We will reply to your message within an hour.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
Unlike paint that must be diluted, this paint comes ready for use with an air brush.
Mark traffic lanes, parking lots, and factory floors.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
This paint adheres to most types of plastic without sanding or priming.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Use these dyes after anodizing and before sealing to add a decorative appearance.
Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.
No mixing required—these potting compounds come ready to apply.
Shield circuit boards from flux, solder, conformal coatings, and high temperatures.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.
For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.
Choose only the colors you need.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Good for wet environments, the writing from these markers won't come off with water alone.
Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.
These paint crayons work well even on dirty, rusty, and oily surfaces.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
Paint dries immediately when applied to heated metal and won't smear, char, discolor, or peel.
Often used for structural steel parts or layout work, markings from these crayons show through oil- and solvent-based primer coatings. Works on metal surfaces.
Write on glass, metal, paper, and wood.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Make scribe lines on surfaces easy to see with these fast-drying fluids.
Identify high spots, interference points, and improper fit on bearings, gears, and valves.
Easily detect vibration or tampering—this paint becomes brittle once dried and cracks from movement.
Brush on this liquid to mask small surfaces and irregular shapes.
This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.
Use this crepe paper tape for sharp paint lines.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.
Outline and draw attention to safety zones and hazards with this tape.
Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
Add ink to rollers and pads before stenciling.