Oxygen-Free Copper Sheets

Filter by

Material

101 Copper

102 Copper

System of Measurement

Thickness

Width

Length

Shape

Temper Designation

Temper Rating

Specifications Met

Certificate Type

Material Certificate with Traceable Lot Number

Appearance

Plain

Hardness Rating

Soft

Thermal Conductivity @ Temperature

226 BTU/(hr⋅ft⋅°F) @ 68° F

Yield Strength

10,000 psi to 19,999 psi

20,000 psi to 99,999 psi

Hardness

Heat Treatment

Tolerance Rating

RoHS

REACH

DFARS Specialty Metals

Exempt

Melting Point Temperature

1,981° F

Fabrication

Cold Worked

Modulus of Elasticity

17,000 ksi

Export Control Classification Number (ECCN)

EAR99

Surface Resistivity

1× 10^9 cir. mil·ohm/ft

Density

0.323 lb/in³

Forward

How can we improve?

187 Products

About Copper, Brass & Bronze

Compare over 30 copper, brass, and bronze alloys to find the right material for you—all with material certificates for traceability.

Super-Conductive 101/102 Copper Sheets and Bars

With at least 99.95% copper content, 101/102 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Softened (Annealed) Temper Sheets

Yield Strength: 10,000 psi
Hardness: Rockwell F65 (Soft)
Temper Rating: Softened (Annealed)
Heat Treatable: No
Specifications Met: See table

			12" × 12"		12" × 36"
Thick.	Thick. Tolerance Range	Specifications Met		Each		Each
0.02"	-0.007" to 0.007"	ASTM B152	0000000	000000	0000000	0000000
0.032"	-0.007" to 0.007"	ASTM F68	0000000	00000	0000000	000000
0.04"	-0.007" to 0.007"	ASTM B152	0000000	00000	0000000	000000
0.062"	-0.007" to 0.007"	ASTM F68	0000000	00000	0000000	000000
1/8"	-0.007" to 0.007"	ASTM F68	0000000	000000	0000000	000000

1/8 to 1/4 Hard Temper Sheets

Yield Strength: 34,000 psi
Hardness: Rockwell F60 (Soft)
Temper: H00 (1/8 Hard) to H01 (1/4 Hard)
Heat Treatable: No
Specifications Met: ASTM B152, ASTM F68

2" × 24"
Thick.	Thick. Tolerance Range		Each
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	00000
1/8"	-0.006" to 0.006"	000000000	00000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
4" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
6" × 6"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	00000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	00000000	00000
1/8"	-0.006" to 0.006"	00000000	00000
3/16"	-0.007" to 0.007"	000000000	00000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000
6" × 12"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	00000
0.093"	-0.006" to 0.006"	000000000	00000
1/8"	-0.006" to 0.006"	000000000	00000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000
6" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	000000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	000000000	00000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	000000
1/2"	-0.015" to 0.015"	000000000	000000

12" × 12"
Thick.	Thick. Tolerance Range		Each
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	00000
0.05"	-0.004" to 0.004"	000000000	00000
0.063"	-0.005" to 0.005"	00000000	00000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000
12" × 24"
0.025"	-0.003" to 0.003"	000000000	00000
0.032"	-0.003" to 0.003"	00000000	00000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	000000
1/2"	-0.015" to 0.015"	00000000	00000000
12" × 48"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	00000000	000000
3/8"	-0.012" to 0.012"	00000000	00000000
1/2"	-0.015" to 0.015"	00000000	00000000
24" × 24"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	000000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	000000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	000000000	000000
1/8"	-0.006" to 0.006"	000000000	000000
3/16"	-0.007" to 0.007"	000000000	000000
1/4"	-0.009" to 0.009"	000000000	000000
3/8"	-0.012" to 0.012"	000000000	00000000
1/2"	-0.015" to 0.015"	000000000	00000000
24" × 48"
0.025"	-0.003" to 0.003"	000000000	000000
0.032"	-0.003" to 0.003"	00000000	000000
0.04"	-0.004" to 0.004"	000000000	000000
0.05"	-0.004" to 0.004"	000000000	000000
0.063"	-0.005" to 0.005"	00000000	000000
0.08"	-0.006" to 0.006"	000000000	000000
0.093"	-0.006" to 0.006"	00000000	000000
1/8"	-0.006" to 0.006"	00000000	000000
3/16"	-0.007" to 0.007"	000000000	00000000
1/4"	-0.009" to 0.009"	00000000	00000000
3/8"	-0.012" to 0.012"	00000000	00000000
1/2"	-0.015" to 0.015"	00000000	00000000

1/2 Hard Temper Sheets

Yield Strength: Not Rated
Hardness: Rockwell F75 (Soft)
Temper: H02 (1/2 Hard)
Heat Treatable: No
Specifications Met: ASTM F68

		4" × 4"		6" × 6"		9" × 9"		12" × 12"
Thick.	Thick. Tolerance Range		Each		Each		Each		Each
1/4"	-0.012" to 0.012"	00000000	000000	00000000	000000	00000000	0000000	00000000	0000000
3/8"	-0.015" to 0.015"	00000000	00000	00000000	000000	00000000	000000	00000000	000000
1/2"	-0.015" to 0.015"	00000000	000000	00000000	000000	00000000	000000	00000000	000000
5/8"	-0.019" to 0.019"	00000000	000000	0000000	000000	0000000	000000	00000000	000000
3/4"	-0.019" to 0.019"	00000000	000000	0000000	000000	0000000	000000	00000000	000000
7/8"	-0.024" to 0.024"	00000000	000000	0000000	000000	0000000	000000	00000000	000000
1"	-0.024" to 0.024"	000000	000000	0000000	000000	0000000	000000	00000000	000000

1/2 Hard Temper Bars

Yield Strength: Not Rated
Hardness: Rockwell F75 (Soft)
Temper: H02 (1/2 Hard)
Heat Treatable: No
Specifications Met: See table

1/16" Thick. (-0.006" to 0.006" Tolerance)
Wd.	Specifications Met	Straightness Tolerance		1 ft. Lg.	2 ft. Lg.	4 ft. Lg.
1"	ASTM B152	3/4" per 5 ft.	00000000	000000	000000	000000
2"	ASTM B152	3/4" per 5 ft.	00000000	00000	00000	00000
4"	ASTM B152	3/4" per 5 ft.	00000000	00000	00000	000000
6"	ASTM B152	3/4" per 5 ft.	00000000	00000	000000	000000
1/8" Thick. (-0.004" to 0.004" Tolerance)
1"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	00000
2"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
6"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
1/4" Thick. (-0.005" to 0.005" Tolerance)
1/4"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	00000
1/2"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	00000
1"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	000000
2"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
6"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
3/8" Thick. (-0.005" to 0.005" Tolerance)
3/8"	ASTM B187	3/4" per 5 ft.	00000000	00000	00000	000000
1"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
2"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
1/2" Thick. (-0.005" to 0.005" Tolerance)
1/2"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
1"	ASTM B187	3/4" per 5 ft.	00000000	00000	000000	000000
2"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
3/4" Thick. (-0.007" to 0.007" Tolerance)
3/4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
1"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
2"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	00000000
1" Thick. (-0.008" to 0.008" Tolerance)
1"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
2"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	000000
4"	ASTM B187	3/4" per 5 ft.	00000000	000000	000000	00000000