About Cam Latches and Locks
More
About Push-to-Close Latches
More
Push-Button Tight-Hold Paddle-Handle Lever Cam Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/165/1653a213p1-h02d-digital@halfx_637014298312754385.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/165/1653a13-@halfx_637189930618878222.png?ver=imagenotfound)
Also known as compression cams, these latches have an adjustable screw instead of a standard cam, so you can easily adjust the latching distance and tension over time. Press the button and the handle pops open; fold the handle into the recess to keep it out of the way and to secure the latch.
Nylon plastic latches withstand damp and humid environments.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Lg. | Wd. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Raised Push Button | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
3/16" | 1/16"-15/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 2 1/2" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 000000 |
3/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
3/16" | 1/16"-15/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 2 1/2" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
3/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
Flush Push Button | ||||||||||||||
Black Powder-Coated Zinc | ||||||||||||||
3/16" | 1/16"-15/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 2 1/2" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 0000000 | 00000 |
3/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
3/16" | 1/16"-15/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 2 1/2" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 0000000 | 00000 |
3/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3/4" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 0000000 | 00000 |
Black Nylon Plastic | ||||||||||||||
1/8" | 1/16"-1" | 3 3/8" | 1" | 2 3/16" | 13/16" | 1 5/8" | 1 7/16" | 7/8" | 5/8" | Yes | 50 | Metal, Plastic, Wood | 00000000 | 00000 |
Lift-and-Turn Tight-Hold Paddle-Handle Cam Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/161/1619a18p1-h02d-digital@halfx_637014026372935947.png?ver=imagenotfound)
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use. Often used on cabinet doors and file drawers, these latches have a metal arm that swings to lock. All can be adjusted to a range of latching distances, which is useful if you don’t know the precise measurements. When mounting the cam, adjust the latching distance and choose your turn direction.
Zinc latches have a reversible offset cam that can be mounted in two different ways, which means these latches have two different latching distance ranges.
Nylon plastic latches withstand damp and humid environments.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Handle | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance Range | Lg. | Wd. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Max. Clamping Force, lbs. | Mounting Fasteners Included | For Use On | Each | |
Black Painted Zinc | ||||||||||||||
1/8" | 3/16"-3/8" (Short) 1 3/8"-1 9/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 000000 |
1/8" | 7/16"-5/8" (Short) 1 1/8"-1 5/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/4"-5/8" (Short) 2 1/4"-2 9/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" (Short) 1 13/16"-2 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" (Short) 1 7/16"-1 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||
1/8" | 3/16"-3/8" (Short) 1 3/8"-1 9/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/8" | 7/16"-5/8" (Short) 1 1/8"-1 5/16" (Long) | 1 5/8" | 11/16" | 1 13/16" | 7/8" | 1/16" | 1 3/8" | 1 1/16" | 1/2" | 50 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1/4"-5/8" (Short) 2 1/4"-2 9/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" (Short) 1 13/16"-2 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" (Short) 1 7/16"-1 13/16" (Long) | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | 100 | Yes | Metal, Plastic, Wood | 0000000 | 00000 |
Black Nylon Plastic | ||||||||||||||
1/8" | 1 9/16"-1 11/16" | 2 13/16" | 1 1/8" | 3 5/16" | 1" | 1/4" | 1 11/16" | 1 9/16" | 9/16" | 65 | Yes | Metal, Plastic, Wood | 00000000 | 00000 |
Washdown Push-Button Tight-Hold Paddle-Handle Lever Cam Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/150/1502n11p1-h02d-digital@halfx_637014162773612048.png?ver=imagenotfound)
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Lg. | Wd. | Handle Lg. | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||||
5/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3 5/16" | 2 1/4" | 9/16" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 000000 |
Chrome-Plated Zinc—Polished | |||||||||||||
