About Paint and Protective Coatings
More
About Paint and Ink Markers
Paint markers work well even on dirty, rusty, wet, and oily surfaces. They leave textured marks you can feel with your hand.
Ink markers work best on a clean, dry surface. Marks dry faster than paint and are smooth to the touch.
Both paint and ink markers are permanent.
More
Epoxy Coatings
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
| 1/2 | Solvent Based | 4 | 48 | 80 sq. ft. @ 10 mil | 1:1 | 2 | 250° | 50° to 100° | Steel, Iron, Concrete, Wood | Light Blue (Gloss) | 000000 | 000000 |
| 1 | Solvent Based | 4 | 48 | 160 sq. ft. @ 10 mil | 1:1 | 2 | 250° | 50° to 100° | Steel, Iron, Concrete, Wood | Light Blue (Gloss) | 000000 | 00000 |
| Primer (1 gal. Can) | 0000000 | Each | 0000000 |
Paint Markers
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Markers and replacement tips that cannot be sold to the listed areas are restricted due to export and/or product labeling requirements.
Markers | Replacement Tips | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tip Size | Stroke Wd. | For Use On | Drying Time | Application Temp. Range | Cannot Be Sold To | Color | Each | Pkg. Qty. | Pkg. | ||
| Medium | 1.9 mm | Metal, Plastic, Rubber, Wood | 1 min. | -20° F to 150° F | Outside United States | Light Blue | 000000 | 00000 | 10 | 000000 | 00000 |
| Bold | 4 mm | Metal, Plastic, Rubber, Wood | 2 min. | -20° F to 150° F | __ | Light Blue | 00000000 | 0000 | 12 | 00000000 | 00000 |
Marking Tape
Outline and draw attention to safety zones and hazards with this tape.
Crepe paper tape releases easily for temporary marking.
| Wd. | Lg., ft. | Overall Thick. | Adhesive Type | Temperature Range, °F | Tensile Strength, lbs./in. wd.  | Adhesion to Steel, oz./in. wd. | Color | Each | |
Crepe Paper | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 180 | 0.005" | Rubber | 50° to 130° | 15 | 30 | Light Blue | 00000000 | 00000 |
| 3/4" | 180 | 0.005" | Rubber | 50° to 130° | 15 | 30 | Light Blue | 00000000 | 0000 |
| 1" | 180 | 0.005" | Rubber | 50° to 130° | 15 | 30 | Light Blue | 00000000 | 0000 |
| 2" | 180 | 0.005" | Rubber | 50° to 130° | 15 | 30 | Light Blue | 00000000 | 00000 |
Marking Fluids
Stain metal items such as bearings, springs, nuts, and other components. These fluids repel oil, adhere without flaking and scaling, and won’t interfere with part performance.
Opaque fluids conceal the color of the part.
Fluids that cannot be sold to the listed areas exceed local regulatory limits on VOCs (volatile organic compounds).
| Container Size | Fluid Type | Clarity | Container Type | Color | Cannot Be Sold To | Each | |
| 1 gal. | Liquid | Opaque | Can | Light Blue | Outside United States | 0000000 | 0000000 |