Oxygen Detectors
When your work area has too much or too little oxygen, these detectors alert you with an audible alarm, warning light, and vibrating alarm. You can adjust the high and low alarm trigger points to suit your environment.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check can be performed with the press of a button.
The detector with a nonreplaceable battery should be thrown away at the end of its two-year lifespan.
| Measuring Range, % Vol. | Volume | Ht. | Wd. | Dp. | Temperature Range, °F | Batteries Included | Battery Chemistry | Environmental Rating | Each | |
Detectors with Nonreplaceable Battery | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0-25 | 95 dBA @ 30 cm. | 3 1/2" | 2" | 1" | -4° to 122° | Yes | Lithium | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Group G NEC Zone 0 Groups IIC, IIB, IIA IEC Zone 1 Groups IIC, IIB, IIA IP67 | 00000000 | 0000000 |
Detectors with Replaceable Battery | ||||||||||
| 0-25 | 95 dBA @ 30 cm. | 3 1/2" | 2" | 1" | -4° to 122° | Yes | Lithium | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Group G NEC Zone 0 Groups IIC, IIB, IIA IEC Zone 0 Groups IIC, IIB, IIA | 00000000 | 000000 |
| Batteries (Pkg. of 1) | 0000000 | Pkg. | 000000 |
Portable Multi-Gas Detectors with Probe
Use the probe to test the air in a hazardous area before entering. Great for confined spaces. This detector alerts you with an audible alarm, warning light, and vibrating alarm in the presence of combustible and toxic gases. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
| Detects (Measuring Range) | Volume | Temperature Range, °F | Batteries Included | Includes | Tube Lg., ft. | Environmental Rating | Each | |
| Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (0-100% LEL), Oxygen (0-30% Vol.), Carbon Monoxide (0-1,999 ppm), Hydrogen Sulfide (0-200 ppm) | 95 dBA @ 30 cm. | -40° to 140° | Yes | Sampling Probe, Tubing Assembly, Rechargeable Lithium Ion Battery for Probe | 25 | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA IP68 | 00000000 | 000000000 |
Portable Multi-Gas Detectors
When this detector senses high levels of combustible and toxic gases, it alerts you with an audible alarm, warning light, and vibrating alarm. You can adjust the alarm trigger points to suit your environment. There is also a motion sensor that sounds an alarm if the user becomes disabled.
A calibration check must be performed on the detector before each use to verify that it is working properly. The check requires a regulator and cylinder (sold separately).
Note: LEL is lower explosive limit.
| Detects (Measuring Range) | Volume | Temperature Range, °F | Batteries Included | Environmental Rating | Each | |
| Acetone, Butane, Hydrogen, Methane, Pentane, Propane, Toluene (0-100% LEL), Oxygen (0-30% Vol.), Carbon Monoxide (0-1,999 ppm), Hydrogen Sulfide (0-200 ppm) | 95 dBA @ 30 cm. | -40° to 140° | Yes | NEC Class I Divisions 1, 2 Groups A, B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 0 Groups IIC, IIB, IIA IP68 | 00000000 | 000000000 |
Combustion Efficiency Meters
Also known as a combustion analyzer, this meter measures boiler and furnace combustion efficiency. It automatically calibrates to normal atmospheric oxygen.
Measurement Range | Calculated Range | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use On | Ambient Temp. | Flue Gas Temp. | Flue Gas Oxygen | Carbon Monoxide, ppm | Combustion Efficiency | Carbon Dioxide | Air Free Carbon Monoxide, ppm | Excess Air | Accuracy | Batteries Included | Each | |
| Kerosene, Natural Gas, Oil, Propane | 25° to 110° F | -4° to 1200° F | 0-20.9% | 0-2,000 | 0.1%-100% | 0-15% | 0-9,999 | 0-250% | ±0.3% of Oxygen Content | Yes | 0000000 | 0000000 |
Quick-Spot Vacuum and Pressure Gas Leak Detectors
The aerosol can dispenses a foam that bubbles over pressure leaks and forms a crater over vacuum leaks, providing quick and reliable leak detection, while saving time and energy costs. This noncorrosive, nonflammable detector finds leaks in pipes, tubes, fittings, tanks, and cylinders. It washes off with water.
| Temp. Range , ° F | Container Net Weight, oz. | Each | |
| 35° to 170° | 14 | 0000000 | 000000 |
High-Visibility Quick-Spot Compressed Gas Leak Detectors
These detectors are fluorescent green. Bubbling action at the source provides quick and reliable leak detection, saving time and energy costs. These noncorrosive, nonflammable detectors find leaks in pipes, tubes, fittings, tanks, and cylinders. They adhere to vertical surfaces. All wash off with water.
Use a UV flashlight for enhanced viewing.
Quick-Spot Compressed Gas Leak Detectors
Bubbling action at the source provides quick and reliable leak detection, saving time and energy costs. These noncorrosive, nonflammable detectors find leaks in pipes, tubes, fittings, tanks, and cylinders. They wash off with water.
Detectors that are NSF registered P1 can be used in food-processing environments.
Container | ||||||
|---|---|---|---|---|---|---|
| Oxygen Compatible | Temp. Range, ° F | Size | Type | Specifications Met | Each | |
| No | -35° to 200° | 1 gal. | Jug | MIL-PRF-25567 | 00000000 | 000000 |
| No | 35° to 160° | 1 gal. | Jug | __ | 0000000 | 00000 |
| No | 35° to 160° | 8 fl. oz. | Bottle with Applicator | __ | 0000000 | 0000 |
| No | 35° to 160° | 8 fl. oz. | Squeeze Bottle | __ | 0000000 | 0000 |
| Yes | -65° to 200° | 1 gal. | Jug | MIL-PRF-25567 | 00000000 | 00000 |
| Yes | -65° to 200° | 8 fl. oz. | Squeeze Bottle | MIL-PRF-25567 | 00000000 | 0000 |
| Yes | 0° to 180° | 8 fl. oz. | Bottle with Applicator | MIL-PRF-25567, NSF Registered P1 | 000000000 | 00000 |
| Yes | 30° to 200° | 1 gal. | Jug | MIL-PRF-25567 | 00000000 | 00000 |
| Yes | 30° to 200° | 8 fl. oz. | Squeeze Bottle | MIL-PRF-25567 | 00000000 | 0000 |
| Yes | 35° to 160° | 4 fl. oz. | Squeeze Bottle | MIL-PRF-25567 | 0000000 | 0000 |
| Yes | 35° to 175° | 1 gal. | Jug | MIL-PRF-25567, NSF Registered P1 | 000000000 | 00000 |
| Yes | 35° to 175° | 1 qt. | Spray Bottle | MIL-PRF-25567, NSF Registered P1 | 000000000 | 00000 |
Ultrasonic Gas Leak Detectors
This detector converts ultrasonic waves to an audible sound so you can find leaks. Unlike typical leak detectors, this unit doesn’t rely only on the presence of a gas to work, making it suitable for a wider range of applications. In addition to gas leaks, it identifies ultrasonic sound caused by failing solenoids, valves, and bearings.
For systems under 10 psi, use the optional ultrasonic sound generator.
Import regulations restrict sales to the listed areas.
