This paper is double-bagged to keep out contaminants and meets Fed. Std. Class 100 and ISO Class 5 clean room standards.

Print signs, labels, checklists, and packing slips for use around food processing lines without the risk of contaminating the food. A thin layer of aluminum foil is laminated within this paper, so it can be picked up by a metal detector if any piece of it falls into your line.

These note pads come double-bagged to keep out contaminants and meet Fed. Spec. Class 100 and ISO Class 5 clean room standards.

Scribble notes, record measurements, and make plans, even in wet and dirty environments—the sheets in these pads are coated to repel water, oil, mud, and grease.

Take notes, make lists, or doodle.

Protect desks and other surfaces from scratches, writing marks, and stains.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

A coating prevents dust and debris from building up on the abrasive surface.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.

The long sides are angled 75°.

Evenly sand two surfaces at once.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface. These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

These sheets have a long-lasting diamond abrasive.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Quickly attach, remove, and reuse.

These sheets have a long-lasting diamond abrasive.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

Cut to convenient sizes and shapes, these fit most sheet sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Quickly attach, remove, and reuse these hook-and-loop sheets with pole sanders.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Holes allow dust removal when used with a vacuum sander.

Holes allow dust removal when used with a vacuum sander.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.

Multiple layers of abrasive arranged in a pattern create highly consistent finishes.

These belts resist deterioration when used with water or cutting fluids.

These belts have a cushioned layer.

The premium abrasive stays sharp longer.

These belts have a tear-resistant backing.

Operate in a horizontal position, vertical position, or any angle in between.

The insulated housing reduces vibration and won’t transmit cold air to the operator’s hand.

The narrow belt is good for sanding in tight spaces.

Keep hands safely out of the way while deburring, sanding, and polishing workpieces on a lathe.

Slits on both ends of the block allow you to attach sheets over the flat or curved side.

These rubber blocks sand flat surfaces.

The orbital motion produces more consistent finishes than standard disc sanders. Also known as random orbital sanders.

With a built-in water hose that lubricates your work surface and washes away the resulting grit, these sanders are less likely to scratch your surface than other air-powered sanders.

The orbital motion produces consistent finishes. Also known as random orbital sanders.

Use for finishing and light material removal. The orbital motion produces consistent finishes

The small triangular pad reaches into tight corners and spaces.

Reach ceilings and high walls.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Change the insert to accommodate different files.

Jaws clamp down to grip file tangs and shanks securely, but they are easily released to change files.

Also known as newsprint, this paper is a clean, low-cost fill material.

Also known as freezer paper, this paper is appropriate for food contact. A polyethylene coating on one side provides resistance to moisture and tearing.

The raised pattern provides absorbency as well as extra thickness for sharp or heavy items. This paper works well as an interleaving material.

This paper is good as an outer wrap for parcels or as packing fill. Also known as kraft paper.

These pallet liners have a layer of hexagonal cells instead of typical corrugation, so they distribute loads better than standard cardboard liners.

Use these liners between pallets or layers of stacked material, or to reinforce the bottom of shipping boxes.

Shield iron, steel, stainless steel and tin from corrosion.

The multilayered tissue in this wrap soaks up spills and moisture while also insulating and cushioning contents.

Create high quality technical drawings with this vellum paper that is designed to work in laser printers.

Dip these strips into your liquid to quickly test water conditions.

Press onto your magnet and pole locations show up as dark green.