McMaster-Carr logo
    Filter by
    System of Measurement
    Adhesive Location
    Overall Thickness
    Spool ID
    Attribute Image
    Material Thickness
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Adhesive Material
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    95 Products

    Antislip Coating Paint Primers for Concrete Floors

    Image of Product. Front orientation. Paint Primers. Antislip Coating Paint Primers for Concrete Floors.
    Use these paint primers on concrete floors before antislip coatings to maximize longevity. They do not contain grit. Apply with a brush or roller. The size listed is the combined total of the two parts.
    Container
    Size, fl. oz.
    Solution
    Type
    Approx. Coverage
    @ Thk.
    Application Time
    After Mixing, hr.
    Color
    Each
    96Solvent Based200 in² @ 2 mil1Amber6198T350000000
     

    Heat-Transfer Epoxy Potting Compounds

    Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
    Jar and Syringe Potting Compounds—Extra Hard
    Image of Product. Front orientation. Potting Compounds. Heat-Transfer Epoxy Potting Compounds, Jar, Syringe.
    Dry Time
    Temp.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Min.
    Max.,
    ° F
    Heating Req. to Reach
    Full Strength
    For Use On
    Color
    Each
    1.5Thin Liquid30264500.21Not Rated5001 hr. @ 250°F Then 1 hr. @ 350°FAluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, Ceramic, GlassAmber7563A52000000
    Jar and Bottle Potting Compounds—Extra Hard
    Image of Product. Front orientation. Potting Compounds. Heat-Transfer Epoxy Potting Compounds, Bottle, Jar.
    Dry Time
    Temp.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Min.
    Max.,
    ° F
    Heating Req. to Reach
    Full Strength
    For Use On
    Color
    Each
    16Thin Liquid30264500.21Not Rated5001 hr. @ 250°F Then 1 hr. @ 350°FAluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, Ceramic, GlassAmber7563A510000000

    Light-Activated Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Light-Activated Surface Fillers, Epoxy, Bottle.

    Epoxy

    Bottle

    Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
    Epoxy—Epoxy fillers provide better adhesion and more corrosion resistance than polyester plastic fillers.
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    3.5Bottle15PuttyNo1"24 in² @ 1/4"1/2"Yes-40270AmberDrill, Sand, TapAluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood73475A14000000
     

    Fuel-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Fuel-Resistant Surface Fillers.
    Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
    1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
    3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
    Container
    Temp.
    Range, ° F
    Size,
    pt.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass2450N12000000
    3Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass2450N11000000
     

    Masking Tape for Electronics

    Image of Product. Front orientation. Masking Tape. Masking Tape for Electronics.
    Use this tape to wrap and splice cables or to mask components while soldering. It dissipates heat and is an excellent electrical insulator.
    Acrylic Plastic Adhesive—Tape with acrylic adhesive resists solvents and chemicals, so it’s often used in labs.
    Silicone Adhesive—Tape with silicone adhesive withstands higher temperatures than tape with acrylic adhesive. It holds fast on engines, generators, and other machines that produce heat.
    ASTM E595—Tape that meets ASTM E595, a standard set by NASA, will produce almost no volatile emissions, even in a high vacuum. It's a great choice for use around your most sensitive electronics.
    3 ft. Long
    15 ft. Long
    108 ft. Long
    Wd.
    Overall
    Thk.
    Temp. Range,
    ° F
    Voltage
    Rating, V
    Dielectric Strength,
    V/mil
    Mil. Spec.
    Specs.
    Met
    Color
    Each
    Each
    Each
    Acrylic Plastic Adhesive
     
    Kapton® Polyimide
    1/4"0.0025"-20 to 3507,000———Amber———07648A73100000———0
    1/4"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A61000000
    3/8"0.0025"-20 to 3507,000———Amber———07648A7320000———0
    3/8"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A6200000
    1/2"0.0025"-20 to 3507,000———Amber———07648A7330000———0
    1/2"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A6300000
    3/4"0.0025"-20 to 3507,000———Amber———07648A73400000———0
    3/4"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A6400000
    1"0.0025"-20 to 3507,000———Amber———07648A73500000———0
    1"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A6500000
    2"0.0025"-20 to 3507,000———Amber———07648A73600000———0
    2"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A66000000
    4"0.0025"-20 to 3507,000———Amber7648A8610000007648A4800000———0
    6"0.0025"-20 to 3507,000———Amber7648A863000007648A49000000———0
    6"0.0025"-20 to 3507,0002,800—ASTM E595Amber———0———07648A69000000
     
