To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn latches, they have an arm that rotates 90° to secure your enclosures.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Select the turn direction when mounting the cam. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from damaging paint or metal chips. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

For technical drawings and 3-D models, click on a part number.

Maintain an IP65 rating on your sealed enclosure for low-pressure washdowns. A key shutter on these locks adds another layer of protection to guard the cylinder from water and dust. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. All locks can be locked with a key as well as a padlock for enhanced security. Choose them if you need locks that each open with a different key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from damaging paint or metal chips. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

For technical drawings and 3-D models, click on a part number.

Simplify your enclosure’s keying system—these locks open and close with a slotted screwdriver. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures. Add a padlock for extra security. A gasket prevents water, dust, and dirt from getting into your enclosure through the lock. This helps you maintain the IP65 and NEMA 4 ratings of your sealed enclosure. These locks come with multiple cams, so you can change their fixed latching distance.

For technical drawings and 3-D models, click on a part number.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The tight hold also reduces rattling from vibration. Add a padlock for extra security, so the handle can’t turn.

These locks include one cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

For technical drawings and 3-D models, click on a part number.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Also known as quarter-turn locks, these locks have a cam that rotates 90° to lock cabinet doors, file drawers, and other enclosures. Add a padlock for extra security. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. This helps you maintain an IP65 and NEMA 4 rating in your sealed enclosure. All come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn locks, they have an arm that rotates 90° to secure your enclosures. All of the locks can be locked with a key as well as a padlock for added security. Choose them if you need several locks that open with the same key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage sensitive electronics inside the enclosure. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these latches are faster to install than those with an adjustable latching distance.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

For technical drawings and 3-D models, click on a part number.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Push the handle in to turn the head a quarter turn and latch. Releasing the handle draws the cam firmly against the door to minimize rattling from vibration. Add a padlock for extra security, so the handle can’t turn.

These latches include one cam that has a fixed latching distance. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Select the turn direction of these latches when mounting the cam. Each latch comes with two straight cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Ideal for high-vibration environments, these latches create a tighter hold than standard cam latches on cabinet doors and file drawers. Also known as compression cam latches, they have a T-handle you turn 90° to latch, then turn it another 90° to draw the cam firmly against your enclosure. The second turn creates compression, which is good for enclosures with a seal. It also reduces rattling from vibration. Add a padlock for extra security. A gasket blocks water, dust, and dirt from getting into a sealed enclosure through the latch, helping you maintain an IP65 and NEMA 4 rating on your enclosure. Made of stainless steel, these latches resist corrosion when exposed to constant moisture. All come with multiple cams for different latching distances.

Latches with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks where precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.

For technical drawings and 3-D models, click on a part number.

To fit in tight areas, these latches have a knob instead of a handle. Turn the knob 90° and the cam rotates to hold your enclosure shut. Use the included hardware to choose which direction the latch rotates 90° or leave out the hardware so the cam rotates 180°. If you add a padlock for extra security, the knob can’t turn.

More secure than locks that open with a hex or slotted driver, these locks open with a square key (sold separately). They match a keying system that is common for industrial enclosures, control cabinets, and other machinery, so you can keep a simple keying system around your facility. Their concealed design stops others from tampering with them using pliers. Add a padlock for extra security. Often called quarter-turn locks, these locks have an attached arm that rotates 90° to lock the enclosure. A seal blocks water, dust, and dirt from getting into a sealed enclosure through the lock, helping you maintain an IP65 rating on your enclosure. All come with multiple cams to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by.

Also known as quarter-turn latches, these latches have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All locks can be locked with a key as well as a padlock. Choose these locks if you need several locks that open with the same key.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. It’s commonly used on industrial enclosures and other machinery, yet it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to add a padlock.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. A gasket keeps dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings.

For technical drawings and 3-D models, click on a part number.

Open and close these locks with a hex key (not included) for an uncomplicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.

For technical drawings and 3-D models, click on a part number.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The cam rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. When locked, the handle lies flat, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to attach a padlock.

A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings. These locks come with multiple cams, so you can change their fixed latching distance.

For technical drawings and 3-D models, click on a part number.

A slotted screwdriver opens and closes these locks, so you can avoid a complicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.

For technical drawings and 3-D models, click on a part number.