McMaster-Carr logo
    Filter by
    Mixing Required
    Specifications Met
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    For Use With
    Process After Hardening
    For Use Outdoors
    Manufacturer
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Coolant-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Coolant-Resistant Surface Fillers.
    Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
    Container
    Temp.
    Range
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    Min.
    Max.,
    ° F
    Color
    Specs.
    Met
    For Use On
    Each
    Surface Fillers
    16Jug710Thick LiquidNoNot Rated500BrownASTM D3147Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, PTFE, Polyethylene, Polypropylene, Polyimide, Polystyrene, PVC, PVDF0000000000000
     

    Water-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Can, Jar.

    Epoxy

    Jar

    Epoxy

    Can

    Epoxy

    Can, Jar

    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Tube.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Jar, Bottle.
    Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Fillers, Epoxy, Stick.

    Epoxy

    Tube

    Epoxy

    Jar, Bottle

    Epoxy

    Stick

    Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
    Putty—Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
    Paste—Paste fillers resist alkalies, solvents, gasoline, and oil.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Net Wt.,
    oz.
    Type
    Lg.
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    Dia.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Loctite® Fixmaster Underwater Repair Epoxy
    EA 9490—4Stick8"1560 min.PuttyYes—16 in² @ 1/4"1/4"1"YesNot Rated300WhiteMachine, Drill, Sand, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood0000000000000
     
    Epoxy Surface Fillers
    —2—Tube—560 min.PasteYes1:112 in² @ 1/4"1/2"—YesNot Rated200GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    —2—Jar, Bottle—2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"—YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    —2—Jar, Bottle—2024 hr.PasteYes5:18 1/2 in² @ 1/4"1 1/2"—YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    —12—Jar—3024 hr.PasteYes1:185 in² @ 1/4"1"—Yes50210WhiteDrill, SandAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood000000000000
    —14—Can, Jar—2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"—YesNot Rated185WhiteMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    —14—Can, Jar—2024 hr.PasteYes5:162 in² @ 1/4"1 1/2"—YesNot Rated250GrayMachine, Drill, Sand, Saw, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, Galvanized Iron, Galvanized Steel, Plaster, Steel, Titanium, ABS, CPVC, Nylon, Polyimide, PVC, Ceramic, Porcelain, Grout, Concrete, Masonry, Stone, Glass, Fiberglass, Asphalt, Wood000000000000
    —24—Can—3024 hr.PasteYes1:1170 in² @ 1/4"1"—Yes50210WhiteDrill, SandAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood000000000000
    —48—Can—3024 hr.PasteYes1:1340 in² @ 1/4"1"—Yes50210WhiteDrill, SandAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood000000000000
     

    Surface Fillers for Plastic

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Plastic, Epoxy, Stick.
    Image of Product. Front orientation. 1.7 fl. oz. Container. Surface Fillers for Plastic, Cartridge.

    Epoxy

    Stick

    Cartridge

    Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.
    Cartridge—Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).
    Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Net Wt.,
    oz.
    Type
    Lg.
    Begins to
    Harden
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    Dia.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Food Industry
    Std.
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    —4Stick8"20 min.24 hr.PuttyYes—16 in² @ 1/4"1/2"1"Yes-40250Off-WhiteNSF/ANSI 61
    		Drill, Sand, SawABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF0000000000000
    1.7—Cartridge—5 min.30 min.Thick LiquidYes1:111 in² @ 1/4"Not Rated—No-20180Gray—SandABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF000000000000
     
    Urethane Rubber Surface Fillers
    1.7—Cartridge—20 sec.60 min.Thick LiquidYes1:111 in² @ 1/4"Not Rated—No-20180Amber—SandABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF000000000000
    1.7—Cartridge—50 sec.60 min.Thick LiquidYes1:111 in² @ 1/4"Not Rated—No-20180Black—SandABS, CPVC, PETG, Polycarbonate, Polyethylene, Polypropylene, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF000000000000
     
    Accessories and Replacements for Surface Fillers
    Each
    Dispensing Gun for Surface Fillers in a Cartridge00000000000000
    Primer for Surface Fillers in a Cartridge000000000000
    Replacement Mixer Nozzle for Surface Fillers in a Cartridge00000000000

    Surface Filler Patches

    Image of Product. Front orientation. Surface Fillers. Surface Filler Patches.
    Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
    Container
    Type
    Lg.
    Wd.
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Max. Temp.,
    ° F
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    Patch4"6"130Yes1:1Yes425ClearSandAluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood00000000000000
     

    Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Surface Fillers , Epoxy, Mixer Cup.
    Image of Product. Front orientation. Surface Fillers. Surface Fillers , Epoxy, Syringe.