    Silicone Adhesive
     
    Kapton® Polyimide
    1/4"0.0025"-40 to 5006,000——UL 510Amber———0———07648A3600000
    1/4"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A7110000———0
    1/4"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A7210000———0
    1/4"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A4600000
    3/8"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A7120000———0
    3/8"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A3700000
    3/8"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A72200000———0
    3/8"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A4700000
    1/2"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A7130000———0
    1/2"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A3200000
    1/2"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A72300000———0
    1/2"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A4200000
    3/4"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A71400000———0
    3/4"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A3300000
    3/4"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A72400000———0
    3/4"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A4300000
    1"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A71500000———0
    1"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A3400000
    1"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A72500000———0
    1"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A44000000
    1 1/2"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A11100000———0
    1 1/2"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A11200000———0
    1 1/2"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A171000000
    2"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber———07648A71600000———0
    2"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A35000000
    2"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber———07648A72600000———0
    2"0.0035"-100 to 50010,0002,850MIL-P-46112UL 510Amber———0———07648A45000000
    4"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber7648A821000007648A71700000———0
    4"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A81000000
    4"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber7648A841000007648A727000000———0
    4"0.0035"-100 to 50010,0004,000MIL-P-46112UL 510Amber———0———07648A91000000
    6"0.0025"-40 to 5006,000—MIL-P-46112UL 510Amber7648A822000007648A718000000———0
    6"0.0025"-40 to 5006,0002,600MIL-P-46112UL 510Amber———0———07648A82000000
    6"0.0035"-100 to 50010,000—MIL-P-46112UL 510Amber7648A842000007648A728000000———0
    6"0.0035"-100 to 50010,0004,000MIL-P-46112UL 510Amber———0———07648A92000000
     

    Masking Tape Shapes for Electronics

    Use these convenient cut shapes to mask holes, fastener heads, and small areas while soldering. This polyimide tape dissipates heat and is an excellent electrical insulator.
    Discs
    Image of Product. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Discs.
    Image of Product. No Spool. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Discs.
    Image of Product. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Discs, Cardboard Spool.

    No Spool

    Cardboard Spool

    Dia.
    Overall
    Thk.
    Material
    Adhesive
    Material
    Temp. Range,
    ° F
    Spool
    Material
    Voltage
    Rating, V
    Mil. Spec.
    Specs.
    Met
    Color
    Pkg.
    Qty.
    Pkg.
    1/4"0.0025"Kapton® PolyimideSilicone-100 to 500—6,000MIL-P-46112UL 510Amber10077595A31000000
    1/4"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber1,00077595A1300000
    3/8"0.0025"Kapton® PolyimideSilicone-100 to 500—6,000MIL-P-46112UL 510Amber10077595A3200000
    3/8"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber1,00077595A1500000
    1/2"0.0025"Kapton® PolyimideSilicone-100 to 500—6,000MIL-P-46112UL 510Amber10077595A3300000
    1/2"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber1,00077595A1700000
    3/4"0.0025"Kapton® PolyimideSilicone-100 to 500—6,000MIL-P-46112UL 510Amber5077595A3400000
    3/4"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber50077595A2200000
    1"0.0025"Kapton® PolyimideSilicone-100 to 500—6,000MIL-P-46112UL 510Amber5077595A3500000
    1"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber25077595A2600000
    1 1/2"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber25077595A61100000
    2"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber25077595A61200000
    4"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber10077595A61300000
    5"0.0025"Kapton® PolyimideSilicone-100 to 500Cardboard6,000MIL-P-46112UL 510Amber10077595A614000000
    Rings
    Image of Product. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Rings.
    Image of Product. No Spool. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Rings.

    No Spool

    OD
    ID
    Overall
    Thk.
    Material
    Adhesive
    Material
    Temp. Range,
    ° F
    Voltage
    Rating, V
    Specs.
    Met
    Color
    Pkg.
    Qty.
    Pkg.
    1/2"5/32"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber4577595A51000000
    1"13/32"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber2577595A5200000
    1 3/4"7/8"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber1777595A5300000
    Rectangles
    Image of Product. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Rectangles.
    Image of Product. No Spool. Front orientation. Masking Tape. Masking Tape Shapes for Electronics, Rectangles.

