets.

These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.

Close off unused outlets.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Rain, snow, and wet conditions won't damage these corrosion-resistant covers.

Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.

Aluminum enclosures are a lightweight yet durable alternative to stainless steel.

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

These enclosures have internal slots to hold circuit boards in place.

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.

These kits come with everything you need to mount enclosures to round poles or beams. They clamp on to a range of pole diameters to hold enclosures securely in place.

Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

In addition to an outlet on the end, these cords have multiple inline outlets.

Plug these portable distribution boxes into a power source, such as a generator, to power equipment when electricity is not available. They're also known as spider boxes.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

If there’s a power outage, flip the toggle for each circuit on these switches to backup power.