    Epoxy

    Mixer Cup

    Epoxy

    Syringe

    These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Net Wt.,
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Pkg.
    Qty.
    Pkg.
    Loctite® Fixmaster Epoxy
    EA 445—0.12Mixer Cup512 hr.Thick LiquidYes1:11 in² @ 1/4"1/4"Yes-65180GrayMachine, Sand, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood100000000000000
    EA 445—1Mixer Cup512 hr.Thick LiquidYes1:11 in² @ 1/4"1/4"Yes-65180GrayMachine, Sand, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood100000000000000
    EA 9131—0.12Mixer Cup9024 hr.Thick LiquidYes1.5:11 in² @ 1/4"1/4"Yes-65180WhiteMachine, Sand, TapAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood10000000000000
     
    Loctite® Fixmaster Poxy Pak™
    EA 90170.8—Syringe560 min.Thick LiquidYes1:1Not Rated1/4"Yes-65300ClearSandAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Glass, Wood1000000000000
     

    Sealant Primers

    Image of Product. Front orientation. Sealant Primers. Sealant Primers.
    Prepare joints and surfaces to ensure proper sealant adhesion.
    Container
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Drying
    Time
    For Use On
    Choose a
    Color
    Each
    3M
    P5918.5Bottle15 min.Aluminum, Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS, Acrylic Plastic, Polycarbonate, Polystyrene, Polyurethane Rubber, PVC, Concrete, Glass, CPVC, PETG, PVDF, Polyimide, Fiberglass, Wood, Iron, Galvanized IronBlack0000000000000
     
    Dow
    P520012Bottle2 hr.Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS, Polycarbonate, Polystyrene, Polyurethane Rubber, PVC, Glass, CPVC, PETG, PVDF, Polyimide, EPDM, SBR, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron
    Clear
    ,
    Red
    		00000000000000
    PR-120010.9Bottle2 hr.Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Steel, ABS, Polycarbonate, Polystyrene, Polyurethane Rubber, PVC, Glass, CPVC, PETG, PVDF, Polyimide, EPDM, SBR, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron
    Clear
    ,
    Red
    		0000000000000
    PR-120512.3Bottle2 hr.Aluminum, Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS, Polycarbonate, Polystyrene, PVC, CPVC, PETG, PVDF, Polyimide, Ceramic, Iron, Galvanized IronYellow000000000000
     

    Light-Activated Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Light-Activated Surface Fillers, Epoxy, Bottle.
    Image of Product. Front orientation. Surface Fillers. Light-Activated Surface Fillers, Polyester Plastic, Tube.

    Epoxy

    Bottle

    Polyester

    Plastic,

    Tube

    Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
    Epoxy—Epoxy fillers provide better adhesion and more corrosion resistance than polyester plastic fillers.
    Container
    Temp.
    Range, ° F
    Size, fl.
    oz.
    Type
    Begins to
    Harden, sec.
    Reaches Full
    Strength, min.
    Consistency
    Mixing
    Req.
    For Max.
    Crack Wd.
    Approx. Coverage
    @ Thk.
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    3.5Bottle15PuttyNo1"24 in² @ 1/4"1/2"Yes-40270AmberDrill, Sand, TapAluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood00000000000000
     
    Polyester Plastic Surface Fillers
    3.5Tube13PuttyNo1"24 in² @ 1/4"1/2"Yes-40220WhiteDrill, Sand, TapAluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood0000000000000
     

    Epoxy Potting Compounds for Harsh Environments

    Image of Product. Front orientation. Potting Compounds. Epoxy Potting Compounds for Harsh Environments.
    Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments. They resist moisture, salt, and chemicals, so you can use them in corrosive oil, marine, and mining applications. These compounds can also be used within autoclaves. Because they are epoxies, they are rigid, resist wear, and create excellent electrical insulation. They withstand a wide range of temperatures, and this formulation won’t crack or split as components heat up and cool down.
    They come in a cartridge, so you can apply them precisely. To dispense, they require a mixer nozzle and gun (both sold separately).
    Dry
    Time, hr.
    Container
    Size, fl. oz.
    Consistency
    Touch
    Overall
    Mixer Nozzle
    Included
    Mix
    Ratio
    Dielectric Strength,
    V/mil
    Thermal
    Conductivity
    Temp. Range,
    ° F
    Environment
    For Use On
    Autoclavable
    Each
    Cartridge Potting Compounds—Extra Hard
    1.69Thick Liquid1224No2:1500Not Rated-50 to 350Corrosive, Harsh, SubmersibleBrass, Bronze, Cast Iron, Copper, Steel, Stainless Steel, Titanium, Polycarbonate, Polyurethane Rubber, Glass, ABS, CPVC, HDPE, Nylon, PEEK, Polyethylene, Polyimide, Polypropylene, Polystyrene, PVC, PVDF, UHMW PolyethyleneYes0000000000000
     
    Accessories for Potting Compounds
    Guns
    Image of Product. Front orientation. Adhesive Dispensing Guns. Epoxy Potting Compounds for Harsh Environments.
    For Cartridge Size, fl. oz.
    Includes
    Each
    1.42, 1.58, 1.691:1 and 2:1 Mix Ratio Plungers00000000000000
    Nozzles
    Image of Product. Front orientation. Adhesive Dispensing Gun Nozzles. Epoxy Potting Compounds for Harsh Environments.
    For Cartridge
    Size, fl. oz.
    No. of Mixing
    Elements
    Each
    1.42, 1.69200000000000000

    Fuel-Resistant Surface Fillers

    Image of Product. Front orientation. Surface Fillers. Fuel-Resistant Surface Fillers.
    Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.
    1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.
    3 pt. Container—3-pint container can treat a 20-gallon fuel tank.
    Container
    Temp.
    Range, ° F
    Size,
    pt.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After
    Hardening
    For Use On
    Each
    Epoxy Surface Fillers
    1.5Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass0000000000000
    3Can524Thick LiquidYes2:1No7090AmberDrill, Sand, TapAcrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass000000000000
     
    back to top