5/16" | 1/16"-15/16" | 3 3/8" | 1" | 1 1/2" | 2 1/2" | 1 3/8" | 5/8" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 00000 |
5/16" | 15/16"-1 13/16" | 3 3/8" | 1" | 1 1/2" | 3 5/16" | 2 1/4" | 9/16" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 00000 |
Push-Button Tight-Hold Paddle-Handle Keyed Alike Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/165/1653a423p2-uph02-@halfx_637587393573597672.png?ver=imagenotfound)
Press the button and the handle snaps open; push the handle shut for a secure hold. Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Offset Cam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key Number | Lg. | Wd. | Handle Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Powder-Coated Zinc | |||||||||||||
1/4" | 1/16"-15/16" | CH751 | 3 3/8" | 1" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 000000 |
1/4" | 15/16"-1 13/16" | CH751 | 3 3/8" | 1" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
Chrome-Plated Zinc—Brushed | |||||||||||||
1/4" | 1/16"-15/16" | CH751 | 3 3/8" | 1" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
1/4" | 15/16"-1 13/16" | CH751 | 3 3/8" | 1" | 7/8" | 3 5/16" | 7/8" | 5/8" | Yes | 250 | Metal, Plastic, Wood | 00000000 | 00000 |
Washdown Push-Button Tight-Hold Paddle-Handle Keyed Alike Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/203/2033n11p2-uph02-@halfx_637587385559143271.png?ver=imagenotfound)
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold. Choose these locks if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Key Number | Lg. | Wd. | Handle Lg. | Rear Projection | Lg. | Offset Cam Width | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | ||||||||||||||
5/16" | 1/16"-15/16" | CH751 | 3 3/8" | 1" | 1 1/2" | 2 1/2" | 1 3/8" | 5/8" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 000000 |
5/16" | 15/16"-1 13/16" | CH751 | 3 3/8" | 1" | 1 1/2" | 3 5/16" | 2 1/4" | 9/16" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 00000 |
Chrome-Plated Zinc—Brushed | ||||||||||||||
5/16" | 1/16"-15/16" | CH751 | 3 3/8" | 1" | 1 1/2" | 2 1/2" | 1 3/8" | 5/8" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 00000 |
5/16" | 15/16"-1 13/16" | CH751 | 3 3/8" | 1" | 1 1/2" | 3 5/16" | 2 1/4" | 9/16" | Yes | 45 | Metal, Plastic | IP65, NEMA 4 | 0000000 | 00000 |
Lift-and-Turn Tight-Hold Paddle-Handle Keyed Alike Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/161/1619a25p2-uph02-@halfx_637587387142410251.png?ver=imagenotfound)
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Choose them if you need several locks that open with the same key. Select the turn direction when mounting the cam. Each lock comes with a reversible offset cam to provide variable latching-distance ranges depending on the cam position.
For technical drawings and 3-D models, click on a part number.
Latching Distance | For Through Hole | Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Short | Long | Key Number | Lg. | Wd. | Lg. | Wd. | Projection | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Each | |
Black Painted Zinc | ||||||||||||||||
1/4" | 1/4"-5/8" | 2 1/4"-2 9/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 000000 |
1/4" | 5/8"-1" | 1 13/16"-2 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" | 1 7/16"-1 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
Chrome-Plated Zinc—Polished | ||||||||||||||||
1/4" | 1/4"-5/8" | 2 1/4"-2 9/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 5/8"-1" | 1 13/16"-2 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
1/4" | 1 1/16"-1 3/8" | 1 7/16"-1 13/16" | CH751 | 2 7/8" | 1 3/16" | 3 3/8" | 1 5/8" | 3/16" | 2 1/4" | 1 11/16" | 5/8" | Yes | 100 | Metal, Plastic, Wood | 0000000 | 00000 |
Tight-Hold Paddle-Handle Phillips-Drive Lever Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/520/5207n11-@halfx_kjhuw_1720537239.png?ver=imagenotfound)
Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. To open, press the button to pop the handle out; push the handle shut to close. When you push the handle, a lever raises to press your door or drawer closed with an attached screw. Also known as compression cam locks, the lever on these locks creates a tighter seal than a rotating cam, so they’re better at reducing rattling from vibration. Turn the screw on the lever to adjust the latching distance and tension over time. To help your sealed enclosure maintain its IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. They also help keep out dust, dirt, and precipitation. These locks have a flush design and their handle folds into a recessed position, so they stay out of the way. However, they might extend further into your enclosure than locks with a standard profile.
For technical drawings and 3-D models, click on a part number.