    No Spool

    Wd.
    Lg.
    Overall
    Thk.
    Material
    Adhesive
    Material
    Temp. Range,
    ° F
    Voltage
    Rating, V
    Specs.
    Met
    Color
    Pkg.
    Qty.
    Pkg.
    1/2"1/2"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber6477595A41000000
    3/4"3/4"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber4077595A4200000
    1"1"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber2577595A4300000
    2"2"0.0025"Kapton® PolyimideSilicone-100 to 5008,000UL 510Amber1577595A4400000

    Urethane Potting Compounds

    Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
    Cartridge
    Image of Product. Front orientation. Potting Compounds. Urethane Potting Compounds, Cartridge.
    Cartridge potting compounds can be applied precisely through the included mixer nozzle. You’ll need a dispensing gun (sold separately).
    Dry Time
    Mfr. Model
    No.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Dielectric Strength,
    V/mil
    Thermal
    Conductivity
    Temp. Range,
    ° F
    For Use On
    Color
    Each
    Loctite® Potting Compounds—Soft
    US26516.76Thin Liquid10161,050Not Rated-85 to 250Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Polycarbonate, Polyurethane Rubber, Ceramic, Glass, ABS, Garolite, Polyimide, PVCAmber7369A46000000
     
    Guns
    For Cartridge
    Size, fl. oz.
    Includes
    Each
    6.76Built-In Plunger for 1:1 and 2:1 Mix Ratios7451A510000000

    Light-Activated Epoxy Potting Compounds

    Image of Product. Front orientation. Potting Compounds. Light-Activated Epoxy Potting Compounds.
    Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat. Since they’re epoxy, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. You need a mixer nozzle (not included) and a gun and plunger (both sold separately) to dispense. The nozzle lets you apply these compounds precisely.
    For maximum effectiveness, these compounds need to be heat cured after they’re cured with UV light. Overall dry time includes heat curing at 149° F.
    Dry Time
    Mfr. Model
    No.
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Mixer Nozzle
    Included
    Mix
    Ratio
    Light Intensity Req.
    to Reach Full Strength
    Cure
    Type
    Dielectric
    Strength
    Thermal
    Conductivity
    Temp. Range,
    ° F
    For Use On
    Color
    Clarity
    Each
    Loctite® Cartridge Potting Compounds—Extra Hard
    33361.4Thick Liquid516No4:160 sec. @ 30 mW/cm²UV LightNot RatedNot Rated-65 to 350Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composite, FiberglassAmberClear1765A36000000
     
    Accessories for Potting Compounds
    Guns
    Image of Product. Front orientation. Adhesive Dispensing Guns. Light-Activated Epoxy Potting Compounds.
    For Cartridge
    Size, fl. oz.
    Includes
    Each
    1.42, 1.691:1 and 2:1 Mix Ratio Plungers1773A32000000
    Cartridge Plungers
    Image of Product. Front orientation. Adhesive Dispensing Gun Cartridge Plungers. Light-Activated Epoxy Potting Compounds.
    For Cartridge
    Size, fl. oz.
    Mix
    Ratio
    Each
    1.424:174695A4400000

    Optically Clear Epoxy Potting Compounds

    Image of Product. Front orientation. Potting Compounds. Optically Clear Epoxy Potting Compounds, Cartridge.

    Cartridge

    Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
    Dry Time
    Container
    Size, fl. oz.
    Consistency
    Touch,
    min.
    Overall,
    hr.
    Mixer Nozzle
    Included
    Mix
    Ratio
    Dielectric Strength,
    V/mil
    Thermal Conductivity,
    W/(m⋅°C)
    Temp. Range,
    ° F
    For Use On
    Color
    Clarity
    Each
    Cartridge Potting Compounds—Extra Hard
    1.7Thick Liquid4024No1:15000.24-65 to 275Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Steel, Stainless Steel, Silver, Plastic, Rubber, Composite, Fiberglass, Ceramic, GlassAmberClear7369A37000000
     
    Accessories for Potting Compounds
    Guns
    For Cartridge Size, fl. oz.
    Includes
    Each
    1.42, 1.58, 1.691:1 and 2:1 Mix Ratio Plungers74695A71000000
    Nozzles
    For Cartridge
    Size, fl. oz.
    No. of Mixing
    Elements
    Each
    1.42, 1.692074695A1200000

    Surface Fillers for Plastic

    Image of Product. Front orientation. 1.7 fl. oz. Container. Surface Fillers for Plastic, Cartridge.

    Cartridge

    Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
    Cartridge—Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Urethane Rubber Surface Fillers
    1.7Cartridge2060Thick LiquidYes1:111 in² @ 1/4"Not RatedNo-20180AmberSandABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF6488T63000000
     
    Accessories and Replacements for Surface Fillers
    Each
    Dispensing Gun for Surface Fillers in a Cartridge6488T710000000
    Primer for Surface Fillers in a Cartridge6488T6400000
    Replacement Mixer Nozzle for Surface Fillers in a Cartridge6488T820000
    back to top