Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Also known as wall packs, these lights mount to exterior walls and ceilings.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

No need for wiring—these lights plug-in with a three-prong plug.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Mount lights in recessed spaces so the lens is flush with the wall.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

These lights fit into ceiling cutouts.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens.

Install sockets for medium (standard household) screw-in base light bulbs.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Illuminate steps to reduce the risk of tripping or falling, especially at night or in poorly lit areas.

Customize these lights to label doors or areas of a building.

A sealed lens keeps moisture out to protect these lights against washdowns.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust.

Also known as grow lights, these lights encourage growth in herbs, flowers, and other plants indoors.

To keep contaminants from entering your clean room, these lights seal against drop ceilings with an airtight gasket.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Light up large, open rooms where you need a quick setup and takedown, such as a room under construction. Just hang these lights from a ceiling up to 30' high and they’re ready to go.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Use these with portable lights that use screw-in bulbs.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

Point light where it’s needed—even in wet areas. These lights are sealed against splashing and dripping water.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

If the power goes out, you’ll find these flashlights right away.

Always have a flashlight on hand—these attach to a key ring.

The smooth stainless steel surface allows for easy cleaning.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

All of these flashlights stand up to wet environments.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

Turn standard light bulb sockets into standalone floodlight fixtures using these bulbs, which have an aluminum reflector to focus light downward and add a finished look.

Prongs on the side of the base plug into specialty track lighting fixtures.

These bulbs have a bi-pin connection to lock into sockets.

Use these bulbs in standard sockets, panels, and appliances.

Use these bulbs in ovens and equipment that reaches temperatures up to 500° F.

Pins on the base lock these bulbs into sockets to withstand vibration. They're often used in machines and elevators.

These slender bulbs are used in lamps and task lights.

Also known as beacon lights and signal lamps, these bulbs provide high-intensity light so they're often used in security warning devices and machinery.