For Through Hole | Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | Drive Size | Lg. | Wd. | Lg. | Wd. | Rear Projection | Lg. | Wd. | Mounting Fasteners Included | Max. Clamping Force, lbs. | For Use On | Environmental Rating | Each | |
Black Powder-Coated Zinc | |||||||||||||||
5/16" | 1/16"-15/16" | No. 2 | 3 3/8" | 1" | 2 1/8" | 3/4" | 2 1/4" | 1 3/8" | 5/8" | Yes | 45 | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 000000 |
5/16" | 15/16"-1 13/16" | No. 2 | 3 3/8" | 1" | 2 1/8" | 3/4" | 3 1/8" | 2 1/4" | 9/16" | Yes | 45 | Metal, Plastic, Wood | IP65, NEMA 4 | 0000000 | 00000 |
Paddle-Handle Push-to-Close Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/115/11585a13p1-h02d-digital@halfx_637014341680953747.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1675a1p1-h02d-digital@halfx_637014192242907101.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/115/11585a77p1-h02d-digital@halfx_637014384648224977.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a26p1-h02d-digital@halfx_637014393523123237.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a25p1-h02d-digital@halfx_637014213573216190.png?ver=imagenotfound)
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/115/11585a13p1-h02d-digital@halfx_637014341680953747.png?ver=imagenotfound)
For Cutout | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Each | |
Black Painted Steel | ||||||||||
1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 3/8" | 5/16" | Yes | 00000000 | 000000 |
3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
Zinc-Plated Steel—Dull | ||||||||||
1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 3/8" | 5/16" | Yes | 00000000 | 00000 |
3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
304 Stainless Steel—Dull | ||||||||||
1/16" | 1/8" | 1" | 1 9/16" | 1 1/8" | 1 3/4" | 5/16" | 7/16" | Yes | 00000000 | 00000 |
1/16" | 3/16" | 1 7/16" | 1 7/8" | 1 7/8" | 2 1/4" | 1" | 1/2" | Yes | 00000000 | 00000 |
1/4" | 5/16" | 2 3/16" | 2 13/16" | 2 11/16" | 3 5/16" | 1 7/16" | 5/16" | Yes | 00000000 | 00000 |
3/8" | 15/32" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1675a1p1-h02d-digital@halfx_637014192242907101.png?ver=imagenotfound)
For Cutout | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Each | |
Nickel-Plated Steel—Dull | ||||||||||||
1/8" | 1/8" | 1 1/2" | 2" | 2" | 2 5/8" | 11/16" | 5/16" | 1 5/8", 2 1/4" | No | No. 6 | 000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/115/11585a77p1-h02d-digital@halfx_637014384648224977.png?ver=imagenotfound)
For Cutout | Mounting Hole | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Ctr.-to-Ctr. | Thread Size | Dp. | Fasteners Included | Screw Size | Each | |
300 Series Stainless Steel—Dull | ||||||||||||||
3/16" | 3/16" | 3 1/8" | 2" | 3 5/16" | 2 1/4" | 1/2" | 1/4" | 2" | 8-32 | 0.25" | No | No. 8 | 00000000 | 0000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a26p1-h02d-digital@halfx_637014393523123237.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a25p1-h02d-digital@halfx_637014213573216190.png?ver=imagenotfound)
To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
For Cutout | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Door Mounting Location | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Orientation | Fasteners Included | Screw Size | Each | |
Zinc-Plated Steel—Dull | |||||||||||||||
1/8" | Left Side | 1/4" | 1 15/16" | 1 3/8" | 3" | 1 3/8" | 3/4" | 1/2" | 1/4" | 2 1/2" | Vertical | No | No. 8 | 0000000 | 00000 |
1/8" | Right Side | 1/4" | 1 15/16" | 1 3/8" | 3" | 1 3/8" | 3/4" | 1/2" | 1/4" | 2 1/2" | Vertical | No | No. 8 | 0000000 | 0000 |
Paddle-Handle Keyed Push-to-Close Locks
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers. They're keyed alike, choose them if you need several locks that open with the same key.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/115/11585a21p1-h02d-digital@halfx_637014421410952181.png?ver=imagenotfound)
For Cutout | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Key Number | No. of Keys Included | Each | |
Black Painted Steel | ||||||||||||
3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | CH751 | 2 | 00000000 | 000000 |
304 Stainless Steel—Dull | ||||||||||||
3/8" | 1/2" | 3 1/4" | 4 1/4" | 4" | 5" | 1 15/16" | 7/16" | Yes | CH751 | 2 | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1675a3p1-h02d-digital@halfx_637014260554524368.png?ver=imagenotfound)
For Cutout | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Key Number | No. of Keys Included | Each | |
Nickel-Plated Steel—Dull | ||||||||||||||
1/8" | 1/8" | 1 1/2" | 3 3/16" | 2" | 3 1/2" | 11/16" | 5/16" | 1 5/8", 2 7/8" | No | No. 6 | CH501 | 1 | 000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/151/1517a42p1-h02d-digital@halfx_637014291846202450.png?ver=imagenotfound)
For Cutout | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Max. Latching Distance | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Latch Bolt Projection | Mounting Fasteners Included | Key Number | No. of Keys Included | Each | |
Zinc-Plated Steel—Dull | |||||||||||||
1/8" | 1/4" | 1 3/8" | 1 15/16" | 1" | 2 3/4" | 7/8" | 1/2" | 1/4" | Yes | CAT60 | 2 | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a14p1-h02d-digital@halfx_637014002657688896.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/170/1709a12p1-h02d-digital@halfx_637014150495297412.png?ver=imagenotfound)
To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side lock; if the hinges are on the left, order a left-side lock.
For Cutout | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Door Mounting Location | Wd. | Ht. | Wd. | Ht. | Projection | Rear Projection | Latch Bolt Projection | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Key Number | No. of Keys Included | Each | |
Zinc-Plated Steel—Dull | |||||||||||||||
1/8" | Left Side | 1 3/8" | 1 15/16" | 1 3/8" | 3" | 3/4" | 1/2" | 1/4" | 2 1/2" | No | No. 8 | CAT60 | 2 | 0000000 | 000000 |
1/8" | Right Side | 1 3/8" | 1 15/16" | 1 3/8" | 3" | 3/4" | 1/2" | 1/4" | 2 1/2" | No | No. 8 | CAT60 | 2 | 0000000 | 00000 |
Paddle-Handle Multipoint Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/138/13835a85p2-h02d-digital@halfx_637014089948563533.png?ver=imagenotfound)
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount this latch vertically or horizontally. It has two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
For technical drawings and 3-D models, click on a part number.
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Includes | Each | |
Mortise Mount | ||||||||||||||
Zinc-Plated Steel with Black Painted Zinc Handle | ||||||||||||||
2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 0000000 |
Paddle-Handle Multipoint Locks
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors. The handle does not latch. Mount these latches vertically or horizontally. They have two connecting rods that can be cut to fit 3-ft. to 8-ft. high doors.
Choose keyed alike locks when you need several locks that open with the same key.
Keyed differently locks each open with a different key.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/138/13835a87p2-h02d-digital@halfx_637014206699358035.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/key/keyedalike-h02d-digital-master1565818372-p9@halfx_637014352027421992.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/key/keyeddifferently-h02d-digital-master1565818372-p9@halfx_637014029234960245.png?ver=imagenotfound)
Latch Bolt Housing | For Cutout | Latch Bolt | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Keying | For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Projection | Rear Projection | Projection | Material | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | No. of Keys Included | Includes | Each | |
Mortise Mount | ||||||||||||||||
Zinc-Plated Steel with Black Powder Coated Zinc Handle | ||||||||||||||||
Keyed Alike | 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | 2 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 0000000 | 0000000 |
Keyed Differently | 2" | 4 1/2" | 2 1/4" | 4" | 1 11/16" | 1 3/16" | 1 13/16" | 5/8" | Plastic | 1 1/4", 1 3/4" | No | No. 10 | 2 | Mounting Bracket, Two 1/4" Dia. × 48" Lg. Connecting Rods | 00000000 | 000000 |
For Keying | Key Number | Each | |
Keyed Alike | TM904 | 0000000 | 000000 |
T-Slotted Framing Locks and Latches
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/313/3136n677-@halfx_1696953049.png?ver=imagenotfound)
Push-to-close latches have a return spring to snap tight with a push and release with a pull.
For Rail Ht. | |||||||||
---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | Color | Material | Wd. | Ht. | Mounting Fasteners Included | Each | |
Rail-to-Rail | |||||||||
Push-to-Close Latches with Paddle Handle | |||||||||
40mm | 80mm | 120mm | Gray | Plastic | 3 3/8" | 1 9/16" | Yes | 00000000 | 000